Brown fused aluminua
Brown fused alumina is made of bauxite/anthracite coal. Abrasive tools made by brown fused alumina are suitable for metal with high tensile(like: steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting precision casting, and also for refractory material. Brown fused alumina with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Sand blasting abrasives Fused brown alumina BFA
Brown fused alumina is made of bauxite/anthracite coal. Abrasive tools made by brown fused alumina are suitable for metal with high tensile(like: steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting precision casting, and also for refractory material. Brown fused alumina with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
30/60 mesh garnet sand abrasive for water filter media
Garnet is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, it's used widely for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Contact information
E-mail mia@hxabrasive.com
Mob 008613592570797
Whatsapp +8613592570797
Wechat 13592570797
Skype Mia Wen
High Hardness White fused corundum for sandblasting polishing
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Factory direct white fused alumina sand 2-5mm
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: FEP F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Soft metals sic green carborundum
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green silicon carbide manufacturer
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Coated abrasives BFA brown fused alumina
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250
Maximum service temperature 1850
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA/Brown fused corundum oxide grit price/emery grain
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Hot sale BFA/manufacturer brown aluminum grain
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA brown fused alumina for Refractory material/brown corundum
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA/casting brown fused aluminum oxide
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
brown fused alumina grinding
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA brown fused corundum
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Brown fused alumina polishing
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Brown Fused Corundum grain
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
White Aluminum granules,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White Aluminum granules produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
80 mesh red garnet sand in abrasive
Garnet abrasive is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, Garnet abrasive is used widely for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Al2O3 White Fused Alumina Refractory
White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Product Description
Raw Material
Quartz sand and coal coke (petroleum coke) are produced by high temperature smelting in resistance furnace.
Density
3.2g/cm3
Produce Processing
Quartz sand , coal coke (petroleum coke) and sodium chloride are produced by high temperature smelting in resistance furnace.
Characteristics of silicon carbide
Great hardness,Good thermal conductivity, small coefficient of thermal expansion, stable chemical performance, good wear resistance and brittleness
green carborundum powder physic-chemical properties
SiC
98.5%-99.5%
Fe2O3
0.05-0.1%
F.C
0.1-0.2%
MohsHardness
9.4(min)
Specific Gravity
3.2g/cm3
sample
240#-2000#
green carborundum powder is made of quartz sand, petroleum coke (or coal char), sawdust, salt and other raw materials through high temperature smelting by resistance furnace.
green carborundum powder physic-chemical properties
SiC
98.5%-99.5%
Fe2O3
0.05-0.1%
F.C
0.1-0.2%
MohsHardness
9.4(min)
Specific Gravity
3.2g/cm3
sample
240#-2000#
green carborundum powder is made of quartz sand, petroleum coke (or coal char), sawdust, salt and other raw materials through high temperature smelting by resistance furnace.
white fused alumina corundum,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Feature
High purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance, stable thermal performance.
Its hardness is slightly higher than brown corundum, toughness is slightly lower, grinding ability is strong, calorific value is small, and efficiency is high.
Abrasive tools made from it are suitable for grinding fine-grained abrasives such as high carbon steel, high-speed steel and stainless steel. They can also be used for precision casting and advanced refractory materials.
Partical model
F8#, F10#, F12#, F14#, F16#, F20#, F22#, F24#, F30#, F36#, F40#, F46#, F54#,F60#, F70#, F80#, F90#, F100#, F120#, F150#, F180#, F220#
china manufacture white fused alumina oxide WFA WA
White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Product Name
china manufacture white fused alumina oxide WFA WA
size
0-1mm 1-3mm 3-5mm 5-8mm -100mesh -200mesh -320mesh
Color
white
Raw Material
Aluminum Oxide
Al2O3
99%
Na2O
0.15-0.35%
Fe2O3
0.02-0.08%
Mohs Hardness
9.0
Specific Gravity
3.95g/cm3
Bulk Density
1.75-1.95g/cm3
Sandblasting SiC green silicon carbide grit
Sandblasting SiC green silicon carbide grit is made of quartz sand, petroleum coke (or coal char), salt and other raw materials through high temperature smelting by resistance furnace, Sandblasting SiC green silicon carbide grit presents green & semi-transparent, its hardness and purity are all superior to black Silicon Carbide. Sandblasting SiC green silicon carbide grit have high rigidity with strong cutting force, steady chemical property, and good capacity of heat-transmission and metal-cutting.
Ceramic grinding SiC Green silicon carbide grain
Ceramic grinding SiC Green silicon carbide grain is made of quartz sand, petroleum coke (or coal char), salt and other raw materials through high temperature smelting by resistance furnace, Ceramic grinding SiC Green silicon carbide grain presents green & semi-transparent, its hardness and purity are all superior to black Silicon Carbide. Green Silicon Carbide have high rigidity with strong cutting force, steady chemical property, and good capacity of heat-transmission and metal-cutting.
Green silicon carbide/green SiC sand 40# 46# 54# 60# 70#
Green silicon carbide/green SiC sand 40# 46# 54# 60# 70# is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The microstructure is hexagonal crystal.
Abrasives models:
Grain: 16#,20#,22#,24#,30#,36#,40#,46#,54#,60#,70#,80#,90#,100#,120#,150#,180#,220#,240#
Micropowder: (FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) 240#,280#,320#,360#,400#,500#,600#,4700#,800#,1000#,1200#,1500#
2000#,2500#,3000#,4000#,6000#,8000#,10000#
Free sample White fused corundum for surface cleaning
White fused corundum is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
20 years abrasives white alumina for Surfact treatment
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
99.2-99.6% purity WFA white alumina abrasives
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Grains abrasives green sic
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green sic/green carborundum powder
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green silicon carbide grit
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
BFA Brown Fused Alumina for lapping
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown corundum oxide Brown Fused Alumina
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown fused alumina
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown aluminum granules
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Factory price of brown fused aluminum oxide
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Wholesale green Carborundum for abrasives wheel
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness 9.4
Melting point 2600
Specific gravity 3.2g/cm3
green sic/green carborundum powder
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness 9.4
Melting point 2600
Specific gravity 3.2g/cm3
Bonded Tools Cup Grinding Wheel Abrasive Grains Brown Fused Alumina
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
High quality 95% Al2O3 brown calcined aluminium for coated abrasives
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Supplier abrasive corundum pink is made of alumina powder as the main raw material, suitable for chromium oxide, etc., after smelting at high temperature.Its hardness is similar to white corundum and its toughness is higher than that of white corundum.The abrasive tools made by it have good durability and high finish.It is suitable for precision grinding of gauge, instrument parts, thread workpiece and sample mill.
White Aluminum granules,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White Aluminum granules produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Brown Fused alumina is bauxite, coke, anthracite as main raw materials, made more than 2000 degrees high temperature melting, hitches in arc through the mill grinding, plastic, magnetic separation to iron, screen is divided into a variety of particle size, dense texture, high hardness, particle formed globular.High consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, sandblasting, precision casting, etc., can also be used for manufacturing advanced refractories
Granulated aluminum oxide white for grinding&polishing
Granulated aluminum oxide white was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Water jet cutting garnet sand 80 mesh is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it
is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, Garnet abrasive is used widely
for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life
span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
JIS#150 #180 #220 WFA Al2O3 White aluminum oxide
White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
China Origin High Quality green silicon carbide for spectralite Surface polishing
Green silicon carbide is made of quartz sand, petroleum coke (or coal char), salt and other raw materials through high temperature smelting by resistance furnace, Green Silicon Carbide have high rigidity with strong cutting force, steady chemical property, and good capacity of heat-transmission and metal-cutting.
Green silicon carbide/green sic sand
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green emery powder/polishing carborundum
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
SiC green silicon carbide lapping powder
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness 9.4
Melting point 2600
Specific gravity 3.2g/cm3
green silicon carbide/green sic sand
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness 9.4
Melting point 2600
Specific gravity 3.2g/cm3
Low Price Supply Brown Fused Alumina For bonded abrasives
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250
Maximum service temperature 1850
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown alumina price per ton
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA brown fused alumina
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250
Maximum service temperature 1850
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA brown fused alumina powder for Grinding stone
Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Chemical analysis:
Al2O3(min) 92%
SiO2(max) 2%
Fe2O3(max) 2%
TiO2(max) 4%
Physical characteristics:
color Brown
Mohs Hardness 9.0
Melting point 2250â??
Maximum service temperature 1850â??
Bulk density 1.53-1.99g/cm3
Specific gravity 3.6-3.9g/cm3
Purpose:
1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware
2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium
3.bonded abrasives and coated abrasives
4.surface preparation and finishing
5.Thermal Spraying(Plasma Spraying)
6.Super Refractories, Ceramics and Tiles
7.Lapping & Micro-blasting applications
Other models:
Grain 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder
0-100mesh 0-200mesh 0-320mesh
Grit
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder
(FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Factory direct white fused alumina sand 2-5mm
Factory direct white fused alumina sand 2-5mm is made by Aluminium Oxide powder which is electrically fused at high temperature. Our Factory direct white fused alumina sand 2-5mm has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Professional Manufacturer garnet rough waterjet cutting
Professional Manufacturer garnet rough, also known as "jade sand" or "natural gold steel", has a strong hardness and good acid and alkali resistance, is an island-like structure of aluminum (calcium) silicate.
White Fused Alumina polishing was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
White fused alumina WFA was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Supply WA white corundum powder
WA white corundum powder which is electrically fused at high temperature. Our WA white corundum powder has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Product Application
1. Sandblasting and grinding of metal and non-metal products.
2. Architectural ceramics, special ceramics and process ceramics.
3. Coarse grinding and high-pressure cutting, wear-resistant products, as additives.
4. Resin abrasives, coated with abrasives in sandpaper, gauze and other manufacturers of raw materials.
5. Filtration media - using granular abrasive as the bottom medium of filter bed to purify drinking water or wastewater is a new type of water filtration material at home and abroad, especially suitable for non-ferrous metal mineral processing and oil drilling mud weighting agent.
Brown fused alumina corundum is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications.
Product Details
Brown fused corundum alumina oxide is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications.
Polishing abrasive white carborundum powder
White carborundum powder was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Physical Index
color white
Mohs Hardness 9.0
Melting point 2250
Maximum service temperature 1900
Bulk density 1.75-1.95g/cm3
Real density 1.75-1.95g/cm3
Chemical analysis
Al2O3(min) 99.6%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
TA tabular alumina price
Tabular alumina is made of Al2O3, after ingredients rinding and forming, calcining in high temperature furnace turned to α-Al2O3. Plate crystal, small pores and closed pores and porosity and fused corundum roughly the same, high purity, good volume stability, minimal re-burning shrinkage, for the production of refractory or castable high temperature treatment has good thermal shock stability and bending strength.
SIZE:0.5-1mm , 1-2mm ,1-3mm , 3-6 mm
Garnet is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, it's used widely for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Contact information
E-mail mia@hxabrasive.com
Mob 008613592570797
Whatsapp +8613592570797
Wechat 13592570797
Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Contact information
E-mail mia@hxabrasive.com
Mob 008613592570797
Whatsapp +8613592570797
Wechat 13592570797
Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Contact information
E-mail mia@hxabrasive.com
Mob 008613592570797
Whatsapp +8613592570797
Wechat 13592570797
Skype Mia Wen
Reasonable price manufacturer garnet 80mesh
Garnet 80 mesh is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As almandine garnet, it is the heaviest and hardest of garnets. Duo to suitable hardness, physical properties,it's used widely for water jet cutting, sand blasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
White fused alumina lapping
White fused alumina lapping is made by Aluminium Oxide which is electrically fused at high temperature. Our White fused alumina lapping has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. White fused alumina lapping has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
BFA Brown alumina for coated abrasives
BFA Brown alumina for coated abrasives is made of bauxite/anthracite coal,and smelted in electric-arc furnace of high temperature more than 2000degrees.BFA Brown alumina for coated abrasives is suitable for metal with high tensile like: steel, malleable iron,bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.BFA Brown alumina for coated abrasives is also used for refractory material. Brown alumina abrasive with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Applications of BFA Brown alumina for coated abrasives:
1.sand blasting for aluminum profile/copper material/glass/washed jeans/precise mould
2.grinding for konescope/glass/monocrystalline silicon/lens/jadeware
3.abrasion-proof material for expressway/airstrip/dock/parking lot/stadium
4.bonded abrasives and coated abrasives
5.surface preparation and finishing
6.Thermal Spraying(Plasma Spraying)
7.Super Refractories,Ceramics and Tiles
8.Lapping & Micro-blasting applications
Factory Direct of White fused corundum for sandblasting polishing
White fused corundum is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Product Details
Product description
Green SiC Silicon Carbide is produced basically the same as the black silicon carbide, but different requirements for raw materials. It is smelted in the high temperature resistance furnace. The crystal is of high purity and strong hardness.
our advantage
Green silicon carbide has SIC content 99.1% min & sufficient acid-washing & accurate classification
The certification of ISO9001:2008
Equipped full line of test method.
The laboratory is certified by government Inspection Bureau, that assures its quality stability.
All products will be supplied according to customers different requirement.
Brilliant produce&supply&delivery ability
Flexible price policy
Blasting media 14# 16# White korund grain
White korund grain was made from the high quality alumina by melting above 2000 °C in the electric arc furnace and cooling. White korund oxide is white with the main crystal phase alpha-Al2O3.The White korund produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Product Name
White korund
Material
AL2O3
Al2O3
99.2%
Fe2O3
0.04%
Na2O
0.26%
SIO2
0.02%
Bulk density
3.60g/cm3
Mohs Hardness
9.0
Quality Control
White fused alumina for coated abrasives
White fused alumina for coated abrasives,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White fused alumina for coated abrasives produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
WFA JIS#4000#6000#8000 white fused alumina
White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
High purity Brake linings White Fused Alumina white aluminum oxide
White aluminum oxide,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. white aluminum oxide is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
WA White aluminum oxide sand
WA White aluminum oxide sand is made by Aluminium Oxide which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Manufacturer price white corundum/al2o3 abrasives
Manufacturer price white corundum/al2o3 abrasives which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
20 years experience grinding green carborundum
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green silicon carbide powder abrasives polishing
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
Green Carborundum grit with high purity SiC
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
SiC Green silicon carbide powder price
Green Silicon Carbide is made of petroleum coke and high quality silica as the main raw material, salt as the additive and smelted in the resistance furnace at high temperature.Green crystal, crisp and sharp, and has a certain thermal and electrical conductivity.The micro structure is hexagonal crystal.
Abrasives models:
Grain:
16#, 20#, 22#, 24#, 30#, 36#, 40#, 46#, 54#, 60#, 70#, 80#, 90#, 100#, 120#, 150#, 180#, 220#, 240#
Micro powder:
(FEPA) F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS)240#, 280#, 320#, 360#, 400#, 500#, 600#, 4700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#, 8000#, 10000#
purpose:
1. it are suitable for grinding high-speed,high carbon steel
2.high-grade refractory materials
3.abrasives tool
4.grinding and polishing
5.ceramics
6.sandblasting
Chemical analysis:
SIC(min) 99.05%
SiO2(max) 0.2%
F.Si(max) 0.03%
F.C(max) 0.04%
Fe2O3(max) 0.1%
Physical characteristics:
color green
Nup hardness 2600
Mohs Hardness â?¥9.4
Melting point 2600â??
Specific gravity 3.2g/cm3
WFA white alumina white aluminum oxide abrasive
WFA white alumina white aluminum oxide abrasive is made by Aluminium Oxide which is electrically fused at high temperature. Our WFA white alumina white aluminum oxide abrasive has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. WFA/white aluminum oxide has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
White alumina oxide powder
White alumina oxide powder is electrically fused at high temperature. Our white alumina oxide powder has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Factory direct price white corundum/white fused alumina/white aloxide grit
White aloxide grit is made by Aluminium Oxide which is electrically fused at high temperature. Our White aloxide grit has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Factory direct price white corundum/white fused alumina/white aloxide grit
White aloxide grit is made by Aluminium Oxide which is electrically fused at high temperature. Our White aloxide grit has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
China Origin High Quality WA white aluminum oxide for brake pad
white aluminum oxide is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Foundry Sand Cr2O3 46% For metalcasting
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size
South africa chrome ore lumpy
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Chromite Sand Chrome Ore Supplier
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Refractory Chrome Ore Lumpy
Top quality Chrome Ore Lumpy manufacturer (south africa).The chromite sand is a product of south africa natural chromite ore after crushing and sieving, and its main chemical composition is Cr2O3.
*Melting point of 2150°C
*Good thermal conductivity
*Good resistance to thermal shock
*Excellent resistance to metal penetration or burn-on
*Resists slag attack
*High dimensional stability
application
Casting material
2refractory material
3modeling
4Steel mill drainage
5sand blast
6Descale
7Chilling material
8Sandblasting and rust removal
9The veil of large steel castings to prevent sand sticking on the surface of castings
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
chromite sand chrome ore supplier
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
South africa grade chrome ore
chromite ore for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
south africa foundry chromite sand casting
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chromite Sand Chrome Ore Price Grit/grain/sand
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
South africa grade chrome ore
chromite ore for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
south africa foundry chromite sand casting
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Foundry Grade chrome ore for moulding
Chromite sand , Originally from South Africa ,is a special kind of sand for casting , chromite sand is a natural spinel mainly composed of chromite , Chromite sand foundry used as a highly fireproof sharpener for moulds and cores.
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180�C
Made in china Best Choice Cr2o3 46% chrome ore
chromite sand, Originally from South Africa,is a special kind of sand for casting , chromite sand is a natural spinel mainly composed of chromite , Chromite sand foundry used as a highly fireproof sharpener for moulds and cores.
Product Description
South africa chrome ore foundry sand
South africa chrome ore foundry sand use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The foundry sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3
46.0%min
SiO2
1.0%max
FeO
26.5%max
CaO
0.3%max
MgO
10.0%max
Al2O3
15.5%max
P
0.003%max
S
0.003%max
Cr/Fe
1.55/1
Physical composition
Bulk Density
2.5-3g/cm3
Specific Gravity
4.0-4.8g/cm3
PH Value
7-9
The amount of the acid
2ML max
Percent soil
0.1%max
The sintered
1600
Filling Density
2.6g/cm3
melting temperature
2180°C
Products Show
Packing
1MT BIG BAG
with 4 handles and top spout
1MT BIG BAG
with 4 handles,top spout and buttom spout
1MT BIG BAG
with 2 handles and top spout
Product Description
Factory wholesale best quality chrome ore sand
chrome ore sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3
46.0%min
SiO2
1.0%max
FeO
26.5%max
CaO
0.3%max
MgO
10.0%max
Al2O3
15.5%max
P
0.003%max
S
0.003%max
Cr/Fe
1.55/1
Physical composition
Bulk Density
2.5-3g/cm3
Specific Gravity
4.0-4.8g/cm3
PH Value
7-9
The amount of the acid
2ML max
Percent soil
0.1%max
The sintered
1600
Filling Density
2.6g/cm3
melting temperature
2180°C
Products Show
Packing
1MT BIG BAG
with 4 handles and top spout
1MT BIG BAG
with 4 handles,top spout and buttom spout
1MT BIG BAG
with 2 handles and top spout
Main Application
Chromite Sand in the foundry industry
Its properties enable the material to be used in high duty grey iron and steel foundries as core and mould making sand. Its high thermal conductivity gives it good chilling properties, low thermal expansion gives rise to good dimensional stability. Its basicity being close to neutral allows the use of a wide range of resin bonding systems and inorganic binders, it has a high refractoriness and a broad sieve distribution.
Chromite Sand in the steel industry
In steel production, Chromite Sand is used as well filler for protection of the sliding gate in large steel holding ladles.
chrome ore sand in the glass industry
When ground to a fine flour, Chromite Sand is used for the production of green glass beverage containers.
Product Description
south africa chrome ore sand substitute for chromite sand
chromite sand is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3
46.0%min
SiO2
1.0%max
FeO
26.5%max
CaO
0.3%max
MgO
10.0%max
Al2O3
15.5%max
P
0.003%max
S
0.003%max
Cr/Fe
1.55/1
Physical composition
Bulk Density
2.5-3g/cm3
Specific Gravity
4.0-4.8g/cm3
PH Value
7-9
The amount of the acid
2ML max
Percent soil
0.1%max
The sintered
1600
Filling Density
2.6g/cm3
melting temperature
2180°C
Products Show
Packing
1MT BIG BAG
with 4 handles and top spout
1MT BIG BAG
with 4 handles,top spout and buttom spout
1MT BIG BAG
with 2 handles and top spout
Main Application
Chromite Sand in the foundry industry
Its properties enable the material to be used in high duty grey iron and steel foundries as core and mould making sand. Its high thermal conductivity gives it good chilling properties, low thermal expansion gives rise to good dimensional stability. Its basicity being close to neutral allows the use of a wide range of resin bonding systems and inorganic binders, it has a high refractoriness and a broad sieve distribution.
Chromite Sand in the steel industry
In steel production, Chromite Sand is used as well filler for protection of the sliding gate in large steel holding ladles.
Chromite Sand in the glass industry
When ground to a fine flour, Chromite Sand is used for the production of green glass beverage containers.
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Available size
AFS30-35 AFS35-40 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65
Chromite ore Cr2o3 46% chrome ore for Iron and steel casting
Chromite ore Cr2o3 46% chrome ore for Iron and steel casting
Chromite ore, Originally from South Africa ,is a special kind of sand for casting , chromite sand is a natural spinel mainly composed of chromite , Chromite sand foundry used as a highly fireproof sharpener for moulds and cores.
size:AFS40-45, AFS45-50, AFS50-55
chrome ore foundry sand
chrome ore foundry sand is a product of south africa natural chrome ore after crushing and sieving, and its main chemical composition is Cr2O3.
chrome ore foundry sand avaliable size :AFS40-45 AFS40-45 AFS45-50 AFS 50-55 AFS55-60 AFS55-65
Micro Glass Beads for sandblasting
Micro Glass Beads are made of hardened spherical soda lime glass and are a multi-faceted and commonly used media. Cost effective, ideal where metal contamination is not allowed, and often used to peen difficult to reach part areas.
Full Description :
ï?·Does not cause dimensional change to the base material
ï?·Environmentally friendlier than chemical treatments
ï?·Leave even, spherical impressions on blasted part surface
ï?·Low breakdown rate
ï?·Lower disposal & maintenance costs
ï?·Soda Lime glass does not release toxins (no free silica)
ï?·Suitable for pressure, suction, wet and dry blasting equipment
ï?·Will not contaminate or leave residue on work pieces
Factory Direct of White aluminum oxide for Grinding wheels
White aluminum oxide is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Chromite Sand Chrome Ore Price Grit/grain/sand
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Cr2O3 46% AFS30-35 Top quality foundry chromite sand
Top quality foundry chromite sand manufacturer (south africa).The chromite sand is a product of south africa natural chromite ore after crushing and sieving, and its main chemical composition is Cr2O3.
*Melting point of 2150°C
*Good thermal conductivity
*Good resistance to thermal shock
*Excellent resistance to metal penetration or burn-on
*Resists slag attack
*High dimensional stability
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Available size
AFS30-35 AFS35-40 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65
South Africa chromite sand casting
South Africa chromite sand casting , Originally from South Africa ,is a special kind of sand for casting , chromite sand casting is a natural spinel mainly composed of chromite , Chromite sand casting used as a highly fireproof sharpener for moulds and cores.
Purpose
1 foundry industry
Its properties enable the material to be used in high duty grey iron and steel foundries as core and mould making sand.
2 steel industry
In steel production, Chromite Sand Casting is used as well filler for protection of the sliding gate in large steel holding ladles.
3 glass industry
When ground to a fine flour, Chromite Sand casting is used for the production of green glass beverage containers
Brake linings white aluminum oxide
High purity Brake linings White Fused Alumina white aluminum oxide was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
High purity White fused alumina WFA grit
High purity White fused alumina WFA grit was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Purpose:
1.Bonded abrasives and Coated abrasives
2.Floor/Wall Laminates
3.Thermal Spraying(Plasma Spraying)
4.Lapping & Micro-blasting applications
5.Surface preparation and finishing
6.Super Refractories,Ceramics and Tiles
7.Brake linings
Available sizes;
Grain: 0-1mm 1-3mm 3-5mm 5-8mm
Fine powder: 0-100mesh 0-200mesh 0-320mesh
Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500
(JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000
Chemical analysis:
Al2O3(min) 99%
SiO2(max) 0.4%
Fe2O3(max) 0.2%
Na2O(max) 0.4%
Physical characteristics:
color white
Mohs Hardness 9.0
Melting point 2250
Bulk density 1.75-1.95g/cm3
Real density 3.95g/cm3
