Granulated aluminum oxide white for grinding&polishing
Granulated aluminum oxide white was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Function characteristics of white fused alumina sand: It will not affect the color of the workpiece; It can be used for sand blasting in the process of prohibiting iron powder residue; micro powder grade is very suitable for wet sand blasting and polishing; high processing speed and good quality; the content of iron oxide is very low, which is suitable for sand blasting operation in which iron slag is strictly prohibited; Remove impurities by pickling. White corundum abrasive treatment Many advantages of white fused alumina abrasive contribute to its important application in industry, but the waste of white corundum abrasive used in workpiece processing has become the main problem faced by enterprises. When white fused alumina abrasive is used, abrasive precipitation will occur. Of course, there will be other sundries on the workpiece. If the two are combined, the difficulty of cleaning will be further increased.
Tabular Alumina, with the purity, do not add any additives, and firing contraction completely finished sintered alumina, alumina powder as raw material, after fine grinding, molding, drying, for ultra high temperature furnace with the temperature below the melting point of corundum, quick heat cooling fast under the condition of burning, to form a number of closely with columnar crystal, with high purity,high melting point, grains high hardness, heat load of high strength, low shrinkage, high density and low permeability, good wear resistance, good thermal shock stability etc. Tabular Alumina Usage Specification Chemical composition Bulk Density gcm3 Apparent Porosity Al2O3 Na2O Fe2O3 SiO2 Refractory Size 0 1mm 1-3mm 3-5mm 5-8mm 99.0 0.35 0.2 0.2 3.5 5.0 Fine 200 0 325 0 98.5
White Aluminum granules,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White Aluminum granules produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
White aluminum oxide F2000F1000F800F360F230 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES:
Approximately 50% lighter than metallic media, white aluminum oxide has twice as many particles per pound. The fast-cutting action minimizes damage to thin materials by eliminating surface stresses caused by heavier, slower-cutting media blasting grits. White aluminum oxide blasting media has a wide variety of applications, including cleaning engine heads, valves, pistons and turbine blades in the aircraft and automotive industries. White aluminum oxide is also an excellent choice for preparing a hard surface for painting. White aluminum oxide contains less than 0.2% free silica and is therefore safer to use than sand. The grit size is consistent and cuts much faster than other sand blasting media, leaving a smoother surface. 25kg small bag, 40 bags in one big bag.
White fused alumina for abrasive and refractory belongs to the group of electro-corundum. It is produced by controlled melting of alumina in an electric arc furnace. White fused alumina is iron-free, ultra pure and extremely hard. White fused alumina is produced by fusing calcined alumina in an electric arc furnace under carefully controlled conditions. The material produced is white in color, dense and has predominantly large crystals of alpha alumina. Ingots are crushed, ground, and precision screened in our new sizing plant to obtain very consistent sized fractions. Magnetic iron from crushing is removed by rare earth magnets to ensure very low levels of iron in the finished products. Close sized fractions are available or precision blended to specification. This process ensures a very consistent sizing from coarse to fines which is critical in many applications. White aluminum oxide has white color and a little higher hardness and toughness comparing with the brown one. The grinding tools made of this material are suitable for fine grinding of high carbon steel, high-speed steel and stainless steel, abrasive powder of finer grit size, can also be used for precision casting and high-grade refractory.
White fused aluminum oxide was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Size: 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36, 40, 46, 54, 60, 70, 80, 90, 100, 120, 150, 180, 220. Chemical Composition Al2O399.55% Fe2O30.04% Na2O0.30%. Physical properties True density: 3.95-3.97g/cm3 Bulk density: 1.75-1.95g/cm3 Mohs hardness: 9.0. 25kgs PVC bags+1MT big bag.
Model: White fused alumina F320 Chemical compositions Al2O3: 99.50%min SiO2: 0.04%max Na2O: 0.26%max Fe2O3: 0.05%max. Physical properties Color: White Bulk density: 1.75-1.95g/cm3 Grain density: 3.90g/cm3min Morse hardness: 9 Content of magnetic substance: 0.0023%max. 25kg PVC bags + 1MT big bag
