Water thinnable paint
Used for automotive parts
Application by dip and spary application
Colour:
In selected colours
In 20 ltr drums
Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.
In 20 lts packing
Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems
In 20 ltrs.