Water Thinnable Paint

Anti corrosive paint Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates Colour: Selected colours Viscosity: 80 +/- 10 in ford cup b-4 Solids: 45 +/- 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Surface dry 4-6 hr. Hard dry: 32 -48 hr. Full curing in: 7-8 days Flash point : Above 30 c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/dip/ spray Thinner: P-71 Cross cut adhesion: Passes Bend test 1/2": Passes Resistance to salt spray test: Passes 150 hr. Test Surface preparation mild steel surface: Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results For marine application & chemical atmosphere Polycoat -rop 801 epoxy primer can be used. In 20 lts packing

Heat resiting paint Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c Gives brilliant lustre with excellent weather resisting properties. Colour: Aluminum Solids: 48± 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour. Flash point: Above 30° c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/spray Thinner P-73 Storage life: 6 month Surface preparation: Mild steel surface Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest. Precaution: Not to be used in areas of high acidity or alkalinity Does not cure and remains soft until temperature reaches 200°c At the time of application metal must be at room temperature Avoid applying thick coat since that may cause blistering. Uses: In industry for painting chimney stocks, exhaust sustems In 20 ltrs.

Supplier: Epoxy paint, PU Paint, Water thinnable paints for automotive application, heat resisting paints, anticorrosive paints
Services: Consultancy

No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats. 1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties. 2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc. PRODUCT TECHNICAL DATA No COLOURS White 1. FINISH Smooth and matt 2. COVERAGE 1 coat: 90-100 sq.ft/ltr 2 coats: 60-70 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS NA 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.

Water Proofing Paints

Water Repellent Paint-water Proofing Paint