Anti corrosive paint Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates Colour: Selected colours Viscosity: 80 +/- 10 in ford cup b-4 Solids: 45 +/- 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Surface dry 4-6 hr. Hard dry: 32 -48 hr. Full curing in: 7-8 days Flash point : Above 30 c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/dip/ spray Thinner: P-71 Cross cut adhesion: Passes Bend test 1/2": Passes Resistance to salt spray test: Passes 150 hr. Test Surface preparation mild steel surface: Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results For marine application & chemical atmosphere Polycoat -rop 801 epoxy primer can be used. In 20 lts packing