NOMEX paper-covered aluminium wire
Product introduction: NOMEX paper-covered aluminium wire is made by oxygen free copper rod or aluminum wire rod and T410 type insulating paper wrapping produced by DUPONT USA. It is mainly applied to transformer, electric welding machine, electromagnet or other similar electrical equipment winding. Bare copper (aluminum) wire produced by extrusion process is optimal materials for NOMEX paper-covered aluminium wire
Executive standard: GB/T7673.3-2008 and company standard
Production range:
flat aluminium wire
Narrow edge size a:1.00mm,8.00mm
Broad side size b:3.00mm,25.00mm
copper strap wire
Narrow edge size a:0.90mm,5.60mm
Broad side size b:2.00mm,16.00mm
Copper aluminum round wire
Diameter: Ï?1.7,Ï?8.0
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20,.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20,.
NOMEX paper-covered wire technical index (company standard) NOMEX paper adopt 2mil T410 type NOMEX paper produced by DUPONT USA.
Polyester-imine enameled wire, Thermal class 180.
Good feature: good thermal shock performance, good resistance to softening breakdown at high temperature, excellent performance in mechanical strength, better resistance to solvent and refrigerant.
Defect: easy to hydrolysis in a closed condition.
Application: widely used in high heat resistant requirements of the motor, electric appliance, instrument, electric tools, dry type power transformer windings.
NOMEX paper-covered aluminium wire
Product introduction: NOMEX paper-covered aluminium wire is made by oxygen free copper rod or aluminum wire rod and T410 type insulating paper wrapping produced by DUPONT USA. It is mainly applied to transformer, electric welding machine, electromagnet or other similar electrical equipment winding. Bare copper (aluminum) wire produced by extrusion process is optimal materials for NOMEX paper-covered aluminium wire
Executive standard: GB/T7673.3-2008 and company standard
Production range:
flat aluminium wire
Narrow edge size a:1.00mm8.00mm
Broad side size b:3.00mm25.00mm
copper strap wire
Narrow edge size a:0.90mm5.60mm
Broad side size b:2.00mm16.00mm
Copper aluminum round wire
Diameter: Ï?1.7Ï?8.0
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
NOMEX paper-covered wire technical index (company standard) NOMEX paper adopt 2mil T410 type NOMEX paper produced by DUPONT
Product name: double glass silk covered wire.
Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades.
This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire.
Standard: GB/ t7672-2008.
Production scope:
Aluminum flat wire
Narrow side dimension a:1.00mm -- 6.30mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 © was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 © was/m
Low glass should be closely evenly around the conductor, double glass package copper (aluminum) line of two layers of glass wool around the package direction should be the opposite, and the double glass package copper (aluminum) flat wire insulation thickness should comply with the following table, narrow at the edge of the insulation thickness (B - B) do not make the inspection.
Polyester-imine enameled wire, Thermal class 180.
Good feature: good thermal shock performance, good resistance to softening breakdown at high temperature, excellent performance in mechanical strength, better resistance to solvent and refrigerant.
Defect: easy to hydrolysis in a closed condition.
Application: widely used in high heat resistant requirements of the motor, electric appliance, instrument, electric tools, dry type power transformer windings.
Features :
A. Excellent resistance to abrasion and solvent;
B. Excellent electricity performance;
C. Excellent heat shock, adherence and flexibility;
D. high cut through;
Main Applications:
This kind of polyurethane enameled aluminum wire can be used to make winding wire
demanding light material, high electricity conductivity and good heat dispersing
performance, especially for the winding wire for transforming high frequency signal, such
household appliances as degaussing coil, high frequency transformer, common transformer
and small electric motor;
Product Description:
Polyimide film aluminum wire is a multi-layer polyimide and fluoropolymer dispersion-coated film. The fluoropolymer coating functions as a heat-fusible layer for bonding to magnet wire conductors. It has superior scrape abrasion resistance and exhibits lower frictional properties than wire insulated with other commonly used polyimide materials. Polyimide film
Glass fiber-covered polyester film enamelled copper (aluminum) flat wire
Product Introduction: Glass fiber-covered polyester film enamelled copper (aluminum) flat wire is made of high quality copper (aluminum) wire enamelled by polyester film and single double glass fiber, then dry roasted by insulated paint. This product has the capacity of high electricalbreakdown, temperature-resist grade has four: 130, 155, 180, 200, the product is widely used in electric reactor,transformer, electrical machinery, and other similar electrical winding.
Executive standard: GB/T 7672-2008
Product range:
Aluminum copper flat wire
Narrow edge size a: 0.30-5.60mm
Broad side size b:2.00-16.00mm
Aluminum copper round wire
Diameter size: 1.7-6.0mm
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280©mm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241©mm2/m at 20.
Enamel Coated Round/Flat Wire
Enamelled aluminum wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously.
Enamelled Aluminum Wire is a fundamental part of a winding in every electrical machine or apparatus. Compared to fibrous insulation, enamelled aluminium wire offers a favourable spaceÂ
saving factor together with a high level of breakdown voltage.
The main application of Enamelled Enamelled Aluminium wire is in winding of Motor and Transformers.
Bare Solid Copper Wire,
-
Product Introduction: Vertical winding has temperature-resist grade of C level or above, it satisfies various types of vertical winding, working temperature of long term use is 220. This product is suitable for transformer, electromagnet, electric welding machine and other similar equipment.
Executive standardGB/T7095-2008
Production range
Vertical winding
Narrow edge size a:0.50mm5.00mm Narrow edge size b:3.00mm16.00mm
Recommended conductor width ratio 1.5b/a7.5
If specifications beyond the above range, please contact us
product categories
â?² 220 class polyamideimide enamelled rectangular copper vertical wire
Please contact us if chose other types of enamelled wire
Materials
copper strap wire should be compliant with GB5584.2-2009,specific resistance is not more than 0.017241Ωmm2/m at 20.
Film thickness of enameled flat copper wire should be in accordance with the following Table,
Please contact us if film thickness is specially required.
The name of the product: enameled flat wire.
Low product introduction: paint BaoBian line refers to the oxygen free copper rod or electrical round aluminum rod by a certain specifications of the mold after drawing wire, according to customer requirements, the compatibility with the required heat resistance index and insulating paint, using mold or felt type paint, coating system of multichannel corresponding insulating paint, after baking treatment, make the insulating varnish and the conductor to form a whole.
This product is suitable for winding of transformer, generator, motor, reactor and various electrical equipment.
Standard: GB/ t7095-2008.
Production scope:
Aluminum copper flat wire
Narrow side dimension a:1.00mm -- 5.00mm wide side dimension b:3.00mm -- 16.00mm.
The recommended conductor width is less than 1.5 < b/a < 7.5.
Please contact us if you choose the above range.
Type of products:
The copper (aluminum) flat line of the grade 120(155).
It is a 130-grade polyester enamelled copper (aluminum) flat wire.
The copper (aluminum) flat wire is a class 155.
A flat wire of copper (aluminium) is coated with a 180 - grade polyester resin.
A flat line of copper (aluminum) of 200 - grade polyamide/polyamide-imide composite paints.
If you choose any other enameled wire, please contact us.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m
Usage: 10KV outdoor line, power transmission line
Type of electric clamping: screw press with flat opening
Connect the electrical clamping specification: the gap is 35mm and the maximum opening distance is 65mm
Lever specifications: 1 m * 3, 30 mm, outside diameter Ф lever length and diameter can be customized according to user needs.
Specification: wire diameter: 25mm, 3*1.5m+ 12m.
Length and line size can be customized according to user requirements.
Applicable voltage level: 10KV
Categories: different voltage grade and use the specific environment of grounding line configuration is different, the same voltage grade different using conditions of the specific configuration of the grounding line also is different, the style of the ground rod length, clips, the thickness of the soft copper wire grounding length, grounding method, etc.).Therefore, the user must clearly understand the specific use environment and the correct voltage grade to select the correct type.
Product name: double glass silk covered wire.
Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades.
This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire.
Standard: GB/ t7672-2008.
Production scope:
Aluminum flat wire
Narrow side dimension a:1.00mm -- 6.30mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 Ω was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 Ω was/m
Low glass should be closely evenly around the conductor, double glass package copper (aluminum) line of two layers of glass wool around the package direction should be the opposite, and the double glass package copper (aluminum) flat wire insulation thickness should comply with the following table, narrow at the edge of the insulation thickness (B - B) do not make the inspection.
Bare Copper Electrical Wire Cable,Website:http://www.ybtransformer.com,Bare Conductor Wire
Prefabricated Outdoor Power Distribution Substation is mainly used for AC 50Hz (or 60Hz), voltage 1000V and below the circuit, under the rated load can be continuous long-term work. Usually used in machine tools, mechanical equipment as electrical control lighting and light.
The control transformer is working with the electromagnetic induction principle. The transformer has two sets of coils. Primary and secondary windings. The secondary coil is outside the primary coil. When the primary coil through the AC, the transformer core to produce alternating magnetic field, the secondary coil to produce induced electromotive force. The turns ratio of the Satons transformer coil is equal to the voltage ratio.
Execution standard
GB 1094.1-2 power transformer general rules, power transformer temperature rise
GB 1094.3 power transformer insulation level and insulation test
GB 1094.5 "power transformer capacity to withstand short circuit"
GB/T 6451 technical parameters and requirements of three-phase oil-immersed power transformer
GB/T 15164 load guide for oil-immersed power transformer
IEC76 power transformer
GB 2536 "transformer oil"
800KVA~31500KVA three-phase double-winding non-excitation voltage regulating power transformer:
Introduction:
Our transformers had exported to more than 50 countries in the world up to 200mva 230kv, we offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. QingZhong is a major transformer manufacturer throughout China offers both liquid-filled and dry-type transformers as well as services for complete life-cycle support, including replacement parts and components.
Excellent Materials:
1.Oxygen-free copper lines of lower resistivity, which will become smoother and burr-free after series of additional surface treatment, so the load loss of our transformador is lower and the electric performance is better.
2.High-quality silicon-steel plates which are of lower unit loss, and the no-load of the transformadores is lower.
3.High-quality wooden laminating insulation pieces, which wonâ??t split or move even under the influence of short circuit.
4.Thoroughly filtrated transformadores oil containing less water, gas and impurities, which makes our transformador es work better.
5.High-quality rubber sealing material, which can prevent the transformadores form aging. url:http://www.ybtransformer.com
Brief Description
The insulation non-encapsulated dry-type power transformer is approved by America technology. With the advantages of safety, reliability, environmental friendliness, energy saving, fire and explosion protection, humidity and pollution resistance, strong overload capability, small volume and simple maintenance, and main performance indexes superior to domestic standards such as advanced design, reasonable structure and beautiful appearance, the product is a brand new transformer value-added scheme and is a new-generation energy-saving, safe, green and environmentally-friendly high-tech product!
Our oil-immersed power transformers have stable operation, high safety and efficiency, low price and wide application. Oil-immersed power transformers are integrated with production, sales and installation, with strong strength and good reputation.
Our oil-immersed power transformers have stable operation, high safety and efficiency, low price and wide application. Oil-immersed power transformers are integrated with production, sales and installation, with strong strength and good
Performance parameters of S13 type 10kV double winding series:
Type rated capacity (KVA) connection group label voltage combination (KV) no-load loss (W) load loss no-load current (%) short circuit resistance (%)
High pressure range low Dy Yy.
10 10 Yyn0 / S13 - M -
or
Dyn11 10
6.3
6 + / - 5%
Plus or minus 2 x 2.5%
or
+ 3 x 2.5%
-1 x 2.5% 0.4 40 360 340 2.8 4.0.
S13-M-20, 70, 525, 500, 2.5.
S13-M-30, 30, 80, 630, 600, 2.3.
S13-m-5050 100 910 870 2.0.
S13-m-63, 110, 1040, 1040, 1.9.
S13-m-80 130 1310 1250 1.9.
S13-m-100, 100, 150, 1580, 1580, 1580.
S13-M-125, 125, 170, 1890, 1800, 1.7.
S13-m-160, 200, 2310, 2200 1.6.
S13-M-200, 240, 2730 2600 1.5.
S13-m-250, 250, 290, 3,050, 1.4.
S13-m-315 315340 3830 3650 1.4.
S13-m-400, 4410, 452043001.3.
S13-m-500, 480, 5410, 5150, 5150.
S13-M-630 630 570 6200 6200 1.1.
S13-m-800, 700, 7500, 7500, 1.0.
S13-m-1000, 830, 10300 10300 1.0.
S13-m-1250, 1250, 970, 12000, 0.9.
S13-m-1600 1,170 14500 14500 0.8.
S13-m-2000, 1510, 17800, 17800.0.8, 5.0.
S13-M-2500, 1780 20700 20700 0.7.
S13-m-3150 3150 2100 24300 24300 0.7.
Power distribution transformer is one of the important equipments in power supply and distribution system of industrial and mining enterprises and civil buildings.
Classification:
1.Power transformers are classified by use: boost (power plant 6.3kv / 10.5kv or 10.5kv /110kV, etc.), contact (220kV/110kV or 110kV/ 10.5kv between substations), voltage reduction (distribution 35kV/ 0.4kv or 10.5kv / 0.4kv).
2.Power transformers are classified by phase number: single phase, three phase.
3.Power transformers are classified by insulation media: oil-immersed transformers (flame retardant, non-flame retardant), dry transformers, 110kVSF6 gas insulated transformers. url:http://www.ybtransformer.com
Dry type transformers shall be installed in accordance with the manufacturer's requirements, and shall be equipped with temperature measuring devices, generally 630kVA and above transformers.
A,1000kVA and above oil-immersed transformer shall be equipped with an outdoor signal thermometer and can take distant signals.
Product features:
A, tank using corrugated sheet, it has the respiratory function to compensate for temperature change caused by the oil volume change, so the product without oil storage tank, obviously reduce the height of the transformer.
B, because the corrugated film replaces the storage tank, the transformer oil is isolated from the outside, thus effectively preventing the entry of oxygen and water and the decrease of insulation performance.
C, according to the above five performance, to ensure the oil-immersed transformer within the normal operation of the don't need an oil change, greatly reduces the maintenance cost of transformer, and prolong the service life of the transformer.
D. In addition to the small capacity of copper wire, copper foil is usually used in the cylinder structure.
The high voltage winding adopts multi-layer cylindrical structure to balance the ampere-turns distribution of the winding, the leakage is small, the mechanical strength is high, and the anti-short circuit capability is strong.
E, iron core and winding each adopt the fastening measure, the height of the device, the low voltage lead wire and other fastening parts are equipped with self-locking anti-loose nuts, adopt the non-lifting structure, can withstand the shock of transportation.
F, coil and iron core adopt vacuum drying, the transformer oil adopts vacuum filter oil and oil filling process, which minimizes the moisture in the transformer.
SC(B) type 10 epoxy resin casting dry transformer is manufactured by standard "dry power transformer", which has low performance loss, good energy saving effect, operation economy and maintenance.Besides the advanced technology structure, the anti-short circuit and the lightning impact level are high, it also has the characteristics of resistance, moisture proof, dustproof and low noise.It is widely used in high-rise buildings, airports, stations, terminals, power plants and substations.It is especially suitable for the installation and use of fire-resistant and explosive places.
The standard type transformer produced by our company is not covered with shell, and the protection grade is IP00. If the customer needs to provide the protection grade for IP20 and IP23 shell.The shell can be made of ordinary steel plate, stainless steel plate, aluminum alloy and other materials according to customer's requirements, and it can be treated with acid, phosphating, spraying and etc.The temperature control display instrument and load measuring instrument are installed in the low pressure side of the shell, which is convenient for users to observe and is safe and reliable.
Product features
1. The transformer core is made of imported high quality cold rolled silicon steel, which greatly reduces the no-load loss and no-load current, and the core is bound to ensure the tightness of the core and reduce the noise.
2. The high and low voltage winding is made of anaerobic copper, and the low-voltage winding 500kVA and the following are double-layered cylindrical structures.
A double helix or four-helix structure is used in 630kVA and above. Multi-layer cylindrical structures are used for high voltage windings.
3. The transformer connection group adopts Dyn11 to reduce the influence of harmonics on the power grid and improve the quality of power supply.
4. The transformer is full seal structure, extending service life, free of hanging core and maintenance.
5. The measured noise is below the standard.
After normal transportation, the series of transformers can be installed with relevant parts, and the test of acceptance test can be put into operation.
Characteristic
1.oil immersed test transformer has excellent material selection, reliable quality and good stability
2.the voltage margin, corona sound small, small board
3.the use of new insulation materials, small size, light weight test
Packaging Details:
1.Wrapped with plastic film.
2.Fixed in a wooden case.
3.Wooden case on a pallet.
American prefabricated substations is based on urban and rural power grid construction and development and transformation of the needs of the development of a series of products. It is the transformer body, switchgear, fuses, tap-changers, low-voltage power distribution equipment and other auxiliary equipment for the combination of transformer, to meet the user energy metering, reactive power compensation, low voltage shunt and other preparation requirements. ZGS-type modular transformer as AC 50Hz, 6 ~ 10kV network, rated capacity of 63 ~ 1600kVA independent set of power distribution equipment, both for outdoor use, can also be used indoors. Widely used in industrial parks, urban residential areas, commercial centers, high-rise buildings and temporary construction sites and other places.
Dry type transformers shall be installed in accordance with the manufacturer's requirements, and shall be equipped with temperature measuring devices, generally 630kVA and above transformers.
A,1000kVA and above oil-immersed transformer shall be equipped with an outdoor signal thermometer and can take distant signals.
Product features:
A, tank using corrugated sheet, it has the respiratory function to compensate for temperature change caused by the oil volume change, so the product without oil storage tank, obviously reduce the height of the transformer.
B, because the corrugated film replaces the storage tank, the transformer oil is isolated from the outside, thus effectively preventing the entry of oxygen and water and the decrease of insulation performance.
C, according to the above five performance, to ensure the oil-immersed transformer within the normal operation of the don't need an oil change, greatly reduces the maintenance cost of transformer, and prolong the service life of the transformer.
D. In addition to the small capacity of copper wire, copper foil is usually used in the cylinder structure.
The high voltage winding adopts multi-layer cylindrical structure to balance the ampere-turns distribution of the winding, the leakage is small, the mechanical strength is high, and the anti-short circuit capability is strong.
E, iron core and winding each adopt the fastening measure, the height of the device, the low voltage lead wire and other fastening parts are equipped with self-locking anti-loose nuts, adopt the non-lifting structure, can withstand the shock of transportation.
F, coil and iron core adopt vacuum drying, the transformer oil adopts vacuum filter oil and oil filling process, which minimizes the moisture in the transformer.
Product Description:
1.IEC ISO Certification.
2.Power Transformers .
3.Low noise, environmental protection.
4.Low no-load loss ,energy conservation.
Product Description:
1.IEC ISO Certification.
2.Power Transformers .
3.Low noise, environmental protection.
4.Low no-load loss ,energy conservation.
Conditions of use
1. the ambient temperature: - 50 ~ + 50 .
2. Altitude: less than 1000 m.
3. Any other content beyond the technical requirements shall be handled by the user and the technical department and shall be indicated in the order.
Product Details:
Name:Auto transformer
Usage:Power
Phase:Three
Coil Structure:Thyroidal
Rated capacity:30-3000kvaT
Type:Oil immersed
Input Voltage:5-35kV
Output Voltage:0.4/0.23kV
Material:Copper
Cooling Method:Oil Natural
Frequency:50/60Hz
Rated voltage:20KV
SCB13 dry type power transformer product features.
Low loss: the no-load loss of the product is 20% lower than that of the SCB11 product, and the energy saving effect is excellent, running economy and maintenance free.
Low noise: product noise level is 10 to 15 decibels lower than the current professional standard JB/ t10088-1999 "6-220kv transformer sound level".
Low set: resin mixed materials adopt the most advanced mixing method in foreign countries and vacuum film degassing technology, so that the mixture is evenly mixed and the bubbles in the mixture are excluded.
The product only has extremely low local discharge, can be controlled under 5PC.
The high and low pressure coils are poured under vacuum and pressure, so that the resin insulation can be both encapsulated and inter-turn.
The casting body has a dense solidified structure, which is resistant, explosion-proof and pollution-free.
The glass fiber and other insulating materials of winding coil have self-extinguishing characteristics, which will not cause the electric arc of short circuit, and the resin will not produce poisonous and harmful gas in high heat.
High mechanical strength: packing resin to make casting body expansion coefficient difference is small, small curing shrinkage rate, small internal stress, curing of high hardness, the internal and external surfaces of the high and low voltage coil epoxy resin coating layer, placed with the strengthening of prefabricated molding material, especially as dense as the reinforced concrete structure, and mechanical strength is greater than the pure epoxy resin, can withstand the sudden and short-circuit force without damage.
Fiberglass Covered Aluminum Wire:
FiberGlass covered Aluminum wire is according to customers requirement, aluminum conductor is evenly covered with one or two layers of non-alkali fiberglass, then itâ??s impregnated in compatible insulating coating of required thermal class baked to make a whole between fiberglass and Aluminum conductor (optionally be applied to polyester and polyamide).
Glass Fiber Covered Flat Wire:
The Glass in Fibre Glass Covered Insulated Rectangular Flat Aluminium Wire may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with higher thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish for dielectric strength to improve mechanical properties.
Application:
Fibreglass lapped conductors (bare or enamelled) are very suitable for wingdings of electric motor stators, generators, special transformers and high voltage motors. In general this insulation can be applied where high mechanical strength and high insulation properties are required. It exhibits a very high degree of mechanical and thermal stability.
Bare flat aluminium wire is wire made by oil-free electrician round aluminum rod, electrician flat aluminium wire by continuous extrusionhas advantages of fine surface, burr-free,low resistivity. It can be used as finished product and intermediate product. It is widely used in motor, transformer, electric welder and other similar equipment.
Product Name: non-woven/polyester film covered wire
Product Introduction: non-woven/polyester film covered wire is wire made by oxygen free copper rod or electrical round aluminum bar, and lapped 2-3 layers of polyester film + electrician non-woven for winding wire of insulating layer. The product has better pressure resistance, temperature-resist grade is B 130 , and is mainly used as air-core reactor or other similar equipment. Our company adopt advanced eddy current inspection equipment, make product quality more perfect.
Executive standard: GB/T7673-2008 and company standard
Production range:
flat aluminium wire
Narrow edge size a:1.00mm8.00mm
Broad side size b:3.0mm25.00mm
copper strap wire
Narrow edge size a:0.80mm5.60mm
Broad side size b:2.00mm16.00mm
Copper aluminum round wire
Diameter: Ï?1.7Ï?8.0
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
Product Name: non-woven/polyester film covered wire
Product Introduction: non-woven/polyester film covered wire is wire made by oxygen free copper rod or electrical round aluminum bar, and lapped 2-3 layers of polyester film + electrician non-woven for winding wire of insulating layer. The product has better pressure resistance, temperature-resist grade is B 130 â??, and is mainly used as air-core reactor or other similar equipment. Our company adopt advanced eddy current inspection equipment, make product quality more perfect.
Executive standard: GB/T7673-2008 and company standard
Paper covered wire adds a dramatic touch to floral arrangements and decorative crafts. Blends attractively in artistic designs with real, silk and dried flowers. You can easily add texture & interest to your floral creations by wrapping, tying and coiling this versatile wire. Use with fresh cut flowers, foliage, and dried flowers to reinforce stems. Also use to splice stems and attach flower parts to stems. Available in plain, painted, and fabric coated. The higher the gauge number, the thinner the wire is. Flexible & easy to handle and trims with everyday floral wire cutters. Trims easily with floral wire cutters. Paper covering adds an attractive, natural look . Easy to tie or coil.
The name of the product: polyimide film line.
Low product introduction: this product is on the high quality copper (aluminum) conductor, well-spaced winding and polyimide film and polyimide fluorine compound film, 4.6 after heating composite fluorine 4.6 melt in the history of film, thin film between the conductor and bonded into a whole.
The product has excellent voltage resistance and insulation thickness is thinner, heat resistance up to 220 â??, is mainly used in motor, reactor, electric welding machine or other similar electric product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for producing polyimide film.
Standard: GB/ t7673-2008 and enterprise standards.
Production scope:
Aluminum flat wire
Narrow side size a:1.00mm - 8.00mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m
The polyimide film line should be free of cracking to the bare conductor when the diameter of the round rod is bent and the narrow side is bent.
Product name: cable wrap line.
Low product introduction: cable paper is made up of oxygen free copper rod or electrical round aluminum rod through a certain specification of extrusion mould or annealing treatment after drawing wire, again on the copper (aluminum) conductor winding and two or more than two layers of insulation paper (including telephone paper, cable paper, high voltage cable paper, turn-to-turn insulation paper, etc.) of the winding line, used in oil-immersed transformer coil and other similar electric winding thread.
The electrician bare copper (al) wire produced by extrusion process is the most ideal material for producing cable wrap.
Standard: GB/ t7673-2008.
Production scope:
Aluminum flat wire
Narrow side size: a:1.00mm - 8.00mm.
Wide side size: b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.90mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
The nominal diameter of a conductor: 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 © was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 © was/m
The insulation thickness of the cable paper round (flat) line shall be in accordance with the following requirements or the provisions of the negotiation between the supply and demand parties:
Product Details:
Name:Enameled aluminum wire
Type:Insulated
Application:super enameled wire used for transformer
Conductor Material:Aluminum, Aluminum
Wire Gauge:a:1-10,b:3-16
Standard:IEC, NEMA,GB ,SGS
Certification:UL,SGS,ISO14001,IS09001
Factory history:20 years Manufacturing Experiences
Cooperative Client:oversea 200 customers
Delivery:Timely delivery guarantee url:http://www.ybtransformer.com
Electromagnetic Rewinding Wire
Model NO.: Enameled wire
Certification: ISO9001, UL, RoHS
Application: Transformer, Instrument, Electrical Equipment, Motor, Rectifer
Conductor Material: Aluminium Wire
Model No.: Eal Wire
Conductor Type: Solid
Aluminum Purity: 99.99%
Standard: NEMA/IEC/GB
One 20`Gp Container: 15-18.5t
Transport Package: Winding Wire with Spools(PT15/PT25/PT60)
Origin: Xinxiang, China
Insulation Level: H, F, B
Shape: Round Wire
Color: Golden,Brown,Red,Blue,Pink,
Type: Insulated
Thermal Class: 130c/155c/180c/220c/220c
UL No.: Obmw2.E488661
Product Name: glass-fiber covered enamelled rectangular wire
Product Introduction: Based on customers' requirements, glass-fiber covered enamelled rectangular wire use high quality copper (aluminum) conductor lapped by glass fiber, insulating varnish is soaked and dry roasted in order to bond glass fiber and conductor. Heat resistance index of this product has three levels of 130, 155, 180, 200. This product is widely used in transformer, electromagnet, electric welding machine and other similar equipment.
Executive standardGB/T7672-2008
Production range
copper-clad aluminum flat wire
Narrow edge size a:0.80mm,5.60mm
Broad side size b:2.00mm,16.00mm
If specifications beyond the above range, please contact us
Glass fiber-covered polyester film enamelled copper (aluminum) flat wire
â?�Product Introduction: Glass fiber-covered polyester film enamelled copper (aluminum) flat wire is made of high quality copper (aluminum) wire enamelled by polyester film and single double glass fiber, then dry roasted by insulated paint. This product has the capacity of high electricalbreakdown, temperature-resist grade has four: 130, 155, 180, 200, the product is widely used in electric reactor,transformer, electrical machinery, and other similar electrical winding.
Executive standard: GB/T 7672-2008
â?� Product range:
Aluminum copper flat wire
Narrow edge size a: 0.30-5.60mm
Broad side size b:2.00-16.00mm
Aluminum copper round wire
Diameter size: 1.7-6.0mm
If specifications beyond the above range, please contact us
â?�Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
Film thickness of enamelled aluminum (copper) flat wire should in accordance with the following Table, please contact us if you have special requirements.
Low product introduction: aramid paper is paper by oxygen free copper rod or electrical round aluminum rod through a certain specification of extrusion mould of conductor, home-made aramid paper insulation paper around the package of winding line, mainly used for transformer, electric welding machine, winding magnet or other similar electrical equipment products.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of kevlar paper wrap.
Standard: GB/ t7673-2008 and enterprise standards.
Production scope:
Aluminum flat wire
Narrow side size a:1.00mm - 8.00mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.90mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 Ω was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 Ω was/m
Technical index of paper wrapping line of aramid paper (enterprise standard)
Aramid paper is made of paper with a thickness of 2mil.
The bare stranded copper cable is colloquially known as a rope of two or many copper strands.The bare stranded copper cable has two types: hard copper strand and soft copper strand.There's a big difference between the two, and it's different in their use.
According to the different characteristics of hard copper strand and soft copper strand, they are used in different fields.Hard copper conductor due to its resistance to Zhang Lijiang is knop, small resistance of conductive function is good, so are often used to need to the conductive and asked for a higher place on tension, such as the distribution lines and construction of conductor, and repel and attack power transmission cable.The soft copper strand is usually thinner than the hard copper strand, which has a high conductivity and toughness.The most common thing we get is electrical wiring in the home, which is also used in electrical machinery as a conductor for power cables and communications equipment.
Hard copper stranded wire and soft copper conductor is not so big difference in terms of function, there is no experience with manufacturers easily ignore the gap between the chosen the wrong will cause a lot of damage, so be sure to understand its function to know which one is more suitable for their own use.
Hard copper strand has high tensile strength and high hardness. It is made of copper drawing and cold processing.The soft copper strand is formed on the basis of the hard copper strand by heating it, which is flexible and flexible compared to the hard copper strand.
Introduction of polyimide film line
Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line.
Executive standardGB/T7673-2008 and company standard
Production range
flat aluminium wire
Narrow edge size a:1.00mm8.00mm
Broad side size b:3.00mm25.00mm
copper strap wire
Narrow edge size a:0.80mm5.60mm
Broad side size b:2.00mm16.00mm
Copper aluminum round wire
Diameter1.78.0
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
Product Name: glass-fiber covered enamelled rectangular wire
Product Introduction: Based on customers' requirements, glass-fiber covered enamelled rectangular wire use high quality copper (aluminum) conductor lapped by glass fiber, insulating varnish is soaked and dry roasted in order to bond glass fiber and conductor. Heat resistance index of this product has three levels of 130, 155, 180, 200. This product is widely used in transformer, electromagnet, electric welding machine and other similar equipment.
Executive standardGB/T7672-2008
Production range
copper-clad aluminum flat wire
Narrow edge size a:0.80mm5.60mm
Broad side size b:2.00mm16.00mm
If specifications beyond the above range, please contact us url:http://www.ybtransformer.com
Introduction of polyimide film line
Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line.
Executive standardGB/T7673-2008 and company standard
Production range
flat aluminium wire
Narrow edge size a:1.00mm8.00mm
Broad side size b:3.00mm25.00mm
copper strap wire
Narrow edge size a:0.80mm5.60mm
Broad side size b:2.00mm16.00mm
Copper aluminum round wire
Diameter1.78.0
If specifications beyond the above range, please contact us
Materials
Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280©mm2/m at 20.
Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241©mm2/m at 20.
Product Description:
The present trend of the appearance structure of consumer electronics is designed to be "light, thin, short and small". Well Ascent fine and ultra fine rectangular enamelled  wire has excellent quality and performance, it can be met the requirement of flattening, light-weight, low power consumption and high performance.
Product Details:
Type:Insulated
Application:Relays/Transformers/Motors/Winding
Conductor Material:
Conductor Type:Solid
Insulation Material:Enameled
Product Name:Square / Rectangular Wire
Brand:Yubian
Diameter:0.155-7.5mm
130-grade Polyester Enamelled Copper Flat Wire
Henan YuBian Electric Co., Ltd.
180-grade Polyester Resin Enamelled Aluminium Flat Wire
Henan YuBian Electric Co., Ltd.
Add:Qianlong industrial park Huixian City Henan Province
Introduction:
The property of our flat magnet wire outweigh the round wire which is from 0.07mm to 1.7mm in a cross section, and the flat wire's conductor was insulated accordingly. It will give you a wide-ranged of possibility on your products. In addition, it will contribute to the minimization of volume, weight reduction and enhance the electrical efficiency on our
Henan YuBian Electric Co., Ltd.
Add:Qianlong industrial park Huixian City Henan Province
130-grade Direct Welding Polyurethane Enameled Copper Round Wire
Henan YuBian Electric Co., Ltd.
Double Fiber-glass Covered Copper Wire can also be covered with enameled wire, so that it has the compressive property of the enameled wire and the heat resistance property of the glass wire.
Welcome to contact us and consult the detailed parameters, real - time quotation, price quotation, quality wholesale/supply of double glass wire.
Standard range of dimensions (Aluminium) :
cross-section(mm2): 5 to 120;
width(mm): 400 to 2000;
thickness(mm): 200 to 600;
ratio w/t: <10;
Composite enamelled copper (aluminum) flat wire, it satisfies various types of vertical winding, working temperature of long term use is 220â??. This product is suitable for transformer, electromagnet, electric welding machineand other similar equipment.
Product grade: 180, 200, 220, 240 according to customer requirements.
Paint film: first grade paint film or second grade paint film according to customer requirements.
