The name of the product: polyimide film line.
Low product introduction: this product is on the high quality copper (aluminum) conductor, well-spaced winding and polyimide film and polyimide fluorine compound film, 4.6 after heating composite fluorine 4.6 melt in the history of film, thin film between the conductor and bonded into a whole.
The product has excellent voltage resistance and insulation thickness is thinner, heat resistance up to 220 â??, is mainly used in motor, reactor, electric welding machine or other similar electric product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for producing polyimide film.
Standard: GB/ t7673-2008 and enterprise standards.
Production scope:
Aluminum flat wire
Narrow side size a:1.00mm - 8.00mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m
The polyimide film line should be free of cracking to the bare conductor when the diameter of the round rod is bent and the narrow side is bent.
Introduction of polyimide film line Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line. Executive standardGB/T7673-2008 and company standard Production range flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.00mm25.00mm copper strap wire Narrow edge size a:0.80mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter1.78.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280©mm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241©mm2/m at 20.
Introduction of polyimide film line Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line. Executive standardGB/T7673-2008 and company standard Production range flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.00mm25.00mm copper strap wire Narrow edge size a:0.80mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter1.78.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
Fiberglass mesh. 1m x 50m rolls, 5*5mm mesh, 125gr/m2, color orange Product detailed description: Material: yarn, fiberglass wire Mesh size: 3 mm x 3 mm, 4 mm x 4 mm, 5 mm x 5 mm, 8 mm x 8 mm, 10 mm x 10 mm Weight/square meter: 45g ~195g and 300g. Width: 1 m-2 m. Mostly 1m width. Up to requirement, can be cut to small rolls. Length: 50m , 100m, 300m , 400m, 500m, ect, up to requirement. Application: For building internal and external wall insulation, waterproofing, anti -crack, etc. Colors: White (standard) or other blue green color. Or as your request. Coating glue: our coating glue is produced by germany basf which can keep more than 70% after 28 days naoh test. Usage: It is widely used in reinforcing light wallboard, internal and external wall, building component, and plaster products; besides, they can also be sticked on the back of mosaic, marble and other stone materials of superior-quality. They are the most ideal building materials for reinforcement and are widely used during the innovation process of building materials for external wall. Characteristics: - coated with acrylic-acid copolymer liquid, these products have a flat and clean surface, rich sense of touching and excellent position-fixation - these products are acid-resistant, alkali-resistant and anti-aging. Softness and color can be made according to customers requirement. - the quality of products is stable through the seasons. The products are shrink-wrapped, and their color and quality will not change after the products being stored for 6 months. 1.The plastic bag with straight tube 2.Shrink-wrap film 3.Carton(usually 4pcs/carton, 12pcs/carton, 48pcs/carton) 4.Wooden pallet(usually 36pcs/pallet, 72pcs/ pallet)
Supplier: Epoxy coated wire mesh, window screening, stainless steel wire mesh, iron wire mesh, aluminum alloy wire mesh, pvc coated wire mesh, pe coated wire mesh - hexagonal wire netting, welded wire mesh, wire mesh fences, expanded metal, woven wire mesh in stainless steel, black iron wire
Product Characteristic >Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use >Inside the cable fixtures, splice and clamps >Fully enclosed, protecting >Suitable for outdoor armored, indoor soft cable >Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack >Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties >Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame >Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room. Â communication engine room, jumping fiber, cable and splice one access the essential equipment Technical parameters >Several coupled interfaces >Compact Optical is used for fiber splice, optical adjustment, cable protection and so on >The height 1U is suitable for Cabinet or rack >Conform to ISO/IEC11801 standards -
Supplier: PVC/PE coated wire mesh, welded wire mesh, expanded wire mesh, hexagonal wire mesh, crimped wire mesh, square wire mesh, epoxy coated wire mesh, stainless steel wire mesh, square wire mesh, iron wire mesh, window screening, alumillum alloy wire mesh, fiberglass wire mesh, galvanized iron wire mesh
Services: Produce & sale
Product Name: non-woven/polyester film covered wire Product Introduction: non-woven/polyester film covered wire is wire made by oxygen free copper rod or electrical round aluminum bar, and lapped 2-3 layers of polyester film + electrician non-woven for winding wire of insulating layer. The product has better pressure resistance, temperature-resist grade is B 130 , and is mainly used as air-core reactor or other similar equipment. Our company adopt advanced eddy current inspection equipment, make product quality more perfect. Executive standard: GB/T7673-2008 and company standard Production range: flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.0mm25.00mm copper strap wire Narrow edge size a:0.80mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter: Ï?1.7Ï?8.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
Product Name: non-woven/polyester film covered wire Product Introduction: non-woven/polyester film covered wire is wire made by oxygen free copper rod or electrical round aluminum bar, and lapped 2-3 layers of polyester film + electrician non-woven for winding wire of insulating layer. The product has better pressure resistance, temperature-resist grade is B 130 â??, and is mainly used as air-core reactor or other similar equipment. Our company adopt advanced eddy current inspection equipment, make product quality more perfect. Executive standard: GB/T7673-2008 and company standard
Fiber optic cabinet is a high-capacity, high-density fiber distribution frame, suitable for the composition and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling. Features: With high intensity and anti-erosion performance Cold-rolled zn-al steel frame, electrostatic spraying in the whole surface, nice appearance. Capacity can be flexibly customized as required. Modular structure of Blue splice trays design,Capicity:16 cores/tray. Built-in direct melt unit capable of providing direct connection functionality With secure and reliable fastening and grounding protection devices for the optic fiber Applicable to strap-shaped and non-strap shaped fibers, and inserting installation of SC,FC, ST (additional flange)adapters The angle between the adaptor and the connecting unit face is 30�°, ensuring the curvature radius of fiber and preventing the eyes from being hurted The holes on top and bottom can meet the upper and lower wiring Glass front door (Optional) for your choice, visibility good. RAL 7035 Powder coating ISO Standard ROHS Compliance Telecordia GR-326 CORE compliance for pigtails included in splice trays