This small tyre doubling machine is ideal for any workshop or used tire dealer, used to double or undouble (unpack tires). It is powered by compressed air only so there is no risk of electrocution.
We recommend this doubling machine for small workshops wishing to save space for storing or transport their scrap or part worn tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
For some tyre pyrolysis factories, they want to fill as many tires as possible inside the reactor for pyrolysis to oil. But as we all know that tires contain steel wire which is difficult to press. This time you will need to use a tire cutter to cut tyres into small pieces. But after cutting, the steel wire inside tires will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tire packing machine, you can use it to make several complete tires together, then put them into the reactor. It can not only save the plave, the steel wire inside tires also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
Scrap Tires are an ubiquitous by-product of contemporary social and economic society. Our personal mobility is almost entirely dependent on the pneumatic tire, whether in automobiles, buses or even airplanes. The transport and delivery of most goods is also dependent on the pneumatic tire. To recall an old slogan of the American Trucking Association, "If you got it, a truck brought it", and it goes without saying that the truck was riding on pneumatic tires.
The Scrap tire derived fuel pyrolysis plant can effectively convert waste tire into fuels, like Oil, Carbon Black, and Hydrocarbon Gas etc. Here, the raw material is either waste tire or waste plastic. Then, the recycleables are heated from the reactor to be able to generate fuels, oil, and gas.
1.Using Scrap tire derived fuel pyrolysis plant available for sale, stick to experience an excellent, eco-friendly & cost-effective solution for tyre recycling.
2.On an average, the entire pyrolysis process may lead to a yield of around 45-52% oil, 30-35% charcoal, and 15% gas. The oil produced is mainly made up of diesel, kerosene, benzene, fuel oil & heavy fuel oil. Hence, the produced oil may be further refined and useful for operating any vehicle.
3.The pyrolysis plant pollution has truly get to be the most problem nowadays. Obviously, scrap tire derived fuel pyrolysis plant give you a meaningful strategy to it while promoting an eco-friendly solution by reduction of the hazards of land pollution due to the waste tire.
4.By converting the waste into energy, Scrap tire derived fuel pyrolysis plant offers an alternative energy source too.
Scrap tire derived fuel pyrolysis plant falls beneath the following kinds of industrial projects
1.Waste to energy project
2.Renewable energy project
3.Waste tire and plastic control equipment
4.Petrochemical
Fuel Oil
The fuel oil is between 45 and 52 percent. This fuel oil does apply in power plant factory, ceramic factory, aluminum factory, glass factory, painting factory, boiler system factory and boiler factory.
The proportion found as soon as the recycling is 30 to 35 percent of carbon black. This device works extremely well within the electric cable jacketing, doormat and hose mat, conveyor ban, rubber addictive, automatic spare parts, heat isolation plus more.
Waste tyre pyrolysis plant cost How to convert waste tyres to useful resources Now, it is no longer a problem. With 18 years' experience in the field of tyre pyrolysis, and continuous research, development and improvement, Doing group provides the latest waste tyre pyrolysis plant which has reached a high level in technology.
The Waste tyre pyrolysis plant adopts the new green pyrolysis technology. Through the use of the tire pyrolysis oil plant, waste tyres can be effectively converted to fuel oil, carbon black and steel wire. The oil from tyres plant can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. And it can be used for generators to get electricity.
Carbon black can be used for making construction bricks with clay, and also can be used as fuel. Steel wire can be recycled into smelting plant. The tyre pyrolysis oil market price is quite high in the market, which will surely get you tyre pyrolysis plant cost back soon as well as help relieving energy crisis.
Waste Oil Distillation Plant is project of Doing group use the sludge,waste engine oil, tyre pyrolysis oil,plastic pyrolysis oil, sump oil as raw material, use the special distillation and refining technology to get oil. Waste Waste oil to diesel fuel oil distillation plant can make the oil yield reach as high as 80%-90%. Our company is in the leading level in machinery, technology. marketing, research and development.www(dot)doinggroup()dot
Waste oil to diesel fuel oil distillation plant is self-shunt vacuum distillation unit, distillation system uses a tube furnace (independent research) heating the continuous distillation process under negative pressure to be waste oil distillation.Because the waste oil contains large amounts of water so we should dehydration before distillation.For example, the raw material ( like used engine oil) recovery is more than 90% when the water percentage is less than 5%.www(dot)doinggroup()dot
Waste oil to diesel fuel oil distillation plant can be used for refining waste oil, waste engine oil, sludge, pyrolysis oil (tyre pyrolysis oil and plastic pyrolysis oil) and sump oil into qualified diesel fuel. And the diesel oil can be directly used in low speed engines and generators.
z
More than 250 million scrap tires are generated annually in the United States and their proper management continues to be a solid waste management concern. Sound markets for scrap tires are growing and are consuming an ever increasing percentage of annual generation, with market capacity reaching more than 75 % of annual generation in 1996. Of the three major markets - fuel, civil engineering applications, and ground rubber markets - the use of tires as a fuel is by far the largest market. The major fuel users include cement kilns, pulp and paper mills, electrical generation facilities, and some industrial facilities. www(dot)wastetireoil(dot)com
Scrap tires are an ubiquitous by-product of contemporary social and economic society. Our personal mobility is almost entirely dependent on the pneumatic tire, whether in automobiles, buses or even airplanes. The transport and delivery of most goods is also dependent on the pneumatic tire. To recall an old slogan of the American Trucking Association, "If you got it, a truck brought it", and it goes without saying that the truck was riding on pne umatic tires.
The tire derived fuel recycling pyrolysis plant can effectively convert waste tire into fuels, like Oil, Carbon Black, and Hydrocarbon Gas etc. Here, the raw material is either waste tire or waste plastic. Then, the recycleables are heated from the reactor to be able to generate fuels, oil, and gas.www(dot)wastetireoil(dot)com
1.Using tire derived fuel recycling pyrolysis plant available for sale, stick to experience an excellent, eco-friendly & cost-effective solution for tyre recycling.www(dot)wastetireoil(dot)com
2.On an average, the entire pyrolysis process may lead to a yield of around 45-52% oil, 30-35% charcoal, and 15% gas. The oil produced is mainly made up of diesel, kerosene, benzene, fuel oil & heavy fuel oil. Hence, the produced oil may be further refined and useful for operating any vehicle.www(dot)wastetireoil(dot)com
3.The plant pollution has truly get to be the most problem nowadays. Obviously, scrap tire derived fuel pyrolysis plant give you a meaningful strategy to it while promoting an eco-friendly solution by reduction of the hazards of land pollution due to the waste tire.
Waste plastic pyrolysis to oil plant working process:
Feed waste plastic into the reactor with auto-feeder, seal the reactor gate and begin to heat the reactor by burning fuel materials in the combustion system, the fuel material can be coal, wood, natural gas and fuel oil. There is a thermocouple installed at the oil gas outlet valve to test the temperature of the oil gas, when thermocouple shows a certain temperature, the oil gas will come out and flow into the cooling system and be converted into liquid oil. At the same time, the oil gas conations CH4, C2H6, C3H8, C4H10 and H2 which cannot be cooled under normal pressure will be recycled back to combustion system to burn as fuel material. The dust and sulfur gas will be removed by the dust removing system. After the gas oil run out, there are slags (carbon black) inside of the reactor,.
As a plastic pyrolysis machine manufacturer-DOING will provide customer a good quality machine with adopt fully automatic vacuum carbon black discharging system that extend the service time.
Choosing the suitable raw material is important for customers, it concerns the real profit you can get from your material. Not all kinds of waste plastic can get oil, if you want to get crude fuel oil with high oil yield from waste plastic, please refer to the following form: Here I need to stress that the oil rate only for your reference, as different plastic different result, such as some plastic has very dirty slag, and the plastic is very wet. Let’s see it:
Oil rate from different kinds of plastic:
This project widely used by all over the world, such as recycling center, waste plastic recycling organization, collecting company etc. Waste plastic pyrolysis oil plant has the advantage of small investment and quick recovery costs, is a very good project in the next 5-10 years. If you want to know more information about details, please contact with us.
This small tyre doubling / unpacking machine is ideal for any workshop or used tyre dealer, used to double or undouble (unpack tyres). It is powered by compressed air only so there is no risk of electrocution. We recommend this machine for the tyre dealers wishing to save space for storing or transport their scrap or used tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
Compared to other tTre processing machine, like tire cutting machine, this small tyre doubling / unpacking machine has several main advantages as below:
1. For some tyre dealers, they want to keep complete tyres for further use. So they don't want to cut tires for better storing and transport, then they can use the tyre doubling & unpacking machine to make several tyres nested together firstly. After transport, they can unpack the tyres to normal for further use.
2. For some tyre pyrolysis factories, they want to fill as many tyres as possible inside the reactor for pyrolysis to oil. But as we all know that tyres contain steel wire which is difficult to press. This time you will need to use a tyre cutter to cut tyres into small pieces. But after cutting, the steel wire inside tyres will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tyre doubling machine, you can use it to make several complete tyres together, then put them into the reactor. It can not only save the plave, the steel wire inside tyres also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
3. This tyre doubling / unpacking machine doesn't need electricity to work. It powered by compressed air. which can save so much energy.
4. Tyre doubling / unpacking machine is easier to operate and more efficiently. It can be operated by only one worker, which can make 3 tires nested together within 1 minutes.
So in conclusion, the tyre doubling / unpacking machine can not only save the storage and transport cost, but also save the energy, the labour and the time.
This small tyre doubler is ideal for any workshop or used tyre dealer, used to double or undouble (unpack tyres). It is powered by compressed air only so there is no risk of electrocution. We recommend this machine for the tyre dealers wishing to save space for storing or transport their scrap or used tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
1. For some tyre dealers, they want to keep complete tyres for further use. So they don't want to cut tires for better storing and transport, then they can use the tyre doubler to make several tyres nested together firstly. After transport, they can unpack the tyres to normal for further use.
2. For some tyre pyrolysis factories, they want to fill as many tyres as possible inside the reactor for pyrolysis to oil. But as we all know that tyres contain steel wire which is difficult to press. This time you will need to use a tyre cutter to cut tyres into small pieces. But after cutting, the steel wire inside tyres will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tyre doubler, you can use it to make several complete tyres together, then put them into the reactor. It can not only save the plave, the steel wire inside tyres also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
3. This tyre doubler doesn't need electricity to work. It powered by compressed air. which can save so much energy.
4. Tyre doubler is easier to operate and more efficiently. It can be operated by only one worker, which can make 3 tires nested together within 1 minutes.
So in conclusion, the tyre doubler can not only save the storage and transport cost, but also save the energy, the labour and the time.
Tyre Pyrolysis Plant: The Another Tire Recycling Way, Pyrolysis has been a subject of great concern in the world for many years, and it is also one chemical method of deep renewable processing and utilization as well as technical content. In recent years, the scientists from the US, Japan and European countries have specialized research reports. The technology began to shape and is becoming mature.
The Japanese have successfully got useful chemical materials through 500-900â?? high temperature pyrolysis in 1993. We can get 60kg combustible gas, 400kg high boiling oil, 340kg carbon black, 50kg steel wire, 15kg water and 5kg sludge from 1t waste tires, and the material recovery can reach as high as 90%. The Korean have got 40%-50% fuel oil and 30% carbon black in the high temperature heating by mixing waste tires and waste oil in 1:2 ratio.
The German adopted continuous pyrolysis technology and established pyrolysis plant in the early of 1980s. They used waste tires, waste rubber, waste plastics as raw materials for pyrolysis and obtained carbon black, fuel oil, combustible gas, steel wire, etc.
All of our plants have the features of safe, high-efficiency, energy-saving, environmental friendly, etc. We not only supply you high-quality products, but also first-class service.
www(dot)wastetireoil(dot)com
The introduction and function of tyre compression machine
Tyre compression machine is designed for any used tyre related workshop or tyre dealer. It is perfect solution for cost-effective used tires disposal. The tyre compression machine can doubling or tripling used tires thus creates a huge reduction of volume, which saves more storage and loading space for transport.
Tyre compression machine technical data
Technical parameters
No. Items Contents
1 Machine Tyre compression machine
2 Function Make several tires nested together with reversible unpacking function
3 Advantage Save place for used tyre storing and transport
4 Length 1.35m
5 Width 0.55m
6 Height 0.82m
7 Weight 250kg
8 Power Compressed air without electricity
1.Energy saving and environmental
This tyre compression machine doesn't need electricity to work. It powered by compressed air. Which can save so much energy.
Mechanical operation is absolutely environmental friendly.
2.Benefit for tyre compression machine
Doubling or tribling tyres saves space for storage and loading spacing thus can benefit tyre dealers a lot.
3.Increase feeding capacity for pyrolysis plant
Packing tires together can increase feeding capacity for pyrolysis reactor therefore can get more oil once.
Contact: ms bonnie
Waste tire doubling machine
This small tyre doubling machine is ideal for any workshop or used tire dealer, used to double or undouble (unpack tires). It is powered by compressed air only so there is no risk of electrocution.
We recommend this doubling machine for small workshops wishing to save space for storing or transport their scrap or part worn tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
Waste tire doubling machine technical data
Technical parameters of waste tire doubling machine
No. Items Contents
1 Machine Waste tire doubling machine
2 Function Make several tires nested together with reversible unpacking function
3 Advantage Save place for used tyre storing and transport
4 Length 1.50m
5 Width 0.85m
6 Height 1.12m
7 Weight 200kg
8 Power Compressed air without electricity
9 Pressure 6kg / 6bar / 0.6mpa
For some tyre pyrolysis factories, they want to fill as many tires as possible inside the reactor for pyrolysis to oil. But as we all know that tires contain steel wire which is difficult to press. This time you will need to use a tire cutter to cut tyres into small pieces. But after cutting, the steel wire inside tires will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tire packing machine, you can use it to make several complete tires together, then put them into the reactor. It can not only save the plave, the steel wire inside tires also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
Dy-6t capacity waste plastic pyrolysis to oil plant (d2200mm*l6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.
Dy-8t capacity waste plastic pyrolysis to oil plant (d2200mm*l6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts q245r steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material q245r, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.
Dy-10t capacity waste plastic pyrolysis to oil plant (d2600mm*l6600mm)
1. Working with auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by doing waste plastic pyrolysis to oil plant as an example:
Model Feeding Processing Cooling Discharge Total
2200*6000 1.5hr 7-8hr 1.5hr 1.5hr 12hr
2200*6600 1.5hr 8hr 1.5-2hr 1.5hr 14hr
2600*6600 2 hr 10 hr 2-3 hr 2-3 hr 16-18 hr
Waste plastic pyrolysis to oil plant is a very good investment, not only can efficiently deal with a large number of abandoned tyres, turn waste into treasure, but also can avoid environmental pollution caused by landfill or burning these waste.
Pyrolysis is a thermochemical decomposition of orgnic material at elevated temperatures in the absence of oxygen. Pyrolysis typically occurs under pressure and at the operating temperatures at 430?. Pyrolysis is a special case of thermolysis, and is the most commonly used for organic materials, being, therefore, one of the processed involved in charring. In general, pyrolysis os organic substances produces gas and liquid products and leaves a solid residue richer in carbon content. Extreme pyrolysis, which leaves mostly carbon as the residue, is called carbonization. The process is used heavily in the chemical industry, for example, to produce charcoal, activated carbon, methanol, and other chemicals from wood, to convert ethylene dichloride into vinyl chloride to make PVC, to produce coke from coal, to convert biomass into syngas, to turn waste into safely disposable substances, and for transforming medium-weight hydrocarbons from oil into lighter ones like diesel or gasoline. All these specialized used of pyrolysis may be called various names, such as dry distillation, destructive distillation, or cracking, but all same principle.
For us, we mainly specialized in manufacturing and supplying waste tire/plastic/rubber pyrolysis plant, mostly for processing the rubber products to get fuel oil. On one hand, with the modernization of the society, rubber industry develops at a rapid speed, rubber manufactures are widely used in many field of life. On the other hand, the pollution of scrap rubber or plastics is increasing for its difficulty in disposing safely, which is also called “Black Contamination”, has become a big threat to the environment and is getting increasingly serious.
Sale fully automatic continuous tyre pyrolysis plant
In the early years, the most commonly used pyrolysis plant is mainly the batch operation process, which has low investment but complicated operation process and high labour cost. With the technology improving and customers’ requests, we DOING Company developed a new technology continuous pyrolysis plant. This continuous pyrolysis plant has fully automatic process, which can be controlled by PLC system or computer, thus to save the labour cost. And with the automatic and continuous feeding and discharge system, it can make the the pyrolysis system keep running 24/7 without stop, thus to save the valuable time and energy which are consumed in the batch manual operation system.
Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant.www(dot)wastetireoil(dot)com
You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution.
Waste tyre to oil recycling process pyrolysis plant advantages:
1. One week installation:no need to build foundation thus shorten
the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move.
2. Service life: Special design inside the reactor to avoid direct www(dot)wastetireoil(dot)com
heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization.
3. De-dusting system: "Four in one" de-dusting system can reach
European standard, 100% environmental friendly.also no need building the water pool, saving cement, brick cost, saving time.
4. Cooling system:
A. 36 meters cooling condenser pipe, inner each pipe have 4 small pipe, cooling performance is very good.
B. "Four in one" condensing systems.
Waste tyre to oil recycling process pyrolysis plant final product application
Fuel oil
1. As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc.
2. Final diesel come out from our distillation plant and deodorant
& decolorant can be used in diesel generator.
3. Used in diesel powered cars, such as vans, truck, tractor, etc.
4. Use as heating oil, industrial and home.
Carbon black :www(dot)wastetireoil(dot)com
1. Make it to briquette for fuel.
2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh.
Steel wire:Sell to iron and steel factory
(you can take out steel wire from tyre before pyrolysis)
Waste gas:
1. Recycled into furnace heating reactor instead of coal/wood/oil/natural gas.
2. Storage the exceed gas to restart the next batch.
Doing group continuous waste plastic pyrolysis plant can process 30-50 tons of waste plastics (such as PE, PP, PS, ABS, pure white plastic, pure plastic cable, pure purchase bag etc.)per day, which can work continuously for 24 hours without a stop. In a word, the latest continuous waste plastic pyrolysis plant has the features of small size, small floor area, simple operation, less operator etc. To a large extent, the new device not only saves the operating costs, but also improves the work efficiency.www(dot)doinggroup(dot)com
Continuous waste plastic pyrolysis plant is mainly composed of moving horizontal pyrolysis reactor, hot air circulation heating system, oil gas filter, spray cooling system, secondary fire retardant damper, strong spray de-dusting system, oil gas recycling system, feeder system, discharging system, pressure and temperature multipoint monitoring system, central electric control system. All of parts are manufactured with high-quality materials and advanced technologies, so the quality of this plant can be guaranteed.www(dot)doinggroup(dot)com
The latest continuous waste plastic pyrolysis plant adopts the screw feeding sealing system technology, which is hold by the companyâ??s invention patents, hot air heating furnace circulating heating technology, heat drying technology with high heat exchange efficiency and capacity. Impeccable electrical control system save labor costs. Three waste utilization reasonable recovery can basically realize of zero emissions, safety and environmental protection.
z
Plastic bag is a most important source of plastic waste, which is called white trash. So we must come up with a method to recycle plastic waste to improve the environment.
As a leader in the field of recycling plastic waste, Doing group has a special machine that aims at plastic bag recycling. This plastic bag recycling machine can produce fuel oil from waste plastic bags. The oil has many applications. It can be widely used as fuel oil in industries such as steel, iron and boiler factories, ceramics, power or chemical industries or hotels, restaurants etc. or used for generators to get electricity. It also can be refined to diesel by pyrolysis oil distillation plant, which can be used in the low speed engine, such as digging machine, road roller, loading machine etc. or sold directly at a higher price.
The Plastic bag to fuel oil machine also has two other end- products, carbon black and a little combustible gas. The carbon black can be used for construction bricks with clay; attach heavy metal, improve the quality of soil; also can be made carbon black bars by using the carbon black processing plant as fuel. The combustible gas can be recycled to heat the reactor as fuel, which will save energy for the whole working process. For our Plastic bag to fuel oil machine, it has passed CE, ISO, SGS certifications, so the quality can be guaranteed. As a leader in the field of plastic recycling, we have first-class pre-sale and after-sale service for you. Please contact us if you are interested in the plastic bag recycling machinery.
Pyrolysis is a thermochemical decomposition of organic material at temperatures between 400 ° C and 900 ° C without the presence of oxygen or other reagents . The pyrolytic breakdown of wood produces a large number of chemical substances . Some of these chemicals can be used as substitutes for conventional fuels . The distribution of the products varies with the chemical composition of the biomass and the operating conditions.
Pyrolysis Plant include 45-52% tire oil, 35% carbon black; 12-15% steel wire; 5-8%. Tire oil is also called fuel oil, can be directly sold (they are also used for processing or used for boiler combustion, bath center, restaurants, burning fuels such as floor brick) or deep processing into organic solvent with refining equipment and automotive fuel, etc.
This small tyre doubling machine is ideal for any workshop or used tire dealer, used to double or undouble (unpack tires). It is powered by compressed air only so there is no risk of electrocution.
We recommend this doubling machine for small workshops wishing to save space for storing or transport their scrap or part worn tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
For some tyre pyrolysis factories, they want to fill as many tires as possible inside the reactor for pyrolysis to oil. But as we all know that tires contain steel wire which is difficult to press. This time you will need to use a tire cutter to cut tyres into small pieces. But after cutting, the steel wire inside tires will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tire packing machine, you can use it to make several complete tires together, then put them into the reactor. It can not only save the plave, the steel wire inside tires also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
This small tyre doubling / unpacking machine is ideal for any workshop or used tyre dealer, used to double or undouble (unpack tyres). It is powered by compressed air only so there is no risk of electrocution. We recommend this machine for the tyre dealers wishing to save space for storing or transport their scrap or used tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
Compared to other tTre processing machine, like tire cutting machine, this small tyre doubling / unpacking machine has several main advantages as below:
1. For some tyre dealers, they want to keep complete tyres for further use. So they don't want to cut tires for better storing and transport, then they can use the tyre doubling & unpacking machine to make several tyres nested together firstly. After transport, they can unpack the tyres to normal for further use.
2. For some tyre pyrolysis factories, they want to fill as many tyres as possible inside the reactor for pyrolysis to oil. But as we all know that tyres contain steel wire which is difficult to press. This time you will need to use a tyre cutter to cut tyres into small pieces. But after cutting, the steel wire inside tyres will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tyre doubling machine, you can use it to make several complete tyres together, then put them into the reactor. It can not only save the plave, the steel wire inside tyres also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
3. This tyre doubling / unpacking machine doesn't need electricity to work. It powered by compressed air. which can save so much energy.
4. Tyre doubling / unpacking machine is easier to operate and more efficiently. It can be operated by only one worker, which can make 3 tires nested together within 1 minutes.
So in conclusion, the tyre doubling / unpacking machine can not only save the storage and transport cost, but also save the energy, the labour and the time.
This small automatic packing machine is ideal for any workshop or used tyre dealer, used to double or undouble (unpack tyres).It is powered by compressed air only so there is no risk of electrocution. We recommend this machine for the tyre dealers wishing to save space for storing or transport their scrap or used tyres. Due to its small dimensions and weight it is ideal for moving from one place to the other.
â?¦ Compared to other tire processing machine, like tire cutting machine, this small antomatic packing machine has several main advantages as below:
1. For some tyre dealers, they want to keep complete tyres for further use. So they don't want to cut tires for better storing and transport, then they can use the automatic packing machine to make several tyres nested together firstly. After transport, they can unpack the tyres to normal for further use.
2. For some tyre pyrolysis factories, they want to fill as many tyres as possible inside the reactor for pyrolysis to oil. But as we all know that tyres contain steel wire which is difficult to press. This time you will need to use a tyre cutter to cut tyres into small pieces. But after cutting, the steel wire inside tyres will become small pieces mix with carbon black after pyrolysis process, which is difficult to separate. For tyre doubling machine, you can use it to make several complete tyres together, then put them into the reactor. It can not only save the plave, the steel wire inside tyres also can keep complete. After pyrolysis, the big steel wire can tangling together, which is easy to pull out by a hook.
3. This automatic packing machine doesn't need electricity to work. It powered by compressed air. which can save so much energy.
4. Automatic packing machine is easier to operate and more efficiently. It can be operated by only one worker, which can make 3 tires nested together within 1 minutes.
So in conclusion, the automatic packing machine ne can not only save the storage and transport cost, but also save the energy, the labour and the time.
Waste tyre recycling the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution
Firstly, our Waste tyre recycling fuel oil pyrolysis plant for sale is equipped with safety device (alarm for over temperature and pressure, auto pressure releasing system, extra gas recycling system, fire fighting devices), which can avoid danger in the production process and guarantee safety. www(dot)wastetireoil(dot)com
Secondly, there is also a little combustible gas produced in the process. The gas can be recycled to heat the reactor as fuel, which will save energy for the whole working process.
Thirdly, in the dedusting system, three steps (water washing, ceramic ring adsorption, water spray) are used to dedust the hot smoke from reactor, and more than 95% of the dust would be removed. The released gas is pollution-free and can be discharged in the air directly.
Fourthly, the structure of reactor for the tire pyrolysis process is 360-degree rotating. This special design makes the bottom of reactor heat evenly, which lengthens the service life of reactor as well as improve the pyrolysis speed. Waste tyre recycling fuel oil pyrolysis plant final product application Fuel oi1.
As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc.
2. Final diesel come out from our distillation plant and deodorant & decolorant can be used in diesel generator.
3. Used in diesel powered cars, such as vans, truck, tractor, etc. 4. Use as heating oil, industrial and home.
Carbon black :
1. Make it to briquette for fuel.
2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh.
Steel wire:Sell to iron and steel factory (you can take out steel wire from tyre before pyrolysis
The waste tire recycling machine adopts the new green pyrolysis technology. Through the use of the waste tire recycling machine, waste tyres can be effectively converted to fuel oil, carbon black and steel wire.
Firstly, compared with the general condensers, our tubular condenser has the features of larger cooling area and better cooling effect, which can further ensure and improve the oil yield efficiency.
Secondly, we can provide you with special catalyst, which can not only improve the flavor and color of the oil, but also accelerate the reaction speed. Thus, it can increase the average oil output by 5%. www(dot)wastetireoil(dot)com
1. Safety. We have some safe devices such as the pressure gauge, alarming ring, safety valve. at the same time we have the anti-back fire device which can avoid the fire back into the reactor.ã??2. Environment protecting. If you come to visit our company to see the running plant, you cannot even see the vapor. as we have the dust removal device and dust removal pool.
3. Energy saving. Our anti-back fire device can collect the exhaust gases which can be fuels after the oil is out so is very convenient and you can save the energy .at the same time, we have the catalyst chamber which can reduce the temperature of the catalytic prolysis of the tires and plastics. so you can save lot's of energy. except this ,we have vacuum device which let the reactor be negative pressure. So you can image. 4. High degree of automatic. We have many automatically devices such as: auto-feeder, carbon black elevator, oil pumping automatic, reducing pressure automatic.
For some tire dealers, they want to keep complete tires for further use. So they don't want to cut tires for better storing and transport, then they can use the tire unpacking machine to make several tires nested together firstly. After transport, they can unpack the tires to normal for further use. This tire unpacking machine doesn't need electricity to work. It powered by compressed air. which can save so much energy.
This small tire unpacking machine is ideal for any workshop or used tire dealer, used to double or undouble (unpack tyres). It is powered by compressed air only so there is no risk of electrocution. We recommend this machine for the tire dealers wishing to save space for storing or transport their scrap or used tires. Due to its small dimensions and weight it is ideal for moving from one place to the other.
The development of the society provides a good environment for the car industry, and the tyre industry also benefits a lot. Usually the raw material of the tyre is natural rubber, which has a long service life and a strong wear resistance. At the same time, it is also a problem to deal with the waste tyre. The number of the waste tyre keeps increasing, but there is no practical method to handle this problem. Burning the waste tyre will produce toxic gas and smog, which are harmful to the human being and the environment. Just leave the waste tyre in a empty land is also dangerous. They will cause fire easily, in addition, we all know that the land resources is precious, and the increasing waste tyres will cause the waste of land if we still use this method.
www(dot)wastetireoil(dot)com
The waste tyre recycling pyrolysis plant is a new invention to solve this problem. It is a green waste treatment plant, because it can recycle the waste tyre to energy without polluting the environment. Following is the processing process.
www(dot)wastetireoil(dot)com
1. The waste tyre is cut into the small piece, then put those into reactor by full-automatic feeding machine(for the continuous machine). The reactor is supposed to be left 1/3 space for rotating more smoothly. Then make sure the door of feeding machine is closed.
www(dot)wastetireoil(dot)com
2. The reactor will be gently heated by burning the fuel material (coal, wood, natural gas, LPG or tire oil generated from last batch). The oil gas will be released when the temperature reached 100â?? (250-280â??is the top output rate interval). Heavy oil gas separated by manifold is supposed to be liquefied and drop down into the heavy oil tank. The lighter gas will rise up to the oil condensers, be liquefied in to oil and stored in the oil tank. The incondensable gas though desulphurization and dedust by hydroseal will be led to the furnace for recycling.
3. After all the above work has been done, the reactor should be cool down. Carbon black will be discharged automatically. There possibly will be a little exhaust gas left, please must expel it after reaching emission standard.
www(dot)wastetireoil(dot)com
4. Before starting next batch, make sure all the work has been done.
There is no pollution in the whole working process, and the quality of the end product is also high, so if you want to make an investment or you need to handle the huge number of waste tyre, our tyre recycling pyrolysis plant is your best choice, and Henan Doing group has been this field for many years with mature technology and professional team.
Waste tyre recycling plant
Using the ttyre recycling plant to deal with the waste tyres is a environmental- friendly way, in addition, the users also can make profits from the plant.
When you decide to buy the waste tyre recycling plant ,you need to have a look at the certification of the company to tell that whether the company is certificated to manufacture pyrolysis plant such as plastic pyrolysis plant,waste tyre pyrolysis plant,and so on.we henan doing mechanical equipment co,ltd has ISO,SGS certification to manufacture the pyrolysis plant.All our products have passed ISO.
However, when you are planning to buy a set of waste tyre recycling plant, you must take the cost into consideration. The most important factors that influence the cost are the models and pyrolysis systems. Here are the differences between the batch plant the continuous plant.
Firstly, the continuous pyrolysis plant needs pre-treatment devices. Before putting tyres into its reactor, it needs a tire shredder to cut the tires into small pieces (30-50mm). While the batch plant doesnâ??t need pre-treatment devices and the tyres can be put into the reactor directly.
Secondly, for the continuous pyrolysis plant, the tyres can be transported to the reactor by an auto feeder. Besides, its discharging of carbon black and steel wire are both automatic. While for the batch pyrolysis plant, the feeding process and the discharging of steel wire are both manual.
Thirdly, the continuous pyrolysis plant can work 3-4 shifts per day, and its reactor just needs 1 hour to cool down before starting another batch. While the batch pyrolysis plant works 1 shift per day and its reactor needs 3-4 hours to cool down before starting another batch.
Did you know that used motor oil never wears out? it just gets dirty and can be recycled, cleaned, and used again. Recycling used motor oil conserves a natural resource (oil) and is good for the environment too!
Recycled dirty motor oil to diesel plant aims at refining various waste oil into diesel oil which can be directly used in engines and generators.
The recycled dirty motor oil to diesel plant is suitable to regenerate waste oil including used motor oil, waste fuel oil, crude oil, waste washing oil and other seriously polluted lubrication oil. Through distillation process, these kinds of oil can be converted into qualified diesel oil, which is cleaner and has higher value in the market. The diesel oil can be directly used in low speed engines and generators. Thus, the plant can not only improve the environment but also relieve energy crisis.
Speaking of recycled dirty motor oil to diesel plant, the most important thing we must pay attention to is the oil yield. Our recycled dirty motor oil to diesel plant can make the oil yield reach as high as 85%-90%. But there are still many other factors influencing the oil yield. Firstly, different kinds of raw materials have different oil yield. Secondly, the water content will also influence the oil yield. For example, the raw material ( like used motor oil) recovery is more than 90% when the water percentage is less than 5%. What’s more, different operation systems have different oil yield as well.
Contact: ms bonnie
Phone: +86-371-5677 1821
+86 15893800169
Skype: bonniezhao2
Email: oilmachine@doinggroup.Com
Www.Wastetireoil.Com
Www.Doinggroup.Com
Vacuum distillation of used oil unit is a kind of machinery which treat various kind of waste oil.Including engine/motor oil/tyre oil /lub oil .Etc.After of vacuum distillation of used oil unit process , the final product is diesel.
Vacuum distillation of used oil unit to tyre oil , plastic oil , crude oil and used engine oil , etc
First, to pump used oil into vacuum distillation of used oil unit
Second, we need to heat crude oil and keep it in a best temperature for best diesel quality. Fuel oil will be converted to diesel oil gas when get heating.
Then our cooling system will cool diesel oil gas into diesel.
Next pump diesel into odor and color removal system for remove which will purify further diesel with special catalyst.
Finally, you can get 85% diesel from our vacuum distillation of crude oil plant
Contact: ms bonnie
Waste plastic to oil machine cost can pyrolysis down of waste plastic to energy. Plastic pyrolysis to oil machine is an industry conducted pyrolysis . In the Scrap plastic pyrolysis to oil machine , the long- chain polymers break down into smaller chains of hydrocarbon gases and pyrolysis oils. Heat required for the catalytic reaction .www(dot)wastetireoil(dot)com
Every year a large amount of plastic waste is discarded in the Earth. These plastic to with stand the natural process of decomposition of all. According to statistical analysis , Waste plastic generated more than 250 million tons each year. A lot of these plastic garbage is used to fill the land , which in turn may result in a waste land to create a major threat to the environment in the future. People use and dump waste plastics almost every day.
Waste plastic to oil Solution: Waste plastic to oil machine cost www(dot)wastetireoil(dot)com
Usage: Waste plastic Recycling to Fuel Oil
Input: Different plastic type, (PP,PE,PS,ABS) etc.
Output: 20%-95% fuel oil, 30%-35% carbon black , 5%-8% gas.
Heating material: coal/wood/fuel oil/natural gas
Machine cover area: usually 400 square meters.
Reactor material: Q245R Boiler plate.
When choosing a tyre recycling plant, the tyre recycling plant cost is a very important factor you should take into consideration. Actually, there are many factors affecting the cost of tyre recycling plant.
First of all, the quality of the plant. Buying a plant that is durable will save a lot of maintenance cost for you. The plant manufactured by Beston has passed CE, ISO, SGS certificates and has high quality guarantee.
Secondly, the economic values of the final products. When choosing a machine, you should consider whether the final products can make money for you. We can provide tyre pyrolysis equipment and tire recycling into powder equipment, you can choose to suit their own solution.www(dot)wastetireoil(dot)com
Thirdly, the after sale service is also an important factor affecting the machine cost. We will provide installation service for free. And our engineers are available to serve at any time.www(dot)wastetireoil(dot)comwww(dot)wastetireoil(dot)com
In addition to the three main factors mentioned above, there are still many other factors affecting the cost. If you need more cost analysis, please feel free to contact us.
Used tyre is a kind of non-fusible material which not only take up farmland, but also endanger environment. Normal ways to process solid waste like landfill, burn etc are not suitable for used tires. How to solve used tires pollution?
Cost of used tyre recycling plant is more and more likely received by people all over the world. It not only solve used tire disposal problem environmental friendly, but also can bring you rather considerable profit.
Cost of used tyre recycling plant can process used tyres into 45%-52% fuel oil, 30% carbon black and 15% steel wire.
We have 9 years’ experience in this area. Since 2011, China started to export used tyre recycling plant to foreign countries. Till now, we’ve exported our used tyre recycling plant to more than 30 countries, such as Italy, Romania, Bangladesh, Malaysia, Mexico, Albania, Ecuador, Macedonia, Egypt, Panama, Guatemala etc.
1. Put raw material into reactor by full-automatic feeding machine. The reactor is supposed to be left 1/3 space for rotating more smoothly. Then make sure the door of feeding machine is closed.
2.Reactor will be gently heated by burning the fuel material (coal, wood, natural gas, LPG or tire oil generated from last batch). The oil gas will be released when the temperature reached 100? (250-280? is the top output rate interval). Heavy oil gas separated by manifold is supposed to be liquefied and drop down into the heavy oil tank. The lighter gas will rise up to the oil condensers, be liquefied into oil and stored in the oil tank. The incondensable gas through dusulphuration and dedusting by hydroseal will be led to the furnace for recycling.
3. After all the above work has been done, cool down the reactor. Then the carbon black will be discharged automatically.
4.There possibly will be a little exhaust gas left, and you should not expel it until it has reached the emission standard.
5. Before starting next batch, make sure all the work has been done.
The pyrolysis of plastics waste is a new green technology to recycle plastic and we Doing group have applied this technology in our plant. By using the plastic to fuel oil pyrolysis plant, finally you can get oil from the plastic waste, and you can also get the carbon black and combustible gas, all of which have a wide range of applications.
www(dot)wastetireoil(dot)com
According to the demands of different customers, we provide three types of plastic to fuel oil pyrolysis plants for customers, including batch operating plant, semi-automatic operating plant and auto continuously operating plant. Each set of plant is www(dot)wastetireoil(dot)commanufactured with advanced technologies and has the features of high efficiency and low cost. The following are some technologies applied in the plant:
1. The first in the world to have created the new heating structure that combines the advantages of burning the reactor directly and heating the main reactor by hot air.
2. The technology of avoiding the reactor of being burnt through by reforming the furnace, which will lengthen the life span of the main reactor for 5 to 8 years and save quite amount of money for customers to maintain and update the plant.
3. The technology of improving the oil yield by another 5% compared with the traditional plant.
4. The technology of guaranteeing 100% safety in the whole working process.
5. The technology of ensuring the released gas reach the European pollution control standards.
z
Pyrolysis plant is renewable energy generation system. Pyrolysis plants are designed to generate www(dot)china-doing(dot)com
quality fuel from polymer waste. Pyrolysis system or pyrolysis plant is an industry for conversion www(dot)china-doing(dot)com
of waste and tyre into usable products like:www(dot)china-doing(dot)com
1. Pyrolysis oil(Fuel oil)
2. Carbon black
3. Steel wire
4. Hydrocarbon gas
Benefits of pyrolysis plant
1. Recover energy and value from waste in form of fuel, steel wire and charcoal.
2. Reduce tyre land pollution.www(dot)china-doing(dot)com
3. Eco-friendly recycling of tyre.
4. Commercially viable process.
5. Product is used as substitute to LDO/furnace oil.
6. Perfect solution for polymer waste management.
7 Raw material available.
With the rapid development of the world plastic industry, more and more plastic materials are used widely than before. As the increasing quantity application of plastic, it brings people convenience as well as serious pollution problems. At present, the waste plastics mainly are solved by landfill, burning and recycling. However, both of landfill and burning cause the secondary pollution, and the scope waste plastic recycling is very limited. For example, the waste plastics produced by household garbage and paper-making factory, which can not be recycled. With the increasing price of International crude oil, the waste plastic pyrolysis plant project report is closely watched by different countries in the world.
www(dot)doinggroup(dot)com
This plastic pyrolysis plant applies pyrolysis technology which can convert plastics into fuel oil and carbon black. All of them have a wide range of applications and can create high benefits for you. The fuel oil can be widely used in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. or used for generators to get electricity. Carbon black can be used for making construction bricks with clay, or used as fuelã??www(dot)china-doing(dot)com
Every year, millions of old, used tires from cars and trucks pile up as waste. Researchers have discovered a way to create diesel fuel from used tires. They have designed highly technical, specialized equipment that heats the rubber from the tires to a very high temperature. The gas created by this heating is funneled through a condenser which separates the gas from the oil that is also created. The oil that filters out is high-quality diesel fuel which can power our cars. This system can make a tremendous impact on the environment and lessen our reliance on petroleum.www(dot)wastetireoil(dot)com
After decades of years of research and operation, now, we have developed two designs of tire to diesel fuel recycling pyrolysis plant. The first design is batch tire to diesel fuel recycling pyrolysis plant. The second design is more advanced ---fully continuous tire to diesel fuel recycling pyrolysis plant. www(dot)wastetireoil(dot)com
Firstly, the batch design of tire to diesel fuel recycling pyrolysis plant can finish one batch of process per day.www(dot)wastetireoil(dot)com
Convert waste plastic into fuel oil of Doing oil pyrolysis machine which can turn waste plastic into fuel?www(dot)china-doing(dot)com
How to convert waste plastic into fuel oil ? Doing waste plastic into fuel oil pyrolysis machine working process as follows:www(dot)china-doing(dot)com
1. Put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tyre will be transferred to oil gas.www(dot)china-doing(dot)com
2. The liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can not be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.
3. Smoke produced by processing the plastics can achieve national emission standard through dual desulfurization and dusting removal device.
4. After you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.www(dot)china-doing(dot)com
Last, when the temperature falls to 100 degree Celsius, After all these steps, you can start another batch.
Continuous waste plastic pyrolysis plant is an industry that converts waste plastic & tires & rubber and other waste materials into Pyrolysis Oil, Carbon Black & Hydrocarbon Gas.
www(dot)china-doing(dot)com
Continuous waste plastic pyrolysis plant can reduce the volumes of the waste products and help human protect the environment. And the plastic has been one of the most common materials since the beginning of 20th century because of its durability, low cost and light weight. Plastic makes up around 30% of all rubbish collected. This includes plastic bottles, containers, plastic wrap, packaging, electronic goods, car body parts, etc. Because the plastic is slow to degrade, this kind of waste becomes a problem for many people. As we all know, plastics are not only pollute the lands, waterways and oceans, but also affect the marine animals and humans, leading to the metabolic disturbance. So, solving the plastic pollution has become the imminent thing and is the primary task for people.www(dot)china-doing(dot)com
