Description
The Trusted Processor Interface Adaptor T812X provides easy access to the communications ports of the Trusted TMR Processor in the Trusted Controller Chassis for Peer to Peer communications, DCS and other links, networked PCs etc. The Adaptor also supports fault/fail and diagnostics connections to the Processor, and connection facilities for IRIG B time Synchronization facilities, as well as enabling the user of Modbus Master facilities on the T8151 Communication Interface Card.
The Adaptor comprises a printed circuit board (PCB) on which the communications ports are mounted. The PCB also supports two 48- way DIN41612 E-type connectors which enables the Adaptor to be plugged into the Trusted TMR Processor Module input/output (I/O) connectors (Active and Standby) at the rear of the Trusted Controller Chassis. The communications ports available from the Adaptor are RS485 (Port 1) and RS422/485 (Ports 2 and 3). The Ports are accessed via Phoenix contact 2.5mm pitch connectors.
Fault/fail, diagnostic and PSU shutdown monitor, and IRIG B time Synchronization signals are also available via Phoenix connectors.
A complete set of connectors mentioned above are allocated to both the Active and Standby processors.
Termination resistors for RS422/485 communications are selectable via links. These are mounted on the PCB and are the only configurable items which require setting up before using the Adaptor.
When the Adaptor is plugged into the I/O connector on the rear of the Trusted Controller Chassis, it is mechanically latched in position. Release buttons are provided to enable the user to unplug the Adaptor as required.
Features
Allows easy access for external systems to communicate with a Trusted System
Easy installation (connects directly onto the I/O connector at the rear of the processor)
Two RS422/485 connections
One RS485 connection
Fault/fail connections for Active and Standby Processors
Processor diagnostics connection
PSU shutdown monitor connections
Connection facilities for IRIG B122 and IRIG B002 time Synchronisation signals
Modbus Master enabling of the T8151B Communication Interface Card
Description
The Trusted Expander Interface Adaptor Unit T8312 comprises four 12-pin ODU connectors (dependent on type of unit), a printed circuit board (pcb), a 96-way C type connector which plugs into a double 96-way connector assembly designed to be connected to the Trusted Expander Interface modules resident in the Controller Chassis. The Unit is contained within a metal enclosure and is designed to be clipped onto the Controller Chassis rear connectors. A release button is provided to enable the Unit to be disconnected.
Features
Allows easy inter-connection of Controller and Expander Chassis.
Unit is fully shielded for EMC.
Version available for smaller Trusted Systems-up to four Expander Chassis.
Locking connectors for increased reliability.
General Information
Product ID: 3BSE038415R1
Medium Description: AO810V2 Analog Output Module, 8 channels, 0(4)...20mA
Technical Information: Supersedes 3BSE008522R1/3BSE038415Z1
Product Type: I/O Module
Country of Origin: Estonia /India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.19 kg
Description
The Trusted 40 Channel Analogue Output or Digital Output FTA is designed to act as the main interface between the Trusted TMR 24V dc Digital Output Module T8451 or Trusted TMR Analogue Output Module T8480 and Trusted the field device. The signal from the output modules are 24V dc and 0-20mA respectively.
Features
40 output channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Screw clamp terminals on both field and power.
Simple installation and connection.
24V dc operation.
SmartSlot connection for one to many hot replacement of output modules.
Field power supply arranged in five groups of eight channels, with OV isolation between groups.
On-board LED indication field power supply integrity.
Field terminal wire size allowance 12 to 28 AWG
Description
The Trusted TMR Analogue Output module interfaces to 40 field devices. Triplicated diagnostic tests are performed throughout the module including measurements for current, and voltage on each portion of the voted output channel. Tests are also performed for stuck on and stuck off failures. Fault tolerance is achieved through a Triple Modular Redundant (TMR) architecture within the module for each of the 40 output channels.
Automatic line-monitoring of the field device is provided. This feature enables the module to detect both open and short circuit failures in field wiring and load devices.
The module provides on-board Sequence of Events (SOE) reporting with a resolution of 1ms. An output change of state triggers an SOE entry. Output states are automatically determined by voltage and current measurements on board the module.
Features
40 Triple Modular Redundant (TMR) output channels per module.
Comprehensive, automatic diagnostics and self-test.
Automatic line monitoring per point to detect open circuit and short circuit field wiring and load faults.
2500V dc optical isolation barrier.
On-board Sequence of Events (SOE) reporting with 1ms resolution. Module can be hot-replaced on-line using dedicated Companion (adjacent) Slot or SmartSlot (one spare slot for many modules) configurations.
Front panel output status LEDs for each point indicate output status and field wiring faults
Front panel module status LEDs indicate module health and operational mode (Active, Standby, Educated)
TUV Certified for non-interfering applicatins
Outputs are powered in isolated groups of eight
General Information
Product ID: 3BSE008516R1
Medium Description: AI810 Analog input Module, 8 channels
Technical Information: Supersedes 3BSE008516Z1
Product Type: I/O Module
Country of Origin: Estonia / India
Customs Tariff Number: 85389091
Length: 150 mm
Height: 150 mm
Width: 75 mm
Weight: 0.19 kg
Description
The Trusted TMR 24V dc digital input module interfaces to 40 field input devices. A wide input voltage range and programmable thresholds allow the module to be used in current source and current sink configurations. Comprehensive diagnostic tests are performed on each input channel, including tests for stuck on and stuck off failures. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 input channels.
When a line-monitoring device is installed at the field switch, the module can detect open and shorted field cables. Line monitoring can be independently configured for each input channel.
The module provides on-board sequence of events (SOE) reporting with a resolution of 1ms. A change of state triggers an SOE entry. States are determined by programmable voltage thresholds that can be configured on a per channel basis. When the field voltage and field return are connected to the auxiliary input channels of the module, thresholds can be specified as a ratio of the current field supply voltage.
Each triplicated section of the module, referred to as a slice, conditions and measures each channel independently. Each slice is optically isolated up to 2500V dc. Each slice sends its data to a safety layer hardware voter that presents the information from all three slices to the Trusted TMR processor. When a fault is detected on a slice of the module, the Trusted TMR processor will flag the error, indicating the need to replace the module. The Trusted TMR processor will continue to use the information provided by the remaining two slices until a replacement module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR input channels per module.
Comprehensive diagnostics and self-test.
Line monitoring on a per channel basis.
2500V dc optically isolation.
On-board 1ms resolution sequence of events reporting.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
Description
The Trusted TMR Analogue Output module interfaces to 40 field devices. Triplicated diagnostic tests are performed throughout the module including measurements for current, and voltage on each portion of the voted output channel. Tests are also performed for stuck on and stuck off failures. Fault tolerance is achieved through a Triple Modular Redundant (TMR) architecture within the module for each of the 40 output channels.
Automatic line-monitoring of the field device is provided. This feature enables the module to detect both open and short circuit failures in field wiring and load devices.
The module provides on-board Sequence of Events (SOE) reporting with a resolution of 1ms. An output change of state triggers an SOE entry. Output states are automatically determined by voltage and current measurements on board the module.
Features
40 Triple Modular Redundant (TMR) output channels per module.
Comprehensive, automatic diagnostics and self-test.
Automatic line monitoring per point to detect open circuit and short circuit field wiring and load faults.
2500V dc optical isolation barrier.
On-board Sequence of Events (SOE) reporting with 1ms resolution. Module can be hot-replaced on-line using dedicated Companion (adjacent) Slot or SmartSlot (one spare slot for many modules) configurations.
Front panel output status LEDs for each point indicate output status and field wiring faults
Front panel module status LEDs indicate module health and operational mode (Active, Standby, Educated)
TUV Certified for non-interfering applicatins
Outputs are powered in isolated groups of eight
General Information
Product ID: 3BSE052604R1
Medium Description: AI815 Analog Input Module, 8 channels with HART
Product Type: I/O Module
Country of Origin: India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.3 kg
General Information
Product ID: 3BSE040662R1
Medium Description: AI830A Analog input Module, 8 channels, RTD
Technical Information: Supersedes 3BSE008518R1
Product Type: I/O Module
Country of Origin: Estonia /India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.3 kg
General Information
Product ID: 3BSE045584R1
Medium Description: AO845A Analog Output Module, Redundant or single, 8 channels, HART
Technical Information: Supersedes 3BSE023676R1
Product Type: I/O Module
Country of Origin: India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.3 kg
Description
The Trusted Field Termination Assembly (FTA) 24V dc Digital Input T8800 is designed to act as the main interface between a field device generating a digital signal and the Trusted TMR 24V dc Digital Input Module T8403.
Features
40 input channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Simple installation and connection.
24V dc operation.
SmartSlot connection for one to many hot replacement of input modules.
Fused field power supply per channel.
On-board LED indication field power supply integrity.
General Information
Product ID: 3BSE023675R1
Medium Description: AI845 Analog Input Module, 8 channels, Redundant or single, HART.
Product Type: I/O Module
Country of Origin: India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.34 kg
Description
The Trusted TMR 24V dc digital output module interfaces to 40 field output devices. Outputs are arranged in five groups of eight outputs. All outputs in a group share a common power source and return. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 output channels.
The module provides on-board sequence of events (SOE) reporting with a resolution of 1ms. The event is the actual sensing of the field device loop current.
Each triplicated section (slice) of the module, receives output data from the Trusted TMR processor and sends its data to an internal safety layer hardware voter. Each slice uses the voted data to control the outputs. Every output channel consists of a six-element voted array. The output switch array provides fault tolerant, uninterrupted control under an output switch failure condition. Output switching and fault diagnostics comply with the demanding requirements of IEC-61508 SIL-3 for First fault - Fault tolerant, and Second fault Fail-safe outputs.
When a module fault is detected, the Trusted TMR processor will flag the unhealthy condition, indicating the need to replace the module. Control continues until a replacement (healthy) module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Each output is user configurable to perform line monitoring of the connected field devices to detect field wiring and load failures. Automatic over-current protection is inherent in every output circuit which eliminates the need for fuses.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR output channels per module.
Five isolated groups of eight outputs each.
Six-element voted output array.
Comprehensive diagnostics and self-test.
Guaranteed, First fault fault tolerant, Second fault fail-safe.
Line monitoring on a per channel basis.
Automatic over-current protection no fuses required.
2500V dc optically isolation.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
On-board 1 ms resolution sequence of events reporting.
Description
The Trusted TMR 24 / 48V dc Digital Output module interfaces to 40 field devices. Triplicated diagnostic tests are performed throughout the module including measurements for current, and voltage on each portion of the voted output channel. Tests are also performed for stuck on and stuck off failures. Fault tolerance is achieved through a Triple Modular Redundant (TMR) architecture within the module for each of the 40 output channels.
Automatic line-monitoring of the field device is provided. This feature enables the module to detect both open and short circuit failures in field wiring and load devices.
The module provides on-board Sequence of Events (SOE) reporting with a resolution of 1ms. An output change of state triggers an SOE entry. Output states are automatically determined by voltage and current measurements on board the module.
Features
40 Triple Modular Redundant (TMR) output channels per module.
Comprehensive, automatic diagnostics and self-test.
Automatic line monitoring per channel to detect open circuit and short circuit field wiring and load faults.
2500V dc optical isolation barrier.
Automatic over-current protection (per channel), no fuses required.
On-board Sequence of Events (SOE) reporting with 1ms resolution.
Module can be hot-replaced on-line using dedicated Companion (adjacent) Slot or SmartSlot (one spare slot for many modules) configurations.
Front panel output status LEDs for each channel indicate output status and field wiring faults.
Front panel module status LEDs indicate module health and operational mode (Active, Standby, Educated)
TUV Certified IEC 61508 SIL 3
Outputs are powered in isolated groups of eight.
Each power group can be of a different voltage
Description
The Trusted TMR analogue input module interfaces to 40 single-ended field input devices. A wide input range and programmable thresholds allow the module to be used in most voltage or current configurations. Comprehensive diagnostic tests are performed on each input channel, including tests for out of range values and stuck at failures. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 input channels.
The module can apply a digital filter to each input channel. Individual channels can be configured for high noise immunity (50Hz or 60Hz rejection), low noise immunity (fast response) or pass-through operation (no filtering).
Each input channel has four configurable state thresholds, which may be assigned to SOE reporting. A change of state triggers an SOE entry. The on-board sequence of events (SOE) reporting has a resolution of 1ms.
Each triplicated section of the module, referred to as a slice, conditions and measures each channel independently. Each slice is optically isolated up to 2500V dc. Each slice sends its data to a safety layer hardware voter that presents the information from all three slices to the Trusted TMR processor. When a fault is detected on a slice of the module, the Trusted TMR processor will flag the error, indicating the need to replace the module. The Trusted TMR processor will continue to use the information provided by the remaining two slices until a replacement module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR input channels per module.
Comprehensive diagnostics and self-test.
2500V dc optically isolation.
Digital signal filtering on a per channel basis.
Four user configurable thresholds per channel.
On-board 1ms resolution sequence of events reporting.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
Description
The Trusted 40 Channel Analogue Input FTA T8830 is designed to act as the main interface between a field device generating an analogue signal and the Trusted TMR Analogue Input Module T8431.
Features
40 input channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Simple installation and connection.
24V dc operation.
SmartSlot connection for one to many hot replacement of input modules.
Fused field power supply per channel.
On-board LED indication field power supply integrity.
General Information
Product ID: 3BSE051306R1
Medium Description: AI835A Analog input Module, 8 channels, thermocouple/mV
Technical Information: Supersedes 3BSE008520R1/3BSE008520Z1/ 3BSE051306Z1
Product Type: I/O Module
Country of Origin: Estonia
Customs Tariff Number: 85389091
Length: 150 mm
Height: 150 mm
Width: 75 mm
Weight: 0.2 kg
General Information
Product ID: 3BSE028925R1
Medium Description: AI843 Analog Input Module, 8 channels, Redundant or Single, thermocouple /mV
Product Type: I/O Module
Country of Origin: Estonia
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.25 kg
General Information
Product ID: 3BSE052605R1
Medium Description: AO815 Analog Output Module, 8 channels with HART
Product Type: I/O Module
Country of Origin: India
Customs Tariff Number: 85389091
Length: 102 mm
Height: 119 mm
Width: 45 mm
Weight: 0.3 kg
General Information
Product ID: 3BSE018164R2
Medium Description: PM864AK02-eA Redundant Processor Unit
Package including:
2 pcs PM864AK01-eA, Processor unit.
1 pcs TK850, CEX-bus expansion cable.
1 pcs TK851, RCU-Link cable.
Product Type: Central Unit
Customs Tariff Number: 85389091
Product Net Length: 135 mm
Product Net Height: 186 mm
Product Net Width: 119 mm
Product Net Weight: 2.9 kg
Description
The TrustedTM Fan Tray 24V dc Rack Mounted comprises four fans mounted vertically at the rear of a 2U high chassis. The chassis containing the fans incorporates a baffle to prevent air drawn by the fans flowing through the module chassis immediately above the fan tray. Air exhausted by the fans into the rear of the system cabinet is drawn upwards and out of the cabinet by roof-mounted fans
The Fan Tray is powered from dual 24V dc supplies arranged such that the fans are supplied in pairs via 250mA anti-surge fuses. The 0V supply is connected via terminal block TB1.
Each fan is capable of moving 69m3/h when operating with a nominal rotor speed of 3100 rpm. Protection against overloading and reverse polarity is provided electonically for each fan.
Features
Simple installation and connection.
Capable of moving 276m3/h.
24V dc operation.
Low noise (32db per fan).
General Information
Product ID: 3BSC610067R1
Medium Description: SD834 Power supply Module, Input 100-240 V AC/DC, 110-300V, Output 24 VDC, 20 A, DIN rail mounted, G2 compliant.
Product Type: Power supply
Country of Origin: China
Customs Tariff Number: 85044082
Length: 127 mm
Height: 124 mm
Width: 82 mm
Weight: 1.35 kg
General Information
Product ID: 3BSC610066R1
Medium Description: SD833 Power supply Module, Input 100-120/200-240 VAC, auto-select input, Output 24VDC, 10A, DIN rail mounted, G2 compliant.
Product Type: Power supply
Country of Origin: China
Customs Tariff Number: 85044082
Length: 117 mm
Height: 124 mm
Width: 60 mm
Weight: 0.8 kg
Description
The Trusted Versatile Field Termination Assembly (VFTA) is designed to act as the main interface between field devices associated with the detection and suppression of fire and gas hazards, and the Trusted TMR Zone Interface Module T8448.
Each channel of the VFTA is configurable to enable a variety of field devices to be connected. These include devices generating both analogue and digital input signals, and output devices requiring a digital signal at up to 40V dc.
The 40 channels are arranged in five power groups each comprising eight identical channels. Each power group is supplied from dual 24V dc feeds which are commoned via diodes on the VFTA. The supply is then fed to each channel within the group.
The supply voltage to the field is fed via a 315mA fuse. The incoming signal (0-20mA) from the field device is fed through a 50mA fuse which effectively limits the input signal. The voltage developed across an input 250R resistor (high precision 0.1%) is used by the input module to detect the field device status.
The cable linking the 40 channels on the input module to the VFTA is terminated at five 10-way connectors. The dual 24V dc power supplies are connected to the VFTA via five 4-way connectors. Forty 3-way connectors are used for the field loops.
The VFTA is designed to be mounted on either of the TS32 or TS35 DIN rails in the horizontal or vertical positions as required.
Features
Forty input channels per VFTA
Industry standard field device connections (3-wire)
Standard DIN rail compatibility
Simple configuration using plug-in fuses
Simple installation and connection
24V dc operation
Fused field power supply per channel
Designed for use with current sinking and sourcing field devices
General Information
Product ID: 3BSC610068R1
Medium Description: SS832 Power Voting Unit, Input 24 VDC, Dual 24 V to single 24 V, 2 x 10 A, DIN rail mounted, G2 compliant.
Product Type: Power supply
Country of Origin: China/ Czech Republic
Customs Tariff Number: 85389091
Length: 117 mm
Height: 125 mm
Width: 32 mm
Weight: 0.45 kg
General Information
Product ID: 3BSE038226R1
Medium Description: SS823 Power Voting Unit
Product Type: Power supply
Country of Origin: Sweden
Customs Tariff Number: 85389091
Length: 145 mm
Height: 132 mm
Width: 116 mm
Weight: 0.87 kg
ABB has over 20 years of experience in designing, installing and maintaining fault tolerant systems, both onshore and offshore.
P8100, P8110B, P8110C, P8120, P8121, P8122, P8123, P8151B, P8151C, P8153, P8160, P8161, P8162, P8191, P8192, P8193, P8194, P8200, P8202, P8220, P8222, P8225, P8230, P8231, P8232, P8233, P8234, P8235, P8240, P8243, P8247, P8270, P8271, P8272, P8273, P8290, P8292, P8293, P8294, P8300, P8310, P8311, P8312-4, P8312-7, P8314, P8380, P8402, P8403, P8423, P8424, P8431, P8432, P8433, P8448, P8449, P8451, P8461, P8471, P8472, P8480, P8800, P8801, P8802, P8805, P8821, P8824, P8830, P8831, P8832, P8833, P8835, P8840, P8842, P8846, P8850, P8870, P8871, P8891, P8901, P8902, P8903, TC-001-02, TC-002-02, TC-003-02, TC-004-02, TC-006-02, TC-011-02, TC-201-02, TC-203-02, TC-205-02, TC-207-02, TC-209-02, TC-210-02, TC-211-02, TC-212-02, TC-221-02, TC-301-02, TC-302-02, TC-303-02, TC-304-01, TC-305-01, TC-306-02, TC-308-02, TC-311-02, TC-312-02, TC-313-02, TC-314-02, TC-320-01, TC-323-01, TC-501-02, TC-503-02, TC-504-02, TC-505-02, TC-507-02, TC-509-02, TC-510-02, TC-511-02, TC-512-02, TC-517-02, TC-601-02, TC-701-02, TC-801-02
P8100C, P8120C, P8121C, P8122C, P8123C, P8153C, P8231C, P8232C, P8240C, P8293C, P8300C, P8310C, P8311C, P8314C, P8403C, P8424C, P8431C, P8432C, P8433C, P8448C, P8449C, P8451C, P8461C, P8471C, P8480C, P8800C, P8801C, P8830C, P8831C, P8833C, P8842C, P8846C, P8850C, P8891C, P8312-4C, P8312-7C, P8131, P8173, P8444, P 8834, P8841, P8295, P8296, P8297, P8201, P8226, P8086, TC322-02, TC324-02, TC325-02, TC-310-02, TC-321-01, TC-322-02, TC-324-02, TC-325-02, TC-521-02
The S800 I/O provides easy installation of the I/O modules and process cabling. It is highly modularized and flexible so that I/O modules can be combined to suit many applications. The S800 I/O can be mounted in many configurations to fit most requirements.
3BSE008516R1 AI810 Analog input 1x8 ch.
3BSE052604R1 AI815 Analog Input module
3BSE008544R1 AI820 Analog input module
3BSE036456R1 AI825 Analog Input module
3BSE040662R1 AI830A Analog input module
3BSE051306R1 AI835A Analog input module
3BSE028925R1 AI843 Analog Input module
3BSE023675R1 AI845 Analog Input module
3BSC690071R1 AI890 Analog Input module
3BSC690141R1 AI893 Analog Input module
3BSC690086R1 AI895 Analog Input module
3BSE038415R1 AO810V 2 Analog Output module
3BSE052605R1 AO815 Analog Output module
3BSE008546R1 AO820 Analog Output module
3BSE045584R1 AO845A Analog Output module
3BSC690072R1 AO890 Analog Output module
3BSC690087R1 AO895 Analog Output module
3BSE022366R1 CI801 PROFIBUS Communication interface
3BSE041882R1 CI840A Q Q 109146768 Interface
3BSE039293R1 AI880A High Integrity Analog Input module
3BSE028586R1 DI880 High Integrity Digital Input module
3BSE028926R1 DP840 infoatoilwaterfilterdotcom module
3BSE028602R1 DO880 High Integrity Digital Output module
3BSE008508R1 DI810 Digital Input module
3BSE008552R1 DI811 Digital input module
3BUR001454R1 DI814 Digital Input module
3BSE069052R1 DI818 Digital Input module
3BSE008512R1 DI820 Digital Input module
3BSE008550R1 DI821 Digital Input module
3BSE036373R1 DI825 Digital Input module
3BSE069054R1 DI828 Digital Input module
3BSE013210R1 DI830 Digital Input module
3BSE013212R1 DI831 Digital Input module
3BSE020836R1 DI840 Digital Input module
3BSC690073R1 DI890 Digital Input module
3BSE008510R1 DO810 Digital Output module
3BUR001455R1 DO814 Digital Output module
3BSE013258R1 DO815 Digital Output module
3BSE069053R1 DO818 Digital Output module
3BSE008514R1 DO820 Digital Output module
3BSE013250R1 DO821 Digital Output module
3BSE069055R1 DO828 Digital Output module
3BSE020838R1 DO840 Digital Output module
3BSC690074R1 DO890 Digital Output module
3BSE013228R1 DP820 Pulse Counter module
3BSE020512R1 AI801 Analog input module
3BSE020514R1 AO801 Analog output module
3BSE020508R1 DI801 Digital Input module
3BSE022360R1 DI802 Digital Input module
3BSE022362R1 DI803 Digital Input module
3BSE020510R1 DO801 Digital Output module
3BSE022364R1 DO802 Digital Output module
General Information
Product ID: 3BSE081638R1
Medium Description: PM867K02 Redundant Processor Unit HI. Package including:
- 2 pcs PM867, CPU
- 2 pcs TP830, Baseplate
- 2 pcs TB807, ModuleBus terminator
- TK850, CEX-bus extension cable
- TK851, RCU-Link cable
- 2 pcs Battery for memory backup (4943013-6)
- No license included
Product Type: Central Unit
Country of Origin: Sweden
Customs Tariff Number: 85389091
Product Net Length: 135 mm
Product Net Height: 186 mm
Product Net Width: 119 mm
Product Net Weight: 2.7 kg
Description
The Trusted Expander Interface Adaptor Unit T8312 comprises seven 12-pin ODU connectors (dependent on type of unit), a printed circuit board (pcb), a 96-way C type connector which plugs into a double 96-way connector assembly designed to be connected to the Trusted Expander Interface modules resident in the Controller Chassis. The Unit is contained within a metal enclosure and is designed to be clipped onto the Controller Chassis rear connectors. A release button is provided to enable the Unit to be disconnected.
Features
Allows easy inter-connection of Controller and Expander Chassis.
Unit is fully shielded for EMC.
Version available for smaller Trusted Systems-up to four Expander Chassis.
Locking connectors for increased reliability.
AC800F, the hybrid process control system, combines the best of both worlds, DCS and PLC. It offers PLC size and price with functionality of a DCS. Freelance is proven in more than 14,000 applications in all industries.
3BDH000022R1 EI813F Ethernet module
3BDH000030R1 FI810F CAN module
3BDH000031R1 FI820F Serial module
3BDH000032R1 FI830F Profibus-DPV1 module
3BDH000033R1 FI840F Foundation Fieldbus module
3BDH000530R1 PM803F CPU Module
3BDH000013R1 SA811F Power supply module
3BDH000014R1 SD812F Power supply
3BDM000160R1 TB870F Terminal block
3BDM000103R1 TK811F CAN cable
3BDM000150R1 TK821F serial Cable
3BDM000100R1 TK831F CAN Cable
3BDM000202R1 TK890F Diagnostics cable
3BDM000201R1 TK891F Diagnostics cable
3BDH001001R0001 PM901F Central Processing Unit
3BDH001000R0001 PM902F Central Processing Unit
3BDH001005R0001 CI910F CAN Module
3BDH001010R0002 CI930F Communication Interface
System 800xA DCS boasts 10,000 installed systems in over 100 countries, monitoring and controlling over 50 million tags and helping ABB be the no.1 global DCS supplier for over a decade.
BC810K02, BC820K02, CI853K01, CI854AK01, CI855K01, CI856K01, CI857K01, CI858K01, CI860K01, SS832, CI867K01, CI868K01, CI869K01, CI871K01, CI873K01, PM851AK01, PM856AK01, PM858K01, PM858K02, PM860AK01, PM862K01, PM862K02, PM866AK01, PM866AK02, PM867K01, PM867K02, PM891K01, PM891K02, SB822, SM811K01, SM812K01, TB850, TB851, TB852, TB853, TC562, TK850V007, TK851V010, TK853V020, TK855, TK856, TK857V003, LD800HSE, RLM01, FS801K01, SS823, TB807, TB820V2, TB840A, TB842, TB845, TB846, TK212, TK527V030, TK801V003, TK801V006, TK801V012, TK811V015, TK811V050, TK811V150, TK812V015, TK812V050, TK812V150, TU805K01, TU807, TU810V1, TU811V1, TU812V1, TU813, TU814V1, TU818, TU819, TU830V1, TU831V1, TU833, TU834, TU835V1, TU836V1, TU837V1, TU838, TU839, TU840, TU841, TU842, TU843, TU844, TU845, TU846, TU847, TU848, TU849, TU850, TU851, TU852, TU854, SD831, SD832, SD833, SD834, SS832
The Harmony Rack Multifunction Processor is a multiple loop, analog, sequential, batch and advanced control processor.
PHARPS32000000, PHARPS32010000, PHARPS32200000, PHARPSCH100000, PHARPSFAN03000, PHARPSPEP21012, PHARPSPEP21013, PHCBRC30000000, PHCBRC40000000, PHCBRC41000000, PHCBRCPBA20000, PMKHRMBRC3000A, S-CB-SET-C-000010000, S-CB-SET-C-100010000, S-CB-SET-S-100010000, S-CB-SET-S-200010000, SCSI AHA-2940UW, SCSI Cable, SPASI23, SPASO11, SPBLK01, SPBRC300, SPBRC400, SPBRC410, SPCIS22, SPCMM11, SPDSI13, SPDSI14, SPDSI22, SPDSM04, SPDSO14, SPFCS01, SPFEC12, SPHSS03, SPICI03-SCIL, SPICT13A, SPIET800, SPIIL02-L, SPIIT13, SPNIS21, SPNPM22, SPQRS22, SPSED01, SPSEM11, SPSET01, SPSOE01, SPTAS01, SPTPS02, SSBIET800000, SSBIET800A0000, TAS01, TPS02, TPSTU02
Trustedâ?¢, the ICS Triplex flagship product, has the smallest footprint in the industry. It uses RunSafeâ?¢ 3-3-2-0 fault-tolerant control to virtually eliminate spurious trips and offers the highest availability and lowest cost of ownership of any SIL3 rated safety system available.
T8100,T8110B,T8110C,T8120,T8121,T8122,T8123,T8151B,T8151C,T8153,T8160,T8161,T8162,T8191,T8192,T8193,T8194,T8200,T8202,T8220,T8222,T8225,T8230,T8231,T8232,T8233,T8234,T8235,T8240,T8243,T8247,T8270,T8271,T8272,T8273,T8290,T8292,T8293,T8294,T8300,T8310,T8311,T8312-4,T8312-7,T8314,T8380,T8402,T8403,T8423,T8424,T8431,T8432,T8433,T8448,T8449,T8451,T8461,T8471,T8472,T8480,T8800,T8801,T8802,T8805,T8821,T8824,T8830,T8831,T8832,T8833,T8835,T8840,T8842,T8846,T8850,T8870,T8871,T8891,T8901,T8902,T8903,TC-001-02,TC-002-02,TC-003-02,TC-004-02,TC-006-02,TC-011-02,TC-201-02,TC-203-02,TC-205-02,TC-207-02,TC-209-02,TC-210-02,TC-211-02,TC-212-02,TC-221-02,TC-301-02,TC-302-02,TC-303-02,TC-304-01,TC-305-01,TC-306-02,TC-308-02,TC-311-02,TC-312-02,TC-313-02,TC-314-02,TC-320-01,TC-323-01,TC-501-02,TC-503-02,TC-504-02,TC-505-02,TC-507-02,TC-509-02,TC-510-02,TC-511-02,TC-512-02,TC-517-02,TC-601-02,TC-701-02,TC-801-02
T8100C,T8120C,T8121C,T8122C,T8123C,T8153C,T8231C,T8232C,T8240C,T8293C,T8300C,T8310C,T8311C,T8314C,T8403C,T8424C,T8431C,T8432C, T8433C,T8448C,T8449C,T8451C,T8461C,T8471C,T8480C,T8800C,T8801C, T8830C,T8831C,T8833C,T8842C,T8846C,T8850C,T8891C,T8312-4C,T8312-7C,T8131,T8173,T8444,T8834,T8841,T8295,T8296,T8297,T8201,T8226,T8086,TC322-02,TC324-02,TC325-02,TC-310-02,TC-321-01,TC-322-02,TC-324-02,TC-325-02,TC-521-02
T8110B, T8111C, P8110B, ICS Triplex, Plantguard
T8110B Processor
Description
Trusted TMR processor contains and executes the operating and application software programs in a triple redundant, fault tolerant controller system.
The fault tolerant design contains six fault containment regions. The three synchronized processor fault containment regions contain respectively a 600 series microprocessor, its memory, voter and associated circuits.
The non-volatile memory is used to store the configuration and application programs for the system.
Each processor has an independent power supply fed from the dual redundant 24Vdc power supply of the Trusted controller chassis backplane. The processor power supplies provide short circuit protection and regulated power to the module electronics.
The processor operates concurrently to achieve triple modular redundancy and fault tolerance. By providing 2-out-of-3 hardware voting on every inter-processor exchange and memory data retrieval, uncompromised fault detection and error-free operation are assured.
Trusted TMR processor communicates with other modules via a backplane mounted, triplicated inter-module bus. Additionally, the interface modules are used to support communication with I/O sub-systems and other equipment.
Module faults are automatically detected, time-stamped, and stored for historical review. Transient faults, once they are recorded, are cleared automatically without nuisance alarming. Permanent faults in a processor are annunciated on the front panel of the module, without disturbing ongoing processing in the two remaining processors.
When a failed Trusted TMR processor is replaced, it is automatically initialized without external loader or other equipment.
Application programs are developed using the full suite of IEC 1131-3 languages. The user can load, run, stop, single-step or delete the application program. A front panel maintenance enable key-switch allows the download of application programs.
Features
Triple modular redundant, fault tolerant 3-2-0 operation.
Two-out-of-three voting on internal operations.
Automatic fault handling without nuisance alarming.
Trusted operating system kernel (IEC 61508 SIL3).
Time-stamped fault historian.
Module replacement without program down-loading.
Non-volatile memory for program storage.
Full suite of IEC 1131-3 languages.
Multiple process program execution.
TÃ?V certified for safety, SIL3.
Description
The Trusted Communications Interface Adaptor T8153 is designed to be connected directly to the rear of a Trusted Communications Interface Module in a Trusted Controller Chassis T8100. The Assembly provides a communications connection interface to remote systems. Connection between the Assembly and the Trusted Communications Interface module is via a 78+2-way Inverse DIN41612 M-type connector (SK1).
The Assembly comprises a printed circuit board (PCB) on which the communications ports and socket SK1 (connector to the Trusted Communications Interface) are mounted. The Assembly is contained within a metal enclosure and is designed to be clipped onto the appropriate connector at the rear of the Controller Chassis. A release button is provided to enable the Assembly to be disconnected.
The communications port available at the Assembly are RS232 (one each of full and partial), RS485 (both direct and multi-drop) and Ethernet (10BaseT and 100BaseT).
Features
Allows easy access for external systems to communicate with a Trusted System.
Easy installation i.e. connects directly to the back of the Trusted Communication Interface
Two 10/100BaseT connections.
Four RS422/485 connections.
Two RS232 connections (one full RS232).
General Information
Product ID: 3BSE030220R9
Medium Description: CI854AK01 PROFIBUS-DP/V1 interface
Package including:
- CI854, Communication Interface
- TP854, Baseplate
For new installations, please order CI854BK01 (3BSE069449R1) instead.
Country of Origin: United States/India
Customs Tariff Number: 85389091
Height: 185 mm
Length: 127.5 mm
Width: 59 mm
Weight: 0.59 kg
Product Type: Communication Module
Replacement Product ID (NEW): 3BSE030220R1
Description
The Trusted communication interfaces provide the Trusted controller with an intelligent communication interfaces which act as a relay between the Trusted processor and other systems, i.e. the engineering workstation (EWS) and third party systems. This minimizes communications loading of the Trusted processor.
The module has a Motorola 600 series processor and MPC106 PCI bridge/memory controller, its associated memory and glue logic. There is also a site for a PCI mezzanine card for future expansion.
The module communicates with the Trusted processor via the triplicated inter-module bus (IMB). When polled by the processor, the modules bus interface 2-oo-3 votes the data from the IMB, and transmits back its reply via all three channels.
The module implements communications processing under the control of the Trusted processor. Messages received from the processor or an external link are validated undergo the necessary protocol conversion and are then forwarded to their destination.
An electrically isolated RS232 diagnostics serial port is provided on the front panel of the module for interfacing to the EWS.
The module receives a dual 24V dc supply from the controller backplane. An on-board power supply unit provides voltage conversion for the module electronics, supply conditioning and protection.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
Dual Ethernet and four serial ports available.
Support for a wide range of communications protocols.
Secure, dependable communications via high performance communications links.
Trusted Operating System.
Built-in hardware and software self-testing.
Hot replaceable.
Front panel serial diagnostics port.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
Provision for future system expansion.
Description
The Trusted TMR expander interface module resides in the Trusted controller chassis and provides the master interface between the inter-module bus (IMB) in the controller chassis and the expander bus. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth IMB capabilities.
The module provides fault containment for the expander bus, the module itself and the IMB in the controller chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies.
Communication between the expander interface and the TMR processor is via the IMB on the backplane of the controller chassis. The IMB provides fault tolerance and high bandwidth communications between the interface modules and the TMR processor. All transactions are voted, localizing faults to a Fault Containment Region (FCR) within the IMB they occur.
Communication between the interface module and the TMR expander processor in the expander chassis is via the expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring.
The TMR expander interface module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted controller chassis backplane. Each FCR derives the required supplies independently.
Non-critical monitoring and module status display functions (front panel LEDs) are also provided.
Features
Triple Modular Redundant (TMR) fault tolerant (3-2-0) operation.
Hardware Implemented Fault Tolerant (HIFT) architecture.
Dedicated hardware and software test regimes which provide fast fault recognition and response times.
Automatic fault handling without nuisance alarming.
Hot replaceable.
Front panel status LEDs.
Symphony Plus is designed to maximize plant efficiency and reliability through automation, integration, and optimization of the entire plant.
1948506C8, 6644424A1, ACU1001A, ADAM-4520, BRC300, BRC410, CMM11, CMMTU02, CPS01, EMA11, GPI-S MODBUS, IEMMU11, IEMMU12, IEMMU21, IEMMU22, IEPAS22, IMASI23, IMASO11, IMBLK01, IMCIS22, IMCPM01, IMCPM02, IMDSI13, IMDSI14, IMDSI22, IMDSM04, IMDSO14, IMFCS01, IMFEC12, IMHSS03, IMQRS22, IMSED01, IMSET01, INICI03-SCIL, INICT13A, INIET800, INIIL02-L, INIIT03, INIIT13, INNIS21, INNPM12, INNPM22, INSEM11, INSOE01, INTKM01, MKEB01, MPSIII, NFTP01, NKAS01-15, NKCL01-15, NKCL01-30,NKCL01B-5, NKCL02B-5, NKEB01, NKEB02, NKHS03-15, NKLM01-15, NKLS01-15, NKMP01-2, NKMR02-15M, NKPL01-15, NKSD01-15, NKST01-10, NKST11-15, NKTK01-10, NKTK01-15, NKTL01-3, NKTT01-3, NKTU01-15, NRAI01-A, TU, NRAO01-A, TU, NRDI01-A, TU, NRDI04-A, TU, NRDO02-A, TU, NTAI05, NTAI06, NTAO02-AR, NTCL01, NTCS04, NTDI01-A, NTDI21-A, NTDO02, NTHS03, NTMP01, NTRL02B, NTRL03, NTRL04, NTRO02-A, NTRO03-A, NTRO04-A, NTRO05, NTST01, PEP-A
Description
The Trusted TMR expander processor module resides in the processor slots of the Trusted expander chassis and provides the slave interface between the expansion bus and the expander chassis backplane. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth inter-module bus (IMB) capabilities.
The module provides fault containment for the expander bus, the module itself and the expander chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies.
Communication between the expander processor and the TMR processor is via the TMR expander interface module and the triplicated expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring.
Communication between the expander processor and the I/O modules in the expander chassis is via the IMB on the backplane of the expander chassis. The IMB is identical to that within the controller chassis, providing the same fault tolerant, high bandwidth communications between the interface modules and the TMR processor. As with the expander bus interface all transactions are voted, localizing faults to Fault Containment Region (FCR) within the IMB should occur.
The TMR expander processor module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted expander chassis backplane. Each FCR derives the required supplies independently.
Non-critical monitoring and module status display functions (front panel LEDs) are also provided.
Features
Triple Modular Redundant (TMR), fault tolerant (3-2-0) operation.
Hardware Implemented Fault Tolerant (HIFT) architecture.
Dedicated hardware and software test regimes which provide fast fault recognition and response times.
Automatic fault handling without nuisance alarming.
Hot replacement.
Front panel status LEDs.
General Information
Product ID: 3BSE041882R1
Medium Description: CI840A Profibus DP-V1 Communication Interface, for 1+1 redundant operation.
Technical Information: Supersedes 3BSE022457R1
Product Type: Communication Module
Country of Origin: Estonia /India
Customs Tariff Number: 85389091
Length: 96 mm
Height: 119 mm
Width: 54 mm
Weight: 0.34 kg
General Information
Product ID: 3BSE022366R1
Medium Description: CI801 PROFIBUS DP-V1 Communication Interface
Technical Information: Supersedes 3BSE041444R1
Product Type: Communication Module
Country of Origin: Estonia /India
Customs Tariff Number: 85389091
Length: 58.5 mm
Height: 136 mm
Width: 85.8 mm
Weight: 0.34 kg
General Information
Product ID: 3BSE031155R1
Medium Description: BC810K02 CEX-bus Interconnection Unit
Supersedes 3BSE038692R1
Product Type: Communication Module
Country of Origin: Sweden
Customs Tariff Number: 85389091
Length: 127.5 mm
Height: 185 mm
Width: 59 mm
Weight: 1.55 kg
