Description
The Trusted TMR 24V dc digital output module interfaces to 40 field output devices. Outputs are arranged in five groups of eight outputs. All outputs in a group share a common power source and return. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 output channels.
The module provides on-board sequence of events (SOE) reporting with a resolution of 1ms. The event is the actual sensing of the field device loop current.
Each triplicated section (slice) of the module, receives output data from the Trusted TMR processor and sends its data to an internal safety layer hardware voter. Each slice uses the voted data to control the outputs. Every output channel consists of a six-element voted array. The output switch array provides fault tolerant, uninterrupted control under an output switch failure condition. Output switching and fault diagnostics comply with the demanding requirements of IEC-61508 SIL-3 for First fault - Fault tolerant, and Second fault Fail-safe outputs.
When a module fault is detected, the Trusted TMR processor will flag the unhealthy condition, indicating the need to replace the module. Control continues until a replacement (healthy) module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Each output is user configurable to perform line monitoring of the connected field devices to detect field wiring and load failures. Automatic over-current protection is inherent in every output circuit which eliminates the need for fuses.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR output channels per module.
Five isolated groups of eight outputs each.
Six-element voted output array.
Comprehensive diagnostics and self-test.
Guaranteed, First fault fault tolerant, Second fault fail-safe.
Line monitoring on a per channel basis.
Automatic over-current protection no fuses required.
2500V dc optically isolation.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
On-board 1 ms resolution sequence of events reporting.
Supplier: Branded consumer electronics, televisions, cameras, home appliances, car audio systems, hair curlers, hair trimmers, hair clippers, hair straighteners, beard trimmers, shavers, vacuum cleaners, air purifiers, blenders, mixers, juicers etc, MG3710/15 MG3730/15 MG5720/15 MG7720/15 BT1233/14 BT3206/14 BT3216/14
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
For price, specification and other details please contact us
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Instrumentation circuits cable is used for computer based automatic control system, especially for computer distributed control system, transmission of production device process variable detection, control, interlocking, alarm lamp analog and digital signals, the product has excellent anti-interference performance, long-term working temperature -40~105.
Supplier: Spices, car spare parts, textile, fittings, fruit & vegetables, machinery, medical equipments, electrical fitting, electrical modules, seimens, scneihder electric, abb, ge pipe fittings, pipes, steel, metal bars, plastics, copper, aluminium, footwear, glass, glassware, carpets, flooring materials, felt sheets woven, (pool cloths)watch equipments, construction equipment, rubber bee belt, bearings skf
Services: Clearing agent , transportation , shipping , courier , packaging
Power Modules (IRKT/IRKH/IRKD) IR KT 26 16 1 2 3 4 IR KT KH KD 26 16 Company Code Thyristor â?? Thyristor Type Thyristor â?? Diode Type Diode â?? Diode Type Current Rating PIV x 100 Your Premier Source for Quality Power Modules and Distribution Solutions In the ever-evolving field of Power Electronics, Insel Rectifiers stands out as a symbol of innovation and dependability. As a prominent manufacturer and supplier of Power Modules, we take immense pride in providing state-of-the-art solutions that reshape the way power is distributed. Power Supply Module Excellence Our dedication to excellence shines in the core of our product range â?? Power Supply Modules. Crafted with meticulous design, our modules guarantee peak performance, efficiency, and reliability. They cater to the varied requirements of industries seeking precise power control, be it for electronic devices, industrial applications, or other power-sensitive environments. The outstanding quality of our power supply modules sets them apart in delivering reliable and efficient power solutions. Power Module Manufacturer Prowess As a committed manufacturer of Power Modules, we harness cutting-edge technology and industry knowledge to produce modules that go beyond standard industry benchmarks. Our emphasis on precision engineering, combined with stringent quality control processes, guarantees that every Power Module carrying the Insel Rectifiers insignia is synonymous with durability, efficiency, and innovation. Efficient Power Distribution Modules Our expertise extends beyond manufacturing Power Supply Modules to crafting efficient Power Distribution solutions. Our Power Distribution Modules are tailored to meet the evolving demands of modern industries, facilitating seamless Power Distribution and contributing to the overall efficiency of electrical systems. Trusted Power Module Supplier Insel Rectifiers takes pride in being a trusted Power Module Supplier, catering to the diverse needs of our clients. Whether you are in search of Power Supply Modules for your electronic devices or require robust Power Distribution solutions for industrial applications, we are your reliable partner in the journey toward efficient and reliable power management. Innovation, Reliability, and Beyond At Insel Rectifiers, we go beyond merely supplying Power Modules; we innovate, we excel, and we redefine the Power Solutions landscape. Our commitment to quality, backed by a team of seasoned professionals, positions us as a leader in the realm of Power Electronics. Choose Insel Rectifiers for all your Power Module and Distribution requirements, and immerse yourself in the seamless integration of innovation, reliability, and efficiency within every electrical system. Your pursuit of top-notch Power Solutions concludes here at Insel Rectifiers, where power converges with precision.
Insel Rectifiers: Excellence in Three Thyristor Welding Modules Enter the realm of Insel Rectifiers, where the synergy of excellence and innovation shapes our prowess in welding modules. As a key player in the industry, we take immense pride in unveiling our advanced Three Thyristor Welding Modules. These modules not only underscore our dedication to excellence but also set fresh standards in precision and performance. Unraveling Excellence: Three Thyristor Welding Modules by Insel Rectifiers Insel Rectifiers acknowledges the crucial role of welding modules in attaining superior welding outcomes. Our Three Thyristor Welding Modules stand as a testament to our steadfast commitment to delivering excellence across all aspects of power solutions. Cutting-Edge Technology Our welding modules are crafted with cutting-edge technology, ensuring optimal performance and reliability in diverse welding applications. The incorporation of Three Thyristors elevates precision and control, allowing for enhanced efficiency in welding processes. Precision in Welding Discover excellence in welding with Insel Rectifiersâ?? Three Thyristor Welding Modules. Designed for precision and performance, our modules redefine the standards in welding technology. Whether youâ??re involved in industrial welding, construction, or any application demanding accuracy, trust our modules to deliver unmatched reliability and control, ensuring exceptional welding results. Versatility in Applications Designed to meet the dynamic needs of modern industries, our Thyristor Welding Modules find application across various welding scenarios. From intricate fabrication tasks to heavy-duty welding operations, Insel Rectifiersâ?? modules ensure seamless power control for diverse welding requirements. Reliability and Durability Quality and durability are at the core of our Three Thyristor Welding Modules. Rigorous quality control measures ensure that each module adheres to the highest industry standards, making them a reliable and durable choice for your welding applications. Innovation Unleashed In the field of welding technology, Insel Rectifiers shines as a symbol of innovation. Our passion for pushing boundaries is evident in our Three Thyristor Welding Modules. These modules showcase our unwavering commitment to staying ahead in technological advancements, guaranteeing that our customers not only have solutions that meet but surpass their welding requirements. Choose Excellence, Choose Insel Rectifiers Step into the world of welding excellence with Insel Rectifiers, where our Three Thyristor Welding Modules redefine industry standards. Elevate your welding processes by choosing our state-of-the-art modules, crafted to deliver precision, reliability, and unmatched performance. At Insel Rectifiers, we don't just promise excellence; we uphold a legacy of setting new benchmarks in welding solutions.
