The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
This system is IPL(intense pulse light) +RF(Radio Frequency), which is the best technology in the market. For this system, you can use IPL only or RF only, or IPL+RF together. System Characteristic: 1.handle cooling system: User may adjust the cooling system to improve the treatment result affected by the constant cooling temperature. 2.the handpiece has fast plug in-out. Water and electricity body cut, automatic diagnosis system insetted. Easy and fast to use. 3.built-in expert system: join the clinical experience we accumulated for several years into the expert system to make sure the system is safe and simple to use. 4.you can upgrade this system through computer. 5.customer design Certification Received: CE Mark Treatment range Almost all the skin problem, such as speck, age spot, pigmentation, wrinkle removal, skin rejuvenation, hair removal, sunburn, rough pores and acne removal. Special features 1. Effective shallower hair removal 2. Independent of skin types 3. A more effective technique for skin rejuvenation as the technology allows for sufficient thermal damage of the target area without overheating surrounding tissue structures. Treatment theory The objective of effective permanent hair reduction and skin rejuvenation is to heat up and injure the target, be it a hair follicle or a vascular or pigmented lesion. The job of the intense pulsed light is to heat up the target to the required temperature and thereby lowering the impedance of the target. The RF current then travels along the path of least impedance (preheated path of the intense light) and gently heats up everything in its pathway. This results in further injury to the target and completes the heating (injury) that is necessary for the desired biologic effect, for example to stop hair growing, or for vascular and pigmented lesions to fade. RF f½s effect is pertaining to the electric density which depends on the impedance. And it is not absorbed by melanin and thus independent of skin types. So it is an optimum resolution for the patient of darker skin or of the shallower hair. Specifications: Light source: intense pulse light IPL Energy Out: 0-40J/cm2 IPL Pulse Repetition Rate 0.5Hz RF Energy Out: 0-100J/cm3 Dimensions: 460mmf-500mmf-900mm Weight: 65kg, portable is 38kg around Input Voltage: 230Vf+, 50Hz Operating Panel: 8.4f+f+ TFT Color touch Screen Cooling: 0-5 centigrade Handpieces: SR, HR, VR, AR
System Characteristic: 1.handle cooling system: User may adjust the cooling system to improve the treatment result affected by the constant cooling temperature. 2.the handpiece has fast plug in-out. Water and electricity body cut, automatic diagnosis system insetted. Easy and fast to use. 3.built-in expert system: join the clinical experience we accumulated for several years into the expert system to make sure the system is safe and simple to use. 4.you can upgrade this system through computer. 5.customer design Certification Received: CE Mark Treatment range Almost all the skin problem, such as speck, age spot, pigmentation, wrinkle removal, skin rejuvenation, hair removal, sunburn, rough pores and acne removal. Special features 1. Effective shallower hair removal 2. Independent of skin types 3. A more effective technique for skin rejuvenation as the technology allows for sufficient thermal damage of the target area without overheating surrounding tissue structures. Treatment theory The objective of effective permanent hair reduction and skin rejuvenation is to heat up and injure the target, be it a hair follicle or a vascular or pigmented lesion. The job of the intense pulsed light is to heat up the target to the required temperature and thereby lowering the impedance of the target. The RF current then travels along the path of least impedance (preheated path of the intense light) and gently heats up everything in its pathway. This results in further injury to the target and completes the heating (injury) that is necessary for the desired biologic effect, for example to stop hair growing, or for vascular and pigmented lesions to fade. RF is effect is pertaining to the electric density which depends on the impedance. And it is not absorbed by melanin and thus independent of skin types. So it is an optimum resolution for the patient of darker skin or of the shallower hair. Specifications: Light source: intense pulse light IPL Energy Out: 0-35J/cm2 IPL Pulse Repetition Rate 0.5Hz RF Energy Out: 0-100J/cm3 Weight: 8kg around Input Voltage: 230Vf+, 50Hz Operating Panel:TFT Color touch Screen Cooling: 0-5 centigrade Handpieces: SR, HR, VR, AR
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine HLM-SD-50 Laser tubeSemi-conductor mould Cutting area110mm 110mm /300mm 300mm(optional) Laser power 50w Marking speed0-7000mm/s Operating voltage Ac220 10%, 50hz Location precision 0.003mm Working environmentTemperature: 0-40 centidegree, humidity: 45%-85% Marking depth 0-0.3mm Min. Line width 0.02mm Min. Character 0.2mm Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc. Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary deviceExhaust fan and cooling system Laser wavelength1064nm. Wood case
Technical specifications:. Model HL-YLC500-2010 Cutting zone2000*1000mm Cutting thickness0.2-6mm Laser routeFixed laser route, work piece moving by cross slide working table Transmission methodServo ballscrew Cutting positioningRed light pointer Operating systemWindows 2000/xp Max output power500w Laser wavelength1064nm Pulse frequency1-300hz Min.Linewidth0.15mm Electrical source380v/50hz/100a X/y/z axis geometric positioning accuracy 0.08mm/1000mm X/y/z axis re-orientation accuracy 0.04mm Control systemOffline motion control Cooling system5p water cooling Max cutting speed35mm/s Weight1500kg. Wood case.
1.Introduction The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface. 2. Features Friendly and ergonomical man-machine interface Stable, precise and high-speed system File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers Auto cooling Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional) 3. Technical Parameters Wavelength 1064 nm Pump source Kr lamp Laser cavity Ceramic Laser output stability í_ í+ 3% Beam expanded angle í_ 8 mrad Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.1mm Letter size Min 0.5mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 7kW Dimension 1500 mm x 500 mm x 1200 mm Net weight ~180 kg Cooling Mode Water cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
Three heads: 1.1064nm head for black, blue, brown tattoo; 2.532nm head for red, orange, pink and colorful tattoo; 3.1320nm Carbon peeling head optional for Skin rejuvenation, whitening, tighten pores, acne removal etc. Q-switched Nd:YAG Laser 064nm & 532nm & 1320nm carbon tip optional 100-1000mj; Max 1500mj/2000mj (Optional) Pulse Width: 6ns 250W&500W 1 10HZ(adjustable) 25kg 38*32*48cm
Parameters: Model: ML-LB2 Laser type: Q-Switched Nd: YAG Laser Laser wavelength: 1064&532nm Pulse energy: 0-800mj 0-300mj Width of Pulse(pulse duration): 0-10ns Repetition rate (pulse rate): 1, 2, 3, 4, 5, 6 (adjustable 0.5-3)Hz Light spot: 1-7mm Power supply: 220V, 6A or 110V, 12A With indicator laser light Net Weight: 9kgs; Size: 35cm*25cm*22cm Gross Weight: 16kgs Size: 50cm*35cm*30cm 1SET
Mechanical characteristics : Applied the krypton lamp to the laser source, adopt imported with original packaging key accessories such as ceramic cavity(English), Q-switch (English),Laser source, laser power (Singapore) and so on ,which ensure the high marking precision and speed. Having stable and the long-term work performance that belongs to the general model. Applicable materials and field: 1. Can be carved on the metal and many kinds of nonmetal materials. 2. Widely applied in electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttons, building materials, PVC pipes medical devices, etc. Wooden box and 250kg
