Yag Lens Laser Marking Machine

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Technical parameters
(the working area and laser power can be customized according to requirement)
Model of machine HLM-SD-50
Laser tubeSemi-conductor mould
Cutting area110mm 110mm /300mm 300mm(optional)
Laser power 50w
Marking speed0-7000mm/s
Operating voltage Ac220 10%, 50hz
Location precision 0.003mm
Working environmentTemperature: 0-40 centidegree, humidity: 45%-85%
Marking depth 0-0.3mm
Min. Line width 0.02mm
Min. Character 0.2mm

Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc.
Working tableLift platform up to 1, 000mm from the bottom to the top
Auxiliary deviceExhaust fan and cooling system
Laser wavelength1064nm.


Wood case

1.Introduction
The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface.

2. Features
Friendly and ergonomical man-machine interface
Stable, precise and high-speed system
File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features
Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers
Auto cooling
Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional)
3. Technical Parameters
Wavelength 1064 nm
Pump source Kr lamp
Laser cavity Ceramic
Laser output stability í_ í+ 3%
Beam expanded angle í_ 8 mrad
Aiming laser Red
Linear speed Adjustable, max 5000 mm/ s
Line width Min 0.1mm
Letter size Min 0.5mm
Marking area F=160 mm 70 mm í- 70 mm
F=220 mm 100 mm í- 100 mm
F=250 mm 150 mm í-150 mm
Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 7kW
Dimension 1500 mm x 500 mm x 1200 mm
Net weight ~180 kg
Cooling Mode Water cooling

4.Standard Configuration
Laser machine í- 1 set
PC í- 1 set
Marking software (In English) í- 1 set
Operation manual (In English) í- 1

Wooden Case

Performance Features
1)Taking YAG lamp-pumped solid laser device as the light source,2D fast-speed scanning lences is swing as the scheduled angles under the controling of the computer . The laser focus on the surface of the work piece by F-úclences to form images and realise marking and graph processing.
2)It has the longest application time and the most extensive usage areas and is the most mature technology at present.
3)By using fast-speed scan lens, it can scan the graph in shortest time & finish fine marking process.
4)It can configure auto clamp and baiting production line as Usersª requirements .
5)User can mark data, series number & bar code automatically.
6)User can share & communicate the data with other equipments online.

Application scope and material
Automobile parts : pistons, piston rings, gears, shafts, bearings, clutch, lights
electronic components :
resistance, capacitance, chips, printed circuit boards, such as the keyboard.
Mechanical parts : bearings, gears, standard parts, such as motors.
Instrument : panel signs, precision equipment.
Hardware tools : knives, tools, measuring tool, the cutting tool, etc.,
Daily necessities : handicrafts, zipper, key holder, such as sanitary ware

Technical Data
Laser output power:50W
Standard marking scrope:110 mm110mm
Selective Marking scope: 70mm70mm/175 mm175mm
Marking depth:
0.01~0.3m (can be adjusted according to material)
Marking speed: 7000mm/s
Repeated accuracy: 0.01mm
Laser wavelength: 1064gm
Minimum line width: 0.015mm
Electric power requirement:380V/50HZ
Machine power: 5 KW

Dimensions
ItemDimension (cm)
(LWH)Packing Size (cm)
(LWH)Net WeightGross Weight
Laser Optical System:2412812036113129440 Kgs450 Kgs
Controlling Cabinet:5956806088117
Water-cooling Machine:5470906565147
Total:1.72 M2

Laser cutting (84561000)

Maximum laser power: 50w
Laser wavelength: 1064nm
Beam quality m2: <10
Laser repetition frequency: 50khz
Standard engraving range: 110mm 110mm
Optional engraving range: 50mm 50mm / 150mm 150mm / 300mm 300mm
Engraving depth: 0.3mm
Engraving line speed: 7000mm / s
Minimum line width: 0.02mm
Minimum characters: 0.3mm
Repeatability: 0.003mm
Total power: 5kw
The demand for electricity: 380v / three phase / 50hz/19a or 220v / single phase / 50hz/33a.

Machine characteristics:
Adopt the newest Carbon dioxide laser device , Laser tube life more than 2 million hours ,apply to laser beam cuttingú¼engraving ,making. All parts focus on a cabinet, which operate easily .
Application field:Engraving non-metal materials.
Apply to garment accessories, package , architectural pottery, beverage packing, rubber product, electronic components and so on .
Technical parameters:

Marking scale Marking speed Marking precision Marking depth Maximum output power Laser wavelength Cooling way The machine power
70*70mm <7000mm/s 0.02mm <0.2mm 10w 10.6UM Intelligent aircooled 1kw
Samples


200*160*150
250kg

Technical specifications:.
Model HL-YLC500-2010
Cutting zone2000*1000mm
Cutting thickness0.2-6mm
Laser routeFixed laser route, work piece moving by cross slide working table
Transmission methodServo ballscrew
Cutting positioningRed light pointer
Operating systemWindows 2000/xp
Max output power500w
Laser wavelength1064nm
Pulse frequency1-300hz
Min.Linewidth0.15mm
Electrical source380v/50hz/100a
X/y/z axis geometric positioning accuracy 0.08mm/1000mm

X/y/z axis re-orientation accuracy 0.04mm
Control systemOffline motion control
Cooling system5p water cooling
Max cutting speed35mm/s
Weight1500kg.


Wood case.

Kunshan daxinhua laser technology co., ltd is a manufacturer main to produce laser products, like laser marking machine, laser welding machine, laser engraving machine.

Yag laser welding machine widely used in welding mobile phone battery shell, electronic components, mobile communications, precision instruments, metal products, auto parts, glasses watches and clocks, jewelry, medical equipment, metal parts, mold repair and other industries.