Intelligent home security and safety system GSM Wireless Security Burglar/Intruder Alarm System Description: Our GSM burglarproof alarm system which have GSM network protection, short message sending function. DIY, Customize, easy-to-use and install! It is the updated advanced GSM prepaid module made by Shenzhen AnBoShi Electronic Technology CO., LTD. It features eleven different wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control, etc. Compatible with CCTV surveillance and centre monitoring system. 1. Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programmed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up 11. Enable to setup alarm receiving central through GSM network. Specification: 1. Protection zone: Wire: 2 Wireless: 8 2. GSM band: EGSM900/DCS 1800/PCS 1900MHZ TX RX EGSM 880~915MHz 925~960MHz DCS 1710~1785MHz 1805~1880MHz PCS 1850~1910MHz 1930~1990MHz It can save six alarm telephone number and separately set SMS function or telephone alarm. Transmitting power consumption: 1W 3. LED indicators: 8 4. Low power protected time:
The image alarm, mobile phone and computer receiving Function of product 1. Infrared sensor, the image monitoring and moving objects detection 2. MMS function, when the alarm system alert, it will send the pciture of the local to your cell phone and your e mail. 3. Remote control, gain voice and image information 4. Hiding alarm, guard accident 5. With IR night vision camera, it provides 24-hours monitoring that the image is clear enough 6. Built-in battery, still work during power failure 7. Disposes the extension, monitor area is expanded Suitable place: 1. Family 2. Factory, warehouse 3. Office, financial room, code office 4. Bank, middle and small scale market 5. Supermarket, retail sales... N.W:0.8KG G.W:1.5KG SIZE:20X20X12CM
Intelligent 32 defend Zones Home Security Burglarproof Alarm System Description 1.10seconds voice and message recorded to transmit an alarm 2. Preset 6 phone numbers which can be dial automatically to inform theft recycling 3. The PIR detector can arm or disarm separately 4. Arm or disarm with remote controller or phone in long-distance under password protection. 5. Alarm phone line has a priority when the phone line is engaged 6. With keyboard preset all functions 7. Alarm when phone line is cut 8. Alarm identify each accessory automatically 9. Double numeral coding and ten thousand of group net integration build-in, anti-interfere along ten thousand of users simultaneously using each other. 10. With DC /AC available, emergency rechargeable battery and power supply build-in, both of that are automatically switched. 11. Mute siren setting. 12. This alarm system can work with all of our other products, like smoke detector, gas decetoe, PIR detector, sensor and so on SPECIFICATION: 1. With A built-in siren 2. With two wireless remote controllers (available to order extra more) 3. One wireless magnetic door sensor (available to order extra more) 4. With wireless infrared detector ( valid detecting distance 8~10meter, detecting activate angle: 120 degrees horizontal, 60 degrees vertical) 5. Option: Wireless smoke detector /gas leakage detector/rolling gap detector /active infrared intruder detector 6. Working voltage: AC 220V/240V 7. Input voltage: DC 9v or optional 8. Standby current: 10mA 9. Wireless receiving frequency: 433/315MHz 10. Wireless receiving distance: 100m 11. Alarm volume: 110dB PACKAGE: Box dimensions (L x W x H): 34 x 25 x 7.8cm Carton dimensions (10sets/ctn) (L x W x H): 52.8 x 35.8 x 41cm
GSM Electric power equipment burglarprood alarm systems use GSM short message data transmission mode and Voice Function Platform to accomplish the remote transmission and control of Intelligent Alarm. The Intelligent GSM power transmission alarm system applies to the security of 10KV power electric transformer, power supply electric wire and cable and street lamp line. As well as the power distribute stations. The outer shell is made of completely sealed aluminum casting. With these advantages of being good at waterproof, practical, good quality and stable & credibility etc, the mainframe can apply to various conditions. E. G.: Protect the electric powers equipments of electric power, petroleum, Mineral Mountain, etc. That is to say, the system applies to where need to burglarproof of electric equipments, if any electric wire broken will alarm and inform the user immediately. The system can be used independently as well as with the alarm center. Functions & Features: 1. Can automatically dial 3 telephones and send SMS to 3 cell phones while Triggering. 2. Can monitoring 3 phases loss voltage or any phase failure of the distribute power electric network; 3. Support line-break/ move/ vibration sensors; 4. Anti-dismantle function, if open the faceplate, the system will alarm immediately; 5. Support settings through wireless keyboard or remotely by telephone. 6. Support reports its communication status in pre-set time everyday. 7. Waterproof shell, apply to outdoor conditions. 8. Equipped with inner backup high performance rechargeable battery. 9. Guarding electric equipments which need to burglarproof of them. 10. Work with our GSM alarm surveillance system, which is one of the Specialized management system for our power GSM alarm system, it have the map display, when any one of the alarm system alert, you can find the ditails like address, position, number of the transmission and so on. 11. Back up Power Supply, when the power off the standby power will run at lest 36 hours. And the battery can be charged itself. Weight:3kg/set.
Product Description 1. Stand alarm volume: 88db at a distance of 10 cm 2.It is mainly suitable for some pilot stores with low risks of theft. It does not support clamp. There is no internal cable for the stand. 3.Safe zone limit:1.5 0.5M
Technical Parameter: GSM frequency: 900/1800/850/1900MHz (standard) Working frequency of detectors: 315M & 433M (standard) Alarm mode: GSM SMS and voice dialing Alarm response time: Less than 8s (Normal GSM signal) The volume of siren: More than 110db Power requirements: AC 110-240V 50Hz or 60Hz output DC12V Working power consumption: less than 0.6W Standby battery: DC 8.4V/800MAH (lithium battery) Standby battery working time: more than 15 hours Operating temperature: -10 ~ 55 Humidity: Less than 95% non-condensing Dimension:180(L)*130(W)*32(H)mm. Dimension:180(L)*130(W)*32(H)mm Weight: 2.5kg/pcs.
Package Includes: One main unit One wireless door/window magnetic contact One wireless PIR sensor Two remote controllers One White siren One AC adapter One digital keypad One English user manual Main Features: 1. Bulit-in GSM 850/900/1800/1900MHz. 2. The alarm host with 2 relay outputs,one of the relays with linkage function. 3. Support remotely arm/disarm by phone key press/SMS. 4. With independent arm function. 5. Alarm by SMS & Voice,can start-up on-site monitoring. 5. Can configure two-way communication function. 6. Can define alarm guarding zones. 7. With weak GSM dignal reminder and GSM network failure remind function. 8. Wtih external power failure alarm function. 9. With backup lithium battery(built-in 800 mAh). 10. With 10 wireless aalrm zones,2 wired alarm zones,1 wireless fire alarm zone & 1 wireless SOS alarm zone. Technical Parameter: GSM frequency: 900/1800MHz (standard), 850/1900MHz (optional) Working frequency of detectors:3 15M & 433M (optional) Alarm mode: GSM SMS and voice dialing Alarm response time: Less than 8s (GSM in normality) The volume of siren: More than 110db Power requirements: AC 110-220V 50Hz or 60Hz Working power consumption: less than 0.6W Standby battery: DC 8.4V, 800MAH (Lithium battery) Standby battery working time: more than 15 hours Operating temperature: -10 ~ 55 Humidity: 20% to 95% (non-condensing) Dimension: 220(L)*147(W)*38(H)mm. Dimension: 220(L)*147(W)*38(H)mm Weight: 2.5kg/set.
Gsm wireless burglar alarm system Description: Gsm network protection, short message sending function. Diy, customize, easy-to-use And install! ats- is the updated advanced gsm prepaid module made by shenzhen Autosecu technology co., ltd.It features eleven different wireless protection zones, Two wired protection zones, partial disarmed, remote telephone control, remote Electricity control, etc. Compatible with cctv surveillance and centre monitoring system. Features: Wireless type, easy to install, without phone line. Remote control, convenient. Password protected Sms to enable arm/disarm, partial arm/disarm, siren High siren volume so to scare away intruders Sms and auto dial up three phone numbers, locale monitoring start on. Sms to recheck the gsm panel status, alarm report, zone name, arm/disarm status. Audible/mute siren programmed Panic help Ac power shutoff self-detected to avoid malice destroyed, automatically switch to Battery back-up Enable to setup alarm receiving central through gsm network. Specification: Protection zone: wire : wireless: Gsm band: egsm /dcs /pcs mhz Tx rx Egsm ~ mhz ~ mhz Dcs ~ mhz ~ mhz Pcs ~ mhz ~ mhz It can save six alarm telephone number and separately set sms function or telephone Alarm. Transmitting power consumption: w Led indicators: Low power protected time:< s Data responds time: < s (standard network) Working power voltage: ac ~ v - hz (optional) Panel power consumption: < w Battery back-up: dc v standby last > hours Working condition: temperature- f++ f¦ Humidity: - f++ f¦ Net weight:kg. Gross weight:kg. Panel size: mm·+l·¼f- mm·+w·¼f- mm·+h·¼ Standard package : one gsm module, one remote keyboard, two remote controllers, One pir, one door magnetic sensor., one siren output, one adaptor, speacker(ooptional), remoteelectric control(optional)
1) Compact design, orange backlight, night vision, 40 zones LCD display 2) Voice instruction 3) Preset 6 groups of alarm phone numbers 4) Telephone line anti-cutting function 5) Backup rechargeable Li-battery with high capacity 6) Anti-tampering alarm 7) Learning code, easy to add/remove wireless sensors 8) 3 groups of time to arm/disarm the system 9) Siren hooting time(1í½30minutes programmable) 10) Time delay to arm/alarm(0í½99s programmable) 11) Remote control thru mobile phone 12) Sound/mute alarm 13) Record 10 seconds voice message 14) Password protection 15) Record 100 event logs 16) Arm/disarm each zone separately 17) Compatible with ADEMCO alarm report centre 1 Alarm panel 1 PIR Sensor 1 door sensor 2 remote controller 1 adapter 1 telephone line.
