Gsm Wireless Intelligent Burglar Alarm System

Technical Parameter:

GSM frequency: 900/1800/850/1900MHz (standard)
Working frequency of detectors: 315M & 433M (standard)
Alarm mode: GSM SMS and voice dialing
Alarm response time: Less than 8s (Normal GSM signal)
The volume of siren: More than 110db
Power requirements: AC 110-240V 50Hz or 60Hz output DC12V
Working power consumption: less than 0.6W
Standby battery: DC 8.4V/800MAH (lithium battery)
Standby battery working time: more than 15 hours
Operating temperature: -10 ~ 55
Humidity: Less than 95% non-condensing
Dimension:180(L)*130(W)*32(H)mm.



Dimension:180(L)*130(W)*32(H)mm
Weight: 2.5kg/pcs.

Intelligent home security and safety system GSM Wireless Security Burglar/Intruder Alarm System

Description:

Our GSM burglarproof alarm system which have GSM network protection, short message sending function. DIY, Customize, easy-to-use and install! It is the updated advanced GSM prepaid module made by Shenzhen AnBoShi Electronic Technology CO., LTD. It features eleven different wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control, etc. Compatible with CCTV surveillance and centre monitoring system.

1. Wireless type, easy to install, without phone line.
2. Remote control, convenient.
3. Password protected
4. SMS to enable arm/disarm, partial arm/disarm, siren
5. High siren volume so to scare away intruders
6. SMS and auto dial up three phone numbers, locale monitoring start on.
7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status.
8. Audible/mute siren programmed
9. Panic help
10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up
11. Enable to setup alarm receiving central through GSM network.

Specification:
1. Protection zone:
Wire: 2
Wireless: 8
2. GSM band: EGSM900/DCS 1800/PCS 1900MHZ
TX RX
EGSM 880~915MHz 925~960MHz
DCS 1710~1785MHz 1805~1880MHz
PCS 1850~1910MHz 1930~1990MHz
It can save six alarm telephone number and separately set SMS function or telephone alarm. Transmitting power consumption: 1W
3. LED indicators: 8
4. Low power protected time: <1 s
5. Data responds time: <10s (standard network)
6. Working power voltage: AC 110~220V 50-60Hz (optional)
Panel power consumption: <3W
Battery back-up: DC 9v Standby last >4 hours

Standard package: One GSM module, one remote keyboard, two remote controllers, one PIR, one door magnetic sensor, one siren output, one adaptor, speaker(optional), remote electric control(optional)

Standard package: One GSM module, one remote keyboard, two remote controllers, one PIR, one door magnetic sensor, one siren output, one adaptor, speaker(optional), remote electric control(optional)

The image alarm, mobile phone and computer receiving

Function of product
1. Infrared sensor, the image monitoring and moving objects detection
2. MMS function, when the alarm system alert, it will send the pciture of the local to your cell phone and your e mail.
3. Remote control, gain voice and image information
4. Hiding alarm, guard accident
5. With IR night vision camera, it provides 24-hours monitoring that the image is clear enough
6. Built-in battery, still work during power failure
7. Disposes the extension, monitor area is expanded

Suitable place:
1. Family
2. Factory, warehouse
3. Office, financial room, code office
4. Bank, middle and small scale market
5. Supermarket, retail sales...

N.W:0.8KG G.W:1.5KG
SIZE:20X20X12CM

Intelligent 32 defend Zones Home Security Burglarproof Alarm System

Description
1.10seconds voice and message recorded to transmit an alarm
2. Preset 6 phone numbers which can be dial automatically to inform theft recycling
3. The PIR detector can arm or disarm separately
4. Arm or disarm with remote controller or phone in long-distance under password protection.
5. Alarm phone line has a priority when the phone line is engaged
6. With keyboard preset all functions
7. Alarm when phone line is cut
8. Alarm identify each accessory automatically
9. Double numeral coding and ten thousand of group net integration build-in, anti-interfere along ten thousand of users simultaneously using each other.
10. With DC /AC available, emergency rechargeable battery and power supply build-in, both of that are automatically switched.
11. Mute siren setting.
12. This alarm system can work with all of our other products, like smoke detector, gas decetoe, PIR detector, sensor and so on

SPECIFICATION:
1. With A built-in siren
2. With two wireless remote controllers (available to order extra more)
3. One wireless magnetic door sensor (available to order extra more)
4. With wireless infrared detector ( valid detecting distance 8~10meter, detecting activate angle: 120 degrees horizontal, 60 degrees vertical)
5. Option: Wireless smoke detector /gas leakage detector/rolling gap detector /active infrared intruder detector
6. Working voltage: AC 220V/240V
7. Input voltage: DC 9v or optional
8. Standby current: 10mA
9. Wireless receiving frequency: 433/315MHz
10. Wireless receiving distance: 100m
11. Alarm volume: 110dB



PACKAGE:
Box dimensions (L x W x H): 34 x 25 x 7.8cm
Carton dimensions (10sets/ctn) (L x W x H): 52.8 x 35.8 x 41cm

GSM Electric power equipment burglarprood alarm systems use GSM short message data transmission mode and Voice Function Platform to accomplish the remote transmission and control of Intelligent Alarm.
The Intelligent GSM power transmission alarm system applies to the security of 10KV power electric transformer, power supply electric wire and cable and street lamp line. As well as the power distribute stations. The outer shell is made of completely sealed aluminum casting. With these advantages of being good at waterproof, practical, good quality and stable & credibility etc, the mainframe can apply to various conditions. E. G.: Protect the electric powers equipments of electric power, petroleum, Mineral Mountain, etc. That is to say, the system applies to where need to burglarproof of electric equipments, if any electric wire broken will alarm and inform the user immediately. The system can be used independently as well as with the alarm center.

Functions & Features:

1. Can automatically dial 3 telephones and send SMS to 3 cell phones while
Triggering.

2. Can monitoring 3 phases loss voltage or any phase failure of the distribute power electric network;

3. Support line-break/ move/ vibration sensors;

4. Anti-dismantle function, if open the faceplate, the system will alarm immediately;

5. Support settings through wireless keyboard or remotely by telephone.

6. Support reports its communication status in pre-set time everyday.

7. Waterproof shell, apply to outdoor conditions.

8. Equipped with inner backup high performance rechargeable battery.

9. Guarding electric equipments which need to burglarproof of them.

10. Work with our GSM alarm surveillance system, which is one of the
Specialized management system for our power GSM alarm system, it have the map display, when any one of the alarm system alert, you can find the ditails like address, position, number of the transmission and so on.

11. Back up Power Supply, when the power off the standby power will run at lest 36 hours. And the battery can be charged itself.

Weight:3kg/set.

Gsm wireless burglar alarm system

Description:
Gsm network protection, short message sending function. Diy, customize, easy-to-use
And install! ats- is the updated advanced gsm prepaid module made by shenzhen
Autosecu technology co., ltd.It features eleven different wireless protection zones,
Two wired protection zones, partial disarmed, remote telephone control, remote
Electricity control, etc. Compatible with cctv surveillance and centre monitoring system.
Features:
Wireless type, easy to install, without phone line.
Remote control, convenient.
Password protected
Sms to enable arm/disarm, partial arm/disarm, siren
High siren volume so to scare away intruders
Sms and auto dial up three phone numbers, locale monitoring start on.
Sms to recheck the gsm panel status, alarm report, zone name, arm/disarm status.
Audible/mute siren programmed
Panic help
Ac power shutoff self-detected to avoid malice destroyed, automatically switch to
Battery back-up
Enable to setup alarm receiving central through gsm network.


Specification:
Protection zone: wire : wireless:
Gsm band: egsm /dcs /pcs mhz
Tx rx
Egsm ~ mhz ~ mhz
Dcs ~ mhz ~ mhz
Pcs ~ mhz ~ mhz
It can save six alarm telephone number and separately set sms function or telephone
Alarm. Transmitting power consumption: w
Led indicators:
Low power protected time:< s
Data responds time: < s (standard network)
Working power voltage: ac ~ v - hz (optional)
Panel power consumption: < w
Battery back-up: dc v standby last > hours
Working condition: temperature- f++ f¦
Humidity: - f++ f¦
Net weight:kg.
Gross weight:kg.
Panel size: mm·+l·¼f- mm·+w·¼f- mm·+h·¼
Standard package : one gsm module, one remote keyboard, two remote controllers,
One pir, one door magnetic sensor., one siren output, one adaptor, speacker(ooptional), remoteelectric control(optional)

Product Description
1. Stand alarm volume: 88db at a distance of 10 cm

2.It is mainly suitable for some pilot stores with low risks of theft. It does not support clamp. There is no internal cable for the stand.

3.Safe zone limit:1.5 0.5M

1. Built-in GSM industrial module, easy installation and configuration
2. 3 wired zones and 6 wireless zones, each zone can be set as the Bypassing, Burglary or Emergency zone
3. Remotely program the function of the control panel by SMS or phone
4. Can Arm,Disarm by SMS or phone
5. Edit the name of zone by SMS,when alarm,SMS report the alarm information.
6. Real-time, Delay, 24 hours, Bypass defense zones program
7. Short message reporting of AC power failure and power and phone lines fault
8. With the operation password,make sure the safty.
9. 8 seconds pre-recorded alarm message that will be played when alarming
10. 4 pre-set telephone numbers to dial and 4 pre-set telephone numbers to send SMS
11. Automatic switch of AC power and backup batteries.


One set by one clore box, 20boxes by one carton.