Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
Ultra low sulphur diesel EN590 10ppm Specification: colour: STM015 Cerone Number : ASTM 0613 - IP41 Celone Index: fN 1504264
BAPCO origin EN590 10 ppm | FOB Sitra, Bahrain | Only with LC
FOB ROTTERDAM | EN590 10ppm | Kazakh, Qatar, Bahrain, UAE origin | Only with SBLC or BG
FOB ROTTERDAM - DIP and PAY payment terms Specifications added in the picture section. Procedure : - Send LOI to Stoix Trading FZCO to initiate the process and we will send you our SCO. 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in seller's tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyer's desired duration upon successful completion of the trial order.
There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.
Supplier: En590 diesel 10ppm, jet fuel a1, icumsa 45 sugar spot & contract
Buyer: Sugar, metals, oil and gas, plastic
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Supplier: Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose
Services: Import and export of goods and technology
Buyer: Urea 46, diesel oil en590 10ppm, jet fuel a1, dap 18 46 , crude benzene, pure benzene
Supplier: Crude oil, diesel en590 10ppm, jet fuel a1, chemicals, petroleum derivatives
Services: Trading
Buyer: Petroleum derivatives, chemicals
