Ali Ihsan Karadenizli

Paint roller making machine Outline dimension: 6000mm(l) (h)mm Diameter: above 28mm Power: ac380v, 50/60hz Air supply: 0.6mp Average production speed: 2000pcs/h 1> the paint roller making machine has the combination of automatically delivering pipes, unconstant twisting, and automatically sealing, etc. 2> the paint roller making machine is equipped with heating(suitable for pp pipe, flame supervision, temperature adjustment) technology. 3> customized production according to different diameter of pipes and different length of production line 4> approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16, 000 pieces of 9-inch rollers per day(8 hours working time). The gas consumption cost of 9 inches rolling brush is only 0.01 rmb. 5> compared with the similar european devices , our machine is cheaper but with high quality, short investment feedback period and low maintenance fee. 6> this paint roller making winding machine needs only one person. Wooden case

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Outline dimension: 6000mm(L)Ã?1600mm(W)Ã?2200(H)mm Area for machine place at factory:6x2.5m Diameter: 15mm~ 56mm Tube Length: 1.23m~1.85m Power: AC380V/220V,50/60HZ, 3phases Air Supply: 0.6MP Average production speed: 2000pcs/H Loader: above 100pcs (could be customized) Operator: only 1 person Gas consumption: 15kgs/tin for 16hours machine running Oxygen consumption: 15mpa/tin, 4tins for 16hours machine running 1> The paint roller winding machine has the combination of automatically loading pipes, consistent continuous winding, and automatically sealing, no glue or solvents are necessary. 2> The paint roller winding machine is equipped with thermobonding / thermofusion (suitable for PP pipe,flame supervision,temperature adjustment) technology. 3> Customized production according to different diameter of pipes and different length of production line 4> Approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16,000 pieces of 9-inch rollers per day(8 hours working time). 5> Compared with the similar European devices ,our machine is cheaper but with high quality, short investment feedback period and low maintenance fee. 6> Fast changeover between different diameter.

Supplier: It offers paint roller and other paint equipment tools
Services:
Buyer: Paint roller fabric