Paint Roller Making Machine

Outline dimension: 3600(l)*1200(w)*1600(h) Diameter: above 28mm Length: up to 300mm Power supply: ac380v, 50/60hz Air supply: 0.6mp Speed: up to 1000 pcs/h 1> the paint roller machine is one-off completion of cutting, combing, bevelling, shearing and vacuum cleaning. 2> manufacturing customized device according to different diameter and length 3> the machine only needs one person to operate. Wooden case

Supplier: Paint roller machine, paint roller making machine, paint roller finishing machine, paint roller winding machine

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Supplier: Electrical materials, electrical equipments, lighting fixtures, plumbing materials, ac materials, it materials, ceiling materials, partition materials, painting materials, floor tiles, hardware materials, hand tools & power tools, garage tools, wooden & carpenter materials, batteries. medical equipment and medical consumable product and medical surgical equipment.

Outline Dimension: 3600(L)*1200ï¼?Wï¼?*1600ï¼?Hï¼? Area for machine place at factory: 1.2x1.5+1.65m Diameter: from 20mm to 57mm Wound tube Length: 1.23m ~3.4m Finished Roller Cover Length: from 3" to 10" Power Supply: AC380V/220V,50/60HZ, 3phases Air supply: 0.6MP Speed: Up to 1000 pcs/H Operator: only 1 person Controller: touch screen 1> This paint roller finishing machine is one-off completion of Cutting, Combing, Beveling, Vacuum cleaning. 2> Manufacturing customized device according to different diameter and length 3> The paint roller finishing machine is PLC operated. 4> Fast changeovers between different inner diameter.

Outline dimension: 6000mm(L)Ã?1600mm(W)Ã?2200(H)mm Area for machine place at factory:6x2.5m Diameter: 15mm~ 56mm Tube Length: 1.23m~1.85m Power: AC380V/220V,50/60HZ, 3phases Air Supply: 0.6MP Average production speed: 2000pcs/H Loader: above 100pcs (could be customized) Operator: only 1 person Gas consumption: 15kgs/tin for 16hours machine running Oxygen consumption: 15mpa/tin, 4tins for 16hours machine running 1> The paint roller winding machine has the combination of automatically loading pipes, consistent continuous winding, and automatically sealing, no glue or solvents are necessary. 2> The paint roller winding machine is equipped with thermobonding / thermofusion (suitable for PP pipe,flame supervision,temperature adjustment) technology. 3> Customized production according to different diameter of pipes and different length of production line 4> Approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16,000 pieces of 9-inch rollers per day(8 hours working time). 5> Compared with the similar European devices ,our machine is cheaper but with high quality, short investment feedback period and low maintenance fee. 6> Fast changeover between different diameter.

Paint Roller Finishing Machine V2 with Adjustable Tube Length Outline Dimension: 3600(L)*1200ï¼?Wï¼?*1600ï¼?Hï¼? Area for machine place at factory: 1.2x1.5+1.65m Diameter: from 20mm to 57mm Wound tube Length: 1.23m ~3.4m, tube length could be adjustable according to different paint roller cover length. Finished Roller Cover Length: from 3" to 10" Power Supply: AC380V/220V,50/60HZ, 3phases Air supply: 0.6MP Speed: Up to 1000 pcs/H Operator: only 1 person Controller: touch screen 1> This paint roller finishing machine is one-off completion of Cutting, Combing, Beveling, Vacuum cleaning. 2> Manufacturing customized device according to different diameter and length 3> The paint roller finishing machine is PLC operated. 4> Fast changeovers between different inner diameter. Upgrade feature: tube length could be adjustable according to different paint roller cover length. Take 5" roller cover for example, if the tube length settled at 1650mm, the actual using length maybe at 1635mm afterthermobonding(expand with heat and contract with cold). So 1635mm/127mm(5")=12pcs roller cover + 111mm wastages. However, on this upgrade machine, you could change to the most suitable and economical tube length between 1.65m to 1.85m for different roller cover length. If change the tube length to 1793mm, the actual using length comes to 1778mm after expansion and contraction, therefore, 1778mm/127mm(5")=14pcs roller cover and no wastage.

we manufacture and supply different materials of paint rollers and roller frames