Differences between Spray Paint and Electrostatic Powder Coating: 1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes. 2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns. 3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health. 4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius. 5. The same grade of Powder is cheaper than lacquer. 6. The strength of the powder is better than the ordinary paint. 7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost. Hebei Hanna technology CO., LTD. 's Fast Automatic Powder Color Changing System can change color rapidly for 15 minutes. It saves manpower and time. This is really good for you if you have more color on your workpiece to change. And the Big Cyclone can achieve 99.2% recovery. It's economical and environmentally friendly.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Supplier: Waterproofing material, polyurethane waterproofing material, koli 288, koli 250, polyurea, koli 900, koli 850, polyurethane waterproofing agent, waterproof agent, water based acrylic waterproofing material, koli ac50, koli ac90, primer, top coating
Services: Guide for usage of products
Supplier: Electrical materials, electrical equipments, lighting fixtures, plumbing materials, ac materials, it materials, ceiling materials, partition materials, painting materials, floor tiles, hardware materials, hand tools & power tools, garage tools, wooden & carpenter materials, batteries. medical equipment and medical consumable product and medical surgical equipment.
Spray Painting guns with integrated cascade, excellent atomization, high transfer efficiency and ultimate safety standard. There are a few models available, all of which function with stable performance, achieving excellent surface finishing result and coping with the difficulties to most competitive suppliers.
Polyester RAL7035 Powder Coatings with Smooth Glossy or Wrinkle are available
Supplier: Testing instruments for flexible packaging industry, ink, paints, adhesives, silicone release properties
Supplier: Disinfection, household cleaning products
industrial cleaning, phosphating and rust removers , horse care products, car cleaning products , uv varnish , insulating primers , paint strippers
rust inhibitors
Services: Oem service
Buyer: Methylal, dimethylcarbonate, dioxolan
Supplier: Electrostatic Powder Coating Equipment, Manual Powder Coating Machine, Powder Spray Gun, Powder Coating Pistol, Liquid Painting Machine, Reciprocator, Powder Coating Spare Parts, Powder Spray Booth, Powder Coating Oven, Curing Oven, Powder Hopper, Powder Injector, Cascade