Media converter Parameter Specifications Access mode 10/100mbps Standard Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree Wavelength 850nm/1310nm/1550nm Transmission distance Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m Port One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm) Conversion mode Medium conversion, storing and forwarding Mac address table I k Buffer space 1mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
Media converter Two 10/100m electrical ports, one single-mode or multi-mode optical port Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions. Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted Supports management based on web, snmp, telnet or local console Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found) Supports llcf(report the disconnected alarm message to local network administration) Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management Supports open or close electrical and optical ports through via the far end network management Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp Physical property: Input power: ac 100v~220v or dc 48v Dimension: 191mm x 110mm x 25mm Environment requirements: Operating temperature: 0¦-50¦ Storage temperature: -40¦-70¦ Environment humidity: 5-90%(non-condensing) Export carton with inner box
Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type Specifications: Interface: Left side: One 10gbps rj-45 port One 10gbps sfp + port (mini-gbic) Right side: One rs-232 console port (rj-45 connector) One power jack Wire speed cable length: up to 100m cat6a cable for wire speed transmission Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r Temperature:
Main features In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm Half duplex: back pressure flow control Full duplex: IEEE802.3x flow control Automatic identification of MDI/MDI-X cross line Technical parameter: Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard Connector: one UTPRJ-45 connector, one SC/ST connector Operation mode: full duplex mode or half duplex mode Power supply parameter: Adapter(External): 110-265V AC input, 5V1A DC output Power(Internal): 110-265V AC input, 5V1A DC output Environmental temperature: 0 - 50 Relative humidity: 5%-90% TP cable: Cat5 UTP cable Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140ª¦m single mode: 8.3/125, 8.7/125, 9/125 or 10/125 Dimensions: Power external: 94mm(L)x 71mm(W) x 26mm(H) Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Technical parameter 1. According with ieee802.3ab/z, ieee802.3u, ieee802.3x, ieee802.1q, 10base- t, 100b ase-tx, 1000base-tx, 1000base-sx, 1000base-lx standard. 2. Support tcp/ip, pppoe, dhcp, icmp, nat protocol. 3. Flow control: full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4. Eletricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port support auto-mdi/mdix automatic reverse. 6. Support storage transmit mode, cache capability is 256k. 7. Support electricity port 1000m mode and self-adapt mode's switch. 8. Afford the state indicator, external power(output 5v~50hz 1a). 9. Interface: electric port: rj-45 fiber port: sc 10. Twisted-pair: cat. 5 cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0 ~ 50degree 13. Storage temperature: -20 ~ 70degree 14. Humidity: 5% ~ 90%(noncondensing) 15. Size: 118mm*86mm*27mm(l*w*h) Specification Connect type: sc/fc/st Fiber type: singlemode Wavelength: 1310nm Typical distance: 40km Min tx pwr: -6.0dbm Max tx pwr: 0.0dbm Sensitivity: < -24dbm Link budget: 18.0dbm 0.5kg/pcs
Media Converter, 10/100M 1310nm SM 5km Fiber optic media converter Skype:wirenettehnology Features : Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets. Surporting : The transmission of extra-long packes over VLAN Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users. Technical specifications Parameter Specifications Access mode 10/100Mbps Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Transmission distance Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m Port One RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125¦m) Single mode - SC/FC fiber port (fiber size: 9/125¦m) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125¦m) Conversion mode Medium conversion, storing and forwarding MAC address table I K Buffer space 1Mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console They can realize the integrated management to all chassis. Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port. Supporting remote and local management. With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters. Standard package
Built-in ip-based web interface. Supporting remote and local management. Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode Manual ip address setting/dhcp client for ip address assignment. Event trap and snmp trap support. Password setting, ip setting and devices description setting through planet smart discovery utility Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module. Standard package per customer
10gbps fiber to copper media converter for long distance transmission Network management function web snmp console Support dmi function for sfp+ fiber module Support itut prescribed dwdm/cwdm wavelength Media converter for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Sfp+ fiber module detection, utp cable length detection Support hot plugging Type: rj45 to/from sfp+. Standard package per customer
