Technical parameter
1. According with ieee802.3ab/z, ieee802.3u, ieee802.3x, ieee802.1q, 10base- t, 100b ase-tx, 1000base-tx, 1000base-sx, 1000base-lx standard.
2. Support tcp/ip, pppoe, dhcp, icmp, nat protocol.
3. Flow control: full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard.
4. Eletricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed.
5. Port support auto-mdi/mdix automatic reverse.
6. Support storage transmit mode, cache capability is 256k.
7. Support electricity port 1000m mode and self-adapt mode's switch.
8. Afford the state indicator, external power(output 5v~50hz 1a).
9. Interface: electric port: rj-45 fiber port: sc
10. Twisted-pair: cat. 5 cat. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125um
12. Working temperature: 0 ~ 50degree
13. Storage temperature: -20 ~ 70degree
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 118mm*86mm*27mm(l*w*h)
Specification
Connect type: sc/fc/st
Fiber type: singlemode
Wavelength: 1310nm
Typical distance: 40km
Min tx pwr: -6.0dbm
Max tx pwr: 0.0dbm
Sensitivity: < -24dbm
Link budget: 18.0dbm
0.5kg/pcs
Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available
Technical parameter 1. According with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE802.3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is 256K. 7. Support electricity port's 1000M mode or self-adapt mode's switch. 8. Support state indicator, external power(output 5V~50Hz 1A) 9. Interface: Electricity port: RJ-45 fiber: SC 10. Twisted-pair: Cat. 5 Cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0~50 degree 13. Storage temperature: -20~70 degree 14. Humidity: 5%~90% 15. Size: 32*128*158mm (H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelength: 1310/1550nm Typical distance: 20KM Min TX PWR: -6.0dBm Max TX PWR: 0.0dBm Sensitivity: < -22dBm Link budget: 16.0dBm Size: 32*128*158mm (H*W*L) 1KG/pair
Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm
Technical paramter 1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX, 100Base-FX standard. 2. Support TCP/IP PPPOE DHCP ICMP NAT protocol 3. Flow control mode: Full duplex adopt IEEE802.3X, half duplex adopt Backpressure's standard. 4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed. 5. Prot supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode 7. Support electricity port's 10M 100M mode or self-adapt mode's switch. 8. Afford of state indicator, external power(output 5V-50Hz 1A) 9. Interface: Electric port RJ-45 fiber port: SC 10. Twisted-pair: CAT. 5 CAT. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125uM 12. Working temperature: 0~50degree 13. Storage temperature: -20~70degree 14. Humidity: 5% ~ 90%(noncondensing) 15. Size: 26*70*94mm(H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelengh: 1310/1550nm Typical distance: 20KM Min TX PWR: -18.0dBm Max TX PWR: -8.0dbm Sensitivity:
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm
Media converter Parameter Specifications Access mode 10/100mbps Standard Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree Wavelength 850nm/1310nm/1550nm Transmission distance Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m Port One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm) Conversion mode Medium conversion, storing and forwarding Mac address table I k Buffer space 1mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
Media converter Two 10/100m electrical ports, one single-mode or multi-mode optical port Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions. Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted Supports management based on web, snmp, telnet or local console Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found) Supports llcf(report the disconnected alarm message to local network administration) Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management Supports open or close electrical and optical ports through via the far end network management Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp Physical property: Input power: ac 100v~220v or dc 48v Dimension: 191mm x 110mm x 25mm Environment requirements: Operating temperature: 0¦-50¦ Storage temperature: -40¦-70¦ Environment humidity: 5-90%(non-condensing) Export carton with inner box
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type Specifications: Interface: Left side: One 10gbps rj-45 port One 10gbps sfp + port (mini-gbic) Right side: One rs-232 console port (rj-45 connector) One power jack Wire speed cable length: up to 100m cat6a cable for wire speed transmission Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r Temperature:
Main features In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm Half duplex: back pressure flow control Full duplex: IEEE802.3x flow control Automatic identification of MDI/MDI-X cross line Technical parameter: Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard Connector: one UTPRJ-45 connector, one SC/ST connector Operation mode: full duplex mode or half duplex mode Power supply parameter: Adapter(External): 110-265V AC input, 5V1A DC output Power(Internal): 110-265V AC input, 5V1A DC output Environmental temperature: 0 - 50 Relative humidity: 5%-90% TP cable: Cat5 UTP cable Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140ª¦m single mode: 8.3/125, 8.7/125, 9/125 or 10/125 Dimensions: Power external: 94mm(L)x 71mm(W) x 26mm(H) Power internal: 150mm(L) x 110mm(W)x 28mm(H)