Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on. The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories. Main technical performances: Rotor diameter (m): 5.0 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 5000/7500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-25 Survived wind speed: 40 Rated rotate speed(r/min): 300 Start torque (n/m): 4.5 Working voltage: dc48v/dc240v Generator style: three phase, permanent magnet, ac Charging method : constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 8/10/12/13/15/18 Life time: >15years Generator/blade/tail /hub 164*61*38cm 140kg Controller 49*45*31cm 16kg
The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on. The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories. Main technical performances: Rotor diameter (m): 5.0 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 5000/7500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-25 Survived wind speed: 40 Rated rotate speed(r/min): 300 Start torque (n/m): 4.5 Working voltage: dc48v/dc240v Generator style: three phase, permanent magnet, ac Charging method : constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 8/10/12/13/15/18 Life time: >15years Generator/blade/tail /hub 164*61*38cm 140kg Controller 49*45*31cm 16kg
Rotor Diameter (m): 5.5 Material and number of the blades: Reinforced fiber glass*3 Rated power/maximum power: 5000/6000w Rated wind speed (m/s): 10 Startup wind speed (m/s): 2.5 Working wind speed (m/s): 3~25 Survived wind speed: 50 Rated rotate speed(r/min): 260 Working voltage: DC48V/120V/240V/300V/350V Generator style: Three phase, permanent magnet Charging method: Constant voltage current saving Speed regulation method: Yaw+ Auto brake Weight: 357kg Tower height (m): 12 Suggested battery capacity: 12V/200HA Deep cycle battery 20pcs Life time: 15years. Wooden case.
Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 5Kw , 5000W Maximum output power: 9500W working voltage: DC48/96/120/240/500V,AC220V/380V Annual average energy production: 11315KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch-www.windpowercn.com Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Product feature: 1.Low start wind speed and starting torque, high generating efficiency 2.Permanet magnet wind turbine generator, durable in use 3.Yaw motor system and pitch system, aerodynamic brake & manul brake 4.Glassfibre high efficiency blades 5.Simple construction, easy install and minimal maintenance 6.Service life is more than 15 years Packaging details: plywood cases or according to your need Delivery detail: within 7 -15 days, this according to the quantity
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Performance: Rated power: 5 kw Generator parameters: Type: pmg 3 phase Rated voltage: ac 250v Rated current: ac 11.5a Protection level: ip54 Controller output: Output voltage(on-grid): dc 50-375v Output voltage(off-grid): dc 48v/110v Over speed protection & braking system: Speed control style: pitch control system Brake style: automatic hydraulic brake Advantages of vawt: Nearly quiet Birds friendly More safety features Wonderful performance at low wind speed Captures wind from all directions Longer working life Less maintenance Less requirements on foundation Advantages over other vawt: High efficiency Pitch control to govern speed Automatic hydraulic brake 7 cubic meters, gross weight 1120kgs, net weight 995kgs A 40ft open top container can hold 8 units. (excluding the tower)
Aluminum blades are durable, strong and not afraid of any external influences. At the same time, they are heavier than plastic ones and require careful wheel balancing.
basic parameters rated power(w) 3000 survivel wind speed(m/s) 45 max power(w) 3500 wind wheel diameterm(m) 5.8 rated voltage(v) 220/560 blade length(m) 2.71 rated revolution(r/m) 240 swept area(m2) 26.4 cut-in speed(m/s) 1 blade material FRP cut-off wind speed(m/s) 25 generator life 20 sone key technology control method adjust speed method centrifuge variable pitch brake method electromagnetic generator generator configuration 3-phase 380/220v 50/60hz generator type 3-phase permanent magnet protect class
Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Wind Turbine
Rated Power: 5kw Rated Wind Speed: 12m/s Cut-In Speed: 4m/s Cut-out Speed: 25m/s Subsistence wind speed: 55m/s Mill Diameter: 4m Mill Height: 4.6m Mill Weight: 975kg Tower Height & Weight: 5.5m (650kg) Generator type: PMG 3 phase Generator Rated Voltage: AC 250V Generator Rated Current: AC 11.5A Generator Protection Level: IP54 Controller Output Voltage (On-grid): DC 80-400V Controller Output Voltage (Off-grid): DC 110V Governed Speed Style: Aerodynamic Pitch Control Brake Style: Automatic Mechanical Brake system
High efficiency Breeze start up Long lifetime, free of maintenance Easy installation Heavy wind resist, low noisy Anti-rust, anti-corruption Damp-proof, water-proof, stand-proof Wind generator warranty: generator 3 years, other parts 1 year. Service: in the warranty period, if the system parts is broken, our factory can exchange the new part for free of charge. The specification of 5000w wind generator Model xq-5000 Rated power(w) 5000 Maximal power(w) 7500 Rated rotation(rmp) 400 Starting torque(n/m) 6 Reted speed(m/s) 10 Cut-in speed(m/s) 3 Normal working speed(m/s) 4-25 Shut down(m/s) 50 Normal output voltage(dc) 120 Optional output voltage(dc) 56-500 Optional minimum outpvoltage(dc) 56 Blade diameter(m) 6 Blade material enhanced frp Number of baldes 3 The weight of the main power(kg) 500 The height of the tower(m) 9 The weight of the tower(kg) 350 Recommended battery capacity(ah*n) 12v*150ah*20 Export packing standards
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields. MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ. It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain. It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others. Our wind generator' main parameters and sizes are as follows: 1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind 2 Leaf Blade Pattern: Propeller 3 Leaf Blade Number: 3 pieces 4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m. 5 Rated Speed: 160----400 revolutions/Minute, 6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW 7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V 8 Matches the accumulator cell: 480V, 9 Starting Wind Speed: 3.0 meters/ Second 10 Design Wind Speed: 8~ 9 meters/ Second 11 Operating Region: 3~20 rice/ Second 12 Hand of Rotation: Clockwise (face wind wheel) 13 The Wind cans the utilization factor: 0.4 14 High Speed Ratios: 6: 1 to 8: 1 15 Velocity Modulation Way: Leaning tail + electric brake 16 Sets Up an Altitude: 6-9meters Place of Origin: Qingdao, Shandong, China. Availability size: Based on the customer's requirements. Fabrication: Based on the customer's requirements and other technical data agreed by both parties. Package: packed with wooden case Terms of Payment: L/C, T/T Minimum Order Quantity: 1sets Port of Loading: Qingdao Port Delivery Time: one month or based on the customer's needs. Export standard package or as per client
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades