Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose centralite ii wind turbine gearbox accessories.Import and export of goods and technology
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Aluminum blades are durable, strong and not afraid of any external influences. At the same time, they are heavier than plastic ones and require careful wheel balancing.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Aeolos-h 30kw wind turbine, with aeolos patented three-phase permanent magnet direct drive generators, no gearbox or booster device, have a characteristic of safety, reliability and long period life. The low-speed wind generator of aeolos-h 30kw can reduce noise, increase wind energy utilization effectively. It is divided into off-grid and grid-connected type, which is designed for large farms, villages, schools, hospitals, small industrial enterprises and small wind farm. Aeolos-h 30kw wind generator produces annual 130, 000 kwh at 7m/s wind speed in some windy area. Aeolos wind turbine 30kw specification Rated power 30 kw Maximum output power 34 kw Output voltage 320-480 v Blade quantity 3 glass fiber blades Rotor blade diameter 12.5 m (41.0 ft) Start-up wind speed 3.0 m/s (6.7 mph) Rated wind speed 10 m/s (22.3 mph) Survival wind speed 45 m/s (100.7 mph) Generator three phase permanent magnetic generator Generator efficiency >0.85 Turbine weight 1380 kg (3042.3 lbs) Noise 41.5 db(a) @ 5m/s Temperature range -20ípc to +50ípc Design lifetime 30 years Warranty standard 5 years extended 10 years
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields. MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ. It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain. It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others. Our wind generator' main parameters and sizes are as follows: 1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind 2 Leaf Blade Pattern: Propeller 3 Leaf Blade Number: 3 pieces 4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m. 5 Rated Speed: 160----400 revolutions/Minute, 6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW 7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V 8 Matches the accumulator cell: 480V, 9 Starting Wind Speed: 3.0 meters/ Second 10 Design Wind Speed: 8~ 9 meters/ Second 11 Operating Region: 3~20 rice/ Second 12 Hand of Rotation: Clockwise (face wind wheel) 13 The Wind cans the utilization factor: 0.4 14 High Speed Ratios: 6: 1 to 8: 1 15 Velocity Modulation Way: Leaning tail + electric brake 16 Sets Up an Altitude: 6-9meters Place of Origin: Qingdao, Shandong, China. Availability size: Based on the customer's requirements. Fabrication: Based on the customer's requirements and other technical data agreed by both parties. Package: packed with wooden case Terms of Payment: L/C, T/T Minimum Order Quantity: 1sets Port of Loading: Qingdao Port Delivery Time: one month or based on the customer's needs. Export standard package or as per client
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
150w, 300w, 600w, 1kw, 2kw, 3kw, 5kw.10kw, 20kw, 30kw, 50kw, 100kw.
Power: 50W Rotor diameter: 700mm Height of blades: 600m Material of blades: Glass Fiber Reinforced Plastic Number of blades: 5 Rated rotor speed: 120r/min Rated wind speed: 7-10m/s Start-up wind speed: 1.3m/s Work wind speed: 1.3-25m/s Survival wind speed: 50m/s Output voltage: AC12V Packing size: 660, 350, 280mm Weight: 15KG.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
250KW Wind turbines.
PV panels from 40W to 300w Wind Turbine from 200w to 3 kva Modified & sine wave inverters. Standard export package.
We are a renown manufacturer of wind turbine with nearly 30 years his in china. Technology: pitch controlled. No notily.
Horizontal axis wind turbine technical parameter 2000w Performance Rotor diameter 3.2m noise test report Blades quantity 3 pcs wind speed(m/s) noise(db) Direction always downwind 3 24.6 Blades material glass fiber 4 24.8 Rated output 2000w 5 29.5 Maximum output 2500w 6 35.2 Initial voltage 96v 7 40.7 Initial wind speed(m/s) 3m/s 8 48.2 Nominal wind speed(m/s) 9m/s 9 52.6 Stormstand up to 35m/s 10 61.8 Wind protection autofurl 11 65.8 Rotor speed 280 r/min 12 70.5 Wind turbine type pmg (on constant magnets) remark 1.Noise report (tested by hand held sound level meter) 2.Test position at 12m away from generator (average value of 3 point-rear, left, right). 3.The noise value includes wind noise. Working temperature from -40 to +60 c Total capacity(one year) 5000kwh Charge control automatic intelligent control Recommended battery 12v150ah 8pc Batteries full charged about 10 hours Weight(kg) 55kgs (without tower) Packing detail Packing name quatity weight(kg) packing size(mm) packing Generator 1 54.5 660*415*400 plywood box Controller+ inverter (dc96v, ac220v) 1 44.5 650*480*490 plywood box Tower 1 93 3100*320*320 nude Fittings 1 58 660*450*240 plywood box Blades 1 33.5 1640*220*290 plywood box Total 283.5kg 0.76cbm.
