RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC0.01, Overload Capacity: 200% for 1 minute, Power Supply: DC14.2V to 15.8V, Output Voltage: ±1V, Accuracy: 1%, Linearity: 0.2%, Zero Offset Voltage: ±10mV, Dynamic Response Time: 2ms, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Nominal current(rms):50/100/200/300/400/600a Voutipn:+4.000v Measuring range:0~+900a Supply voltage dc:+15v Accurancyipn, +25degree Celsiusless than1.0% Mounting(mm):10.5*20.5 * open- loop supply voltage: dc +15.0v * capable measurement of currents: dc, ac, pulse with galvanic isolation between primary circuit and secondary circuit.
RIT01M has a high gain and measurement 0.2% accuracy in the broad bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on topof currently existing DC sensor technology. Accuracy: 0.2%. Linearity: 0.1%. Zero Offset Voltage: �±10mV. Dynamic Response Time: 2ms. Frequency bandwidth(-3dB): up to 100KHz. Insulation Voltage (Between primary and secondary): 5KV. Operation Temperature Range: -40 ~ 85â??. RIT series leakage current transducer is designed for residual and micro current measurement from 0.01A to 10A, and output with voltage. It has been used for vacuum coating and data center power supply systems.
RIT01M has a high gain and measurement 0.2% accuracy in the broad bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on topof currently existing DC sensor technology. Accuracy: 0.2%. Linearity: 0.1%. Zero Offset Voltage: �±10mV. Dynamic Response Time: 2ms. Frequency bandwidth(-3dB): up to 100KHz. Insulation Voltage (Between primary and secondary): 5KV. Operation Temperature Range: -40 ~ 85â??. RIT series leakage current transducer is designed for residual and micro current measurement from 0.01A to 10A, and output with voltage. It has been used for vacuum coating and data center power supply systems.
Nominal Current(RMS):200/400/800/1000/1200/2000A Vout@Ipn:+_4.000V Measuring Range:0~+_3000A Supply Voltage DC:+-12-15V Accurancy@Ipn,+25degree Celsius:less than +_0.5% Mounting(mm):12.5*41.0
Nominal Current(RMS):25/50/75/100A Vout@Ipn:+_25/50V Measuring Range:0~+_150A Supply Voltage DC:+-12-15V Accurancy@Ipn,+25degree Celsius:less than +_0.5% Mounting(mm):7.0*12.7  * Closed- loop                                        * Supply voltage: DC +-12~15V  * Capable measurement of currents: DC, AC,pulse with galvanic isolation between primary circuit and secondary circuit.
Nominal Current(RMS):30/300A Vout@Ipn:2.500+_2.000V Measuring Range:+_30/+_300A Supply VoltaIpn,+25
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system).
CURRENT TRASDUCER GPA Deyang YOYIK have power plant professional accessories, non-standard pieces, to spare parts for processing. Only need to figure the number of other companies need drawings and drawings number. If you have any questions or concerns, please contact us. YOYIK has a good talent pool, the company is developing, you need to support, in order to witness its growth. Yoyik can offer many spare parts for power plants as below: #DF-CURRENT TRASDUCER GPA-DF Magnetic Resistance Speed Sensor CS-1-G-065-06-01 LVDT 3000TDGN-40-01 Steam turbine bolt electric heating rod ZJ-17-13 HP CASE EXPANSION SENSOR TD-2-25 Digital temperature measuring instrument 3T-1 Bolt electric heating rod ZJ-22-14 LVDT Sensor 4000TD-15-01 Eddy Current Sensor PR6426/010-141 Hydrogen leakage detection device probe LH1500-B FOXBORO FBM214 Eddy Current Sensor PR6422/001-001 VELOCITY SEISMOPROBE 9200-01-02-10-00 LVDT transmitter XCBSQ-02/250-01-22 Liquid LevelTransmitter with sensor GB-2100C Sensor DF311180-50-11-00 CLOSING/TRIP COIL ZN63(VS1)-12KV VCB OF 2000A, 210 Ohm LVDT Sensor TDZ-FRD-308 high pressure transmitter BH-209028-209 use of thermometer WSS-481 0ï½?150â?? �?8�?100 M27�?2 Electronic Module P223CB01BD5 TRANSMITTER 264DS.A.S.H.B.2.B.1.V1...L1.B1 CONTROLLER WIHT BODBUS TCP INTERFACE SPBRC410 Sensor DF311180-50-04-00 Displacement transmitter LTM-4-S2 analog pressure sensor BH-038013-03 High wear resistance thermal resistance WZPHAR2-02 Control board ME8.530.014 V2-5 Gap Sensor Cable GJCFB-15 Cable WT0182-A50-B00-C00 Blind-free two-color water meter B69H-32/2-W Embedded intermediate relay GZY-202/220V displacement measurement transducer LVDT TDZ-1-H 0-300 Oil pressure sensor 32302001001 Water Analyzer Transmitter CM442-45T 8/0 LVDT Sensor TD-1 300S LVDT Sensor TDZ-1E-45 CURRENT TRANSDUCER GPA ZYR-DFYL-2025-2-10
Nominal Current(RMS):50/100/200/300/400/600A Vout@Ipn:+_4.000V Measuring Range:0~+_900A Supply Voltage DC:+_12-15 Accurancy@Ipn,+25degree Celsius:less than +_1.0% Mounting(mm):10.5*20.5
Nominal Current(RMS):10/25/50/75A Vout@Ipn:2.500+_0.625V Measuring Range:0~+_150A Supply Voltage DC:+5V Accurancy@Ipn,+25degree Celsius:less than +_0.5% Mounting(mm):8.2 in diameter
Series: ce-ij03 Ce-ij03a(true rms) Input range: 0.5a~300a Output: 5v or 4-20 ma Accuracy: 0.2% or 0.5% Response time: 300 ms Power source: +12v or +15v or +24v Load capability: voltage outputú5ma Current outputú300w Quiescent power consumption: 200 mw L*w*h=83mm*36mm*56mm
CAS No. : 5026-62-0 Chemical Formula : C8H7O3 H.S.code : 291619 E No. : E218 Weâ??re Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China.Based on our 15 years in food additives & ingredients market, we have a knowledge of China market and manufacturers. We can help our abroad customers save time selecting good manufacturers and update the current market in China. Methyl p-hydroxybenzoate, E218, CAS No.5026-62-0, also called methyl paraben, is an organic compound manufactured through chemical synthesis, available as White crystalline powder used as antioxidants. Methyl P-Hydroxybenzoate is often used as an anti-fungal food preservative in chewing gum, dairy products, fat spreads, fruit products, etc. It can inhibit drosophilia growth in the larvae and pupae stages. As Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China, we supply Methyl p-hydroxybenzoate food grade FCC,USP,EP. Methyl p-hydroxybenzoate powder Specification ITEM STANDARD Appearance White crystalline powder Purity (on dry base)% 99 Melting point 125-128 Sulphated ash %
Attribute: 1.Input: DC 0~1mA...0~5A; 2.Output: DC(0)4-20mA 3.Accuracy : 0.5% 4.Input Impedance (R): Riï¼?0.05V/Ix (Ix is the current be measured) 5.Linear Range:0-120% of nominal input 6.Responding Time: 150ms 7.Over Load Capacity: 10 times of nominal input, for 5 seconds; 8.Maximum Load: 6V 9.Static current: 17mA 10.Auxiliary Power:+12Vdc +24Vdc 11.Isolation Voltage: â?¥2500Vdc, for 1 minute 12.Output Ripple: ï¼?10mV 13. Drifting by Temperature: 350Ã?10-6/ 14. Ambient Temperature: -10ï½?+50 15. Mounting : DIN Rail 35mm Mounting
Attribute: Rated input current 1mA, 5mA, 20mAâ?¦5A DC Output signals 0-5V, 0-10V DC Accuracy 0.2% Input Impedance (R) approximate zero Responding Time 350ms Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hzï½?5kHz Output impedance 6V Static current 10mA Power supply +12V, +24V DC Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute Output Ripple ï¼?6mV Thermal drift 200ppm/°C Ambient Temperature -25ï½?+50 Mounting DIN Rail 35mm Mounting or screw mounting Material of shell ABS (According to UL94V-0) Protection of shell IP20 Shell type without aperture MTBF >50000h Weight 90g
Attribute: Rated input current AC 30A, 50A, 100A, 150A, 200A, 250A, 300A, 350A, 400A AC Output signals 4-20mA DC Accuracy 0.5% Input Impedance (R) approximate zero Responding Time 300ms Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hzï½?5kHz Output impedance 6V Static current 3.3mA(0mA-20mA) 6.8mA(4mA-20mA) Power supply +12V/+24V DC Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute Output Ripple ï¼?6mV Thermal drift 350ppm/°C Ambient Temperature -10ï½?+50 Mounting DIN Rail 35mm Mounting or screw mounting Material of shell ABS (According to UL94V-0) Protection of shell IP20 Shell type with aperture Ф20mm MTBF >50000h Weight 120g
BMS500 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system). PHEV and EV system may use different technologies of batteries. One very important parameter that mayinfluence the stability of the SOC is the temperature. The battery temperature affects vehicle performance, reliability, safety and lift-cycle cost. The BMS500 series is qualified between -40 to 85 but the transducer shows a better accuracyinarestricted temperature range in order to deliver a very accuracy current measurement.
Current Transducer FPA-A1-P2-F1-03 hydraulic oil filter Dongfang Yoyik Engineering Co., Ltd provides professional spare parts of turbines, generators, and boilers for brands. Our primary business are EHC, TSI, MEH, DCS, excitation system, hydrogen oil water system, sealing compounds, and insulation materials. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-CURRENT TRANSDUCER FPA-A1-P2-F1-03-DF thermocouple thermometer WRNK2-291 mechanic seal water pump HZB253-H75/110-C115-E1 00 11 magnetic coupling centrifugal pump DFB80-520-240 Screw pump HSNH210-36N sealing ring HB4-56J8-146 shaft seal mechanical 8b1d hydraulic piston pump spare parts 80AY100A MECHNICAL TRIP DEVICE rotary vane pump F320V12A1C22R multi stage centrifugal pump CZ50-250C burgmann mechanical seal CM104-45 vacuum pump 228v 30-WS-COML electric motor centrifugal water pump DFB80-80-220-03 Sealing Oil Vacuum Pump Coupling Cushion M02225.OBGCC1 chemical pump centrifugal DFB80-80-240 thermocouple k WRNKD2-291 3 wire thermocouple TE-209Temperature sensor, Pt100 WZPM2-001 o-ring 315X3.55 vacuum pump 239v P-1607 ball valve MHARKH-22L-20-4465-PHPN350/DN20 centrifugal pump impeller ISG150-160 Platinum Thermocouple Wire WPNKZ-630 piston vacuum pump MCY14-1B Thermocouple Control TE-211 Piston Ring for Exhaust Check Valve FH-84-200-2 3 wire thermocouple TC03A2-KY-2B/SPG electric motor centrifugal water pump KQW100/200-22/2 Bladder NXQ-AB-80/10 FY thermocouple machine TE-105 dc centrifugal pump DFB80-80-220-03 piston pumps PV29/-2R5D-F00 Gasket Pos.85 metal spiral gasket thermowell flange WRN-230 mechanical seal types 1D56-H75/95-00 00 11 CURRENT TRANSDUCER FPA-A1-P2-F1-03 rotary vacuum pump 30-WS P-2811 vacum pump air vacuum M01225.0BGCC1D1.5A-100-5-1.5 heater thermocouple TC03A2-KY-2B/S20 Synchronous signal measuring card U12k type thermocouple W08B0691A mechanical seal for pump BKM(FX)103055 Magnetic Reed Switch Level Transmitter BS-950MM6/12 AI ADAM-5017S vacuum pump P-2037 centrifugal pump impeller CZ50-250C pump mechanical seal G50 oil transfer pump SDH150-125-400A piston pump hydraulic PVH74QIC-RSM-1S-10-C25-31 three screw pump KF80NZ/4.0F6 type k thermocouple TE-107 centrifugal water pump KSB65-250A reciprocating piston pump PVH74-Q1C-RSM-1S-11-C25-31 centrifugal pump vertical DFB100-65-230 Surface Thermocouple TE-110 reciprocating pump 125LY-35-4 screw pump diagram DLZB820-R64A-2 vacuum pump 229v PVH74QIC-RSM-IS-10-C25-31 hand valve J61Y-P54 100V DN20 Filter element LH0330DO20BN3HC pump screw HSNS440-46 Slot Wedge thermocouple types W08Q0019A thermocouple temperature sensor WRKK2-221 CURRENT TRANSDUCER FPA-A1-P2-F1-03 DFYL-2022-4-6-ZYR
This device is designed to monitor AC leakage current, then produce a standard signal such as 4- 20mADC, 0-5VDC and so on. It can be applied to arrester state detection, insulation of some electrical equipments and leakage current detection. High overload capacity: This device can accept heavy current input which is up to 2000A and work in high voltage environment; High stability: This device can effectively suppress the interference; High safety: Great surge protection capacity and 35KV isolation. Rated input: 0~0.5-100mA AC optional Output signal: 0-5V;0-20mA;4-20mA optional Power supply: +12VDC;+15VDC;+24VDC optional Accuracy: 1% Output ripple: 2kohm; Current Outputâ?¤250ohm Temperature drift: â?¤400/ppm Response time: â?¤300ms Operating temperature: -20~+70 Quiescent power consumption: 360mW(with +12VDC power) Window size :Ã?20mm
