Element Ac Analog Current Transducer

Attribute:
Rated input current AC 30A, 50A, 100A, 150A, 200A, 250A, 300A, 350A, 400A AC
Output signals 4-20mA DC
Accuracy 0.5%
Input Impedance (R) approximate zero
Responding Time 300ms
Linear measuring range 0 - 1.2 times of rated input current
Over Load Capacity 30 times of rated input current, 5s
Frequency range 25Hzï½?5kHz
Output impedance 6V
Static current 3.3mA(0mA-20mA)
6.8mA(4mA-20mA)
Power supply +12V/+24V DC
Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute
Output Ripple ï¼?6mV
Thermal drift 350ppm/°C
Ambient Temperature -10ï½?+50
Mounting DIN Rail 35mm Mounting or screw mounting
Material of shell ABS (According to UL94V-0)
Protection of shell IP20
Shell type with aperture Ф20mm
MTBF >50000h
Weight 120g

Function & Feature
1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise
measurement.
2. Current transducer converts an ac current input into a load independent output signal.
3. Excellent temperature characteristic and good working stability.
4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence
the transducer can be used with distorted waveforms.
5. The unit conforms to IEC 60688. In an addition it meets the insulation requirements of IEC 60255-5,
clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test
voltage.
Specifications
Inputs:
System current 1A, 5A, 10A, 30A
Absorbed power 0.3VA
Frequency range 50Hz, 60Hz
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Ripple

The CE-IJ03 1 element AC current transducer is designed to measure and monitor average RMS AC current, then produce a standard signal such as 4-20mADC, 0-5VDC and so on.







Rated input: 0-500AAC(average RMS current ; TRMS current optional)

Output signal: 0-5V;0-20mA;4-20mA;1-5V;4-20mA loop powered;0-10V; oc frequency(0-5kHZ,0-10KHZ)

Power supply: +12VDC;+15VDC;+24VDC, self power optional

Accuracy: 0.5% optional

Output ripple: 15mV

Isolation: 2500V DC

Load resistance: Voltage Output >2kohm; Current Output=250ohm

Overload capacity: 20 times or

This device is designed to monitor AC leakage current, then produce a standard signal such as 4- 20mADC, 0-5VDC and so on. It can be applied to arrester state detection, insulation of some electrical equipments and leakage current detection.



High overload capacity: This device can accept heavy current input which is up to 2000A and work in high voltage environment;

High stability: This device can effectively suppress the interference;

High safety: Great surge protection capacity and 35KV isolation.







Rated input: 0~0.5-100mA AC optional

Output signal: 0-5V;0-20mA;4-20mA optional

Power supply: +12VDC;+15VDC;+24VDC optional

Accuracy: 1%

Output ripple: 2kohm; Current Outputâ?¤250ohm

Temperature drift: â?¤400/ppm

Response time: â?¤300ms

Operating temperature: -20~+70

Quiescent power consumption: 360mW(with +12VDC power)

Window size :Ã?20mm

We are a leading manufacturer of high-performance sensors engineered to deliver accuracy, reliability, and innovation across industries. With 30 years of expertise in advanced sensing technology, we design and produce cutting-edge solutions that empower automation, IoT, and smart systems worldwide.

CURRENT TRASDUCER GPA
Deyang YOYIK have power plant professional accessories, non-standard pieces, to spare parts for processing. Only need to figure the number of other companies need drawings and drawings number. If you have any questions or concerns, please contact us. YOYIK has a good talent pool, the company is developing, you need to support, in order to witness its growth.

Yoyik can offer many spare parts for power plants as below:

#DF-CURRENT TRASDUCER GPA-DF
Magnetic Resistance Speed Sensor CS-1-G-065-06-01
LVDT 3000TDGN-40-01
Steam turbine bolt electric heating rod ZJ-17-13
HP CASE EXPANSION SENSOR TD-2-25
Digital temperature measuring instrument 3T-1
Bolt electric heating rod ZJ-22-14
LVDT Sensor 4000TD-15-01
Eddy Current Sensor PR6426/010-141
Hydrogen leakage detection device probe LH1500-B
FOXBORO FBM214
Eddy Current Sensor PR6422/001-001
VELOCITY SEISMOPROBE 9200-01-02-10-00
LVDT transmitter XCBSQ-02/250-01-22
Liquid LevelTransmitter with sensor GB-2100C
Sensor DF311180-50-11-00
CLOSING/TRIP COIL ZN63(VS1)-12KV VCB OF 2000A, 210 Ohm
LVDT Sensor TDZ-FRD-308
high pressure transmitter BH-209028-209
use of thermometer WSS-481 0ï½?150â?? �?8�?100 M27�?2
Electronic Module P223CB01BD5
TRANSMITTER 264DS.A.S.H.B.2.B.1.V1...L1.B1
CONTROLLER WIHT BODBUS TCP INTERFACE SPBRC410
Sensor DF311180-50-04-00
Displacement transmitter LTM-4-S2
analog pressure sensor BH-038013-03
High wear resistance thermal resistance WZPHAR2-02
Control board ME8.530.014 V2-5
Gap Sensor Cable GJCFB-15
Cable WT0182-A50-B00-C00
Blind-free two-color water meter B69H-32/2-W
Embedded intermediate relay GZY-202/220V
displacement measurement transducer LVDT TDZ-1-H 0-300
Oil pressure sensor 32302001001
Water Analyzer Transmitter CM442-45T 8/0
LVDT Sensor TD-1 300S
LVDT Sensor TDZ-1E-45
CURRENT TRANSDUCER GPA

ZYR-DFYL-2025-2-10

PE coil pipes and tubes for water and wire cable conduit PL231


The PE coil pipes and tubes can be used:

water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm


We use new 100% pure raw PE material


WHY NEW MATERIAL HDPE PIPES?

1. Health performance

PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.

2. Corrosion resistance

It can resist various chemical media erosion, with no electrochemical corrosion.

3. Service life

Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.

4. Impact resistance

PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.

5. Connection performance

The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.

6. Construction performance

It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.

Nominal Current(RMS):50/100/200/300/400/600A
Vout@Ipn:+_4.000V
Measuring Range:0~+_900A
Supply Voltage DC:+_12-15
Accurancy@Ipn,+25degree Celsius:less than +_1.0%
Mounting(mm):10.5*20.5