MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
Our SPQ-10 has air conditioning water cooling system.
SPQ-06 has water cooling system.
SPQ-1.5 has air cooling system and special for 4S car shop.
Specification:
SPQ-1.5 Dimension300mm*300mm*220mm
Input Voltage2phases 220V
Output Power1.5KW
Tube Length6m
Cooling SystemWater cooled
Weight12kg
Model
SpecificationSPQ-06
Input Voltage1 Phrase 220V/50~60HZ
Input Power 6KW
Water Pump Power0.33KW
Load duration rate60%
Host Volume900mmX830mmX590mm
Weight120KG
Hand lead line /weight¦µ5.5X20CM/2KG
Hand lead line extension6M
Water Tank 25L
Cooling systemAir Condition Water cooled
Circulation Period>60Mins
1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more.
2.Flameless heat reduces the need for torches, solvents and abrasives.
3.Less flame and solvents reduces potential safety hazards and insurance rates.
4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas.
5.Wide range of heating inductors for increased versatility.
6.Easy-to-read heat output meter to quickly verify induction heat.
7.Output isolation transformer provides the safest possible operation.
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
SPQ-1.5 has air cooling system and special for 4S car shop.
SPQ-06 has water cooling system.
Our SPQ-10 has air conditioning water cooling system.
It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process.
The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs.
SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.
Recently we developed a very compact model suitable for all the Induction applications like... Heating, Hardening, Brazing, Melting, Annealing and Shrink Fitting.
Operator controls Easy to operate, no need for skilled operator, Durable and compact design, loaded with safety features, Low maintenance, easy to install and move.
Adopts the latest IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output.
Constant current and power control function providing higher reliability, sustainability and increased productivity.
Hassle-free maintenance and minimal downtime.
Advanced controls with diagnostic features. Improved production values through higher melting rates with homogeneous Melting due to auto stirring technology.
Product Details:
Minimum Order Quantity :2 Piece
Capacity :3kw
Brand :FOSTER
Heater Material :Metal
So far forever has already had many sucessful cases for aluminum bill induction heater, such as diameter 90mm aluminum bill induction heater,
Aluminum bill induction heater features
1.aluminum bar diam diameter10-300mm
2.length: not limited
3.pow100-8000kw
4. temperaturte control: closed loop temperature control system, which can adjust the temperature automatically.
5. heating temperature:450-500 degree C.
6. heating way: magnic induction heating
Aluminum bill induction heater advantage,
1).,full power output
2).,equipment has features of easy operating, reliability, light weight, and no risk from high pressure.,
3).,installation is simple, just need to connect power and power, a few minutes to comple.,
4).support 24 hours of continuous use, high efficiency and energy saving.
5).high induction heating speed, high efficiency and uniform heating, so there is no lack of welding and solder leakage.,
6).oxidation area is small, after welding, the bar is beautiful, firm and durable
Welcome your inquiry for forever aluminum bill induction heater
-
12916 Induction Heater Suppliers
Short on time? Let Induction Heater sellers contact you.
eating machine features:
1.Based on eldctromagnetic principle,the machine can penetrate nonmetal materials,while heating meta materials instantly.
2.IGBT,MOSFET power accessories made by SEIMENS are adopted,which is unique in AC control
3.Environmental friendly products,which does not produce disturbance to comnunication,and output voltage is 36V,which is safe and power saving.
4.Easy to opearte,it only take a few minutes to learn to operate the machine,and it can run continuouslly in 24hours.
5.A level of 1000Degrees Celsius can be reached in a few seconds,it is capable of automatic and manual type with control of output power and time control.
6.It is equiped with automatic protedition circuit,for instance,over voltage,over current,water. shortage,and lack of any of the items above wil cause the machine to pause automatically.
So far Forever has already had many sucessful cases for billet induction heater, such as 75*75 billet induction heater, 100*100 billet induction heater, ø130*130 billet induction heater, 150*150 billet induction heater etc.
1.High efficiency
2.Proven Design
3.Reduced customer start up time
4. Forge shop proven
5.Excellent customer reference list
6.Advanced PLC control, power & temperature control
7.Quick release connections for both power & water
8.World wide customer service support
9.Reliable
10.Heavy Duty Construction, for toughest forging conditions
11.IGBT (Insulated Gate Bi-Polar Transistor) Design
So far forever has already had many sucessful cases for induction billet heater, such as round billet induction billet heater, square billet induction billet heater, aluminum billet induction billet heater for extrusion, plate induction billet heater etc.
Induction billet heater advantages
1. Igbt invertor technology better than scr technology;
2. Heating rapidly, heating evenly, no oxide layer;
3. Energy saving 15%-30% , compared to scr technology
4. High power factor over 0.95
5. High efficiency over 90%
6. Duty cycle 100%
7. Be started up 100% at any load and any time
8. Light weight, small size, easy to move and operate.
Service:
A. Experienced sales offer the most intimate and professional sevice, according to yuor requirement, offer the suitable equipment for you.
B. Engineer offer the long-terms technological skills, let you not doubt how to operate and install the machine.
C. 12months warranty, offer workpieces free of charge during the period.
General Description
1.PDR (Paintless Dent Removal) Series Hotbox Magnetic Induction Dent Removal System, can remove the small Dents, Door Dings and Other Minor Soft Dents on vehicles quickly and cleanly, which has a digital screen and relative control for both time and power settings.
2.No need additional and extra material,Induction Dent Removal System will remove a variety of soft and small dents easily by flameless heating the panel behind the paint from the outside of the panel, relieving the stress holding the dent and lifting the dent through induction thermal expansion, especially in hard-to-reach areas, or areas difficult to get behind.
3.It is one kind of fast, convenient and professional tool specially designed for professional PDR vehicles body shop workers, which can save time during a repair process.
4.Therefore the Induction Dent Removal System is the profitable choice for Auto Body Repairing Shop to remove the softer dent.
Induction brazing
Induction technology has proven valuable in brazing processes for many reasons. First of all, the fast advance and precise thermal control allow local heating of components without significantly changing the material properties. In addition, it allows brazing of materials such as aluminum, as well as sequential, multi-alloy brazing, and the welding of close joints.
Induction brazing is versatile and suitable for unique production lines. Thanks to our modular design concept, our equipment can be strategically placed for your facility. Induction brazing equipment simplifies the process of fixing parts, thus freeing the operator's hands and extending the life of the equipment.
Induction brazing equipment for a wide range of applications
Induction welding and brazing involves introducing an electromagnetic field into a metal body to heat the joint between components and melt the alloy at a temperature lower than the component's melting temperature. Induction welding and brazing machines form higher quality, gas-tight and watertight joints with less oxidation and cleaning than joints made using flame heating techniques.
1.Adopted European MOSFET,IGBT solid power module and advanced resonance inverter technology,high efficiency,big output power and energy saving;
2.The digital phase-locked technology achieve frequency trucking automatically,optimization of metal heating process,ensure high efficiency and high speed heating;
3.100% full duty cycle,can work for 24hours continuously.Can control the heating temperature remotely and automatically by extra Infrared Thermometer,improve the heating quality and reduce human operation;
4.Perfect protecting functions,include over-current, over voltage, water shortage, lack of phase and other fault state self-protected and display,also some other necessary functions which will ensure our heaters higher reliability and durability;
5.The time of three stages:Heating,Maintain Temperature,Cooling can be adjusted separately. Furthermore,the function of adjusting the power of Maintain Temperature independently will be effective to control the heating curve and the heating temperature,suitable for workpiece of mass production,repeatability,rapid heating.when used in brazing,adopt combination of rapid heating and maintain temperature,not only heating fast,also solder spread out fully;
6.Easily operate and the output voltage is safe for operator.
The DIH-1.5KW Induction Heater is designed for quick, efficient and safe heating of metallic parts. Can work with any power source with single phase 110V, 220V or 240V, simple operation and very convenient.
Main Descriptions and Advantages
Max output 1.5KW, heating steel material more than 800 C temperature within seconds and no need water cooling, and lower consumable cost, with the less weight, easy handling and small carrying handle, one better kind of portable induction heater, no flame, compare to naked fire or LGP flame heating way in the auto repairing workshop, a better way to heat the metallic material, such as bolts, nuts, screws, gears, rod, cases, bearings, driving shafts, pipes, hubs etc.
Main Application
Manufacture, repair renovation, maintenance,and so on.
Heating of tools and parts before hardening, gluing, soldering.
Also the workpieces and parts that require heating, such as bolts, rod and profile steel, metallic sheets, bearings, cases, driving shafts, suspensions, nuts, pipes, gears, gear, spring base, shafts, machine and vehicle parts and components, exhausts, pulley boxes, bushings etc.
Main Technical Parameter
Model No. DIH-1500W
Input Power Supply AC 110V,220V,240V,50/60Hz
Output Induction Frequency 25-65kHz
Max Output Power 1.5kW
Power Factor 0.99(PFC)
Cooling Way Air Cooling
Continuous and Constant Heating Time 6Minutes
Plug Cable Length 150CM
Output Induction Cable Length 80CM
Induction Coils Diameter & Quantity 4PCS Different Diameter
Plug Type Type H,Type B,Type G,Type E
Induction Main Part Net Weight 2.7KG
Dimension 21 9 14CM
Induction Heads Part Net Weight 0.5KG
Dimension 19 17 6.5CM
Total Packing Weight 4.6KG
Total Packing Size 41 32 12CM
Power: 2.0
Voltage and current: 220v/9a
Adaptation bearing diameter: >15
Largest bearing diameter:200
Maximum bearing width: 110
Maximum load-bearing: 25kg
Heating configuration: 10
Power: 2.0
Voltage and current: 220v/9a
Adaptation bearing diameter: >15
Largest bearing diameter: 400
Maximum bearing width: 140
Maximum load-bearing: 25
Heating configuration: 10
Power: 5.0
Voltage and current: 380v/13a
Adaptation bearing diameter: >30
Largest bearing diameter: 500
Maximum bearing width: 140
Maximum load-bearing: 65
Heating configuration: 20.30.40.60
Heaters for fryers, heaters for grills and tilting frying pans, heaters for ovens, heaters for coffee machines, heaters for dishwashers, heaters for boilers, tanks and Bain-maries, heaters for dryers, heaters for pancake plates, heaters for bread and pizza ovens and heaters for other catering and bakery equipment.
12916 Induction Heater Suppliers
Short on time? Let Induction Heater sellers contact you.
