Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm
Fiber Optic Patch Codes
Fiber Optic Cables
Marble, granite, stones, slates, tiles, power cord, wires, cables , cable assemblies, tyre scrap, used tyres, steel tire wire scrap, firewoods, pistachios, hazelnuts, textiles.
Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km
Technical parameter 1. According with ieee802.3ab/z, ieee802.3u, ieee802.3x, ieee802.1q, 10base- t, 100b ase-tx, 1000base-tx, 1000base-sx, 1000base-lx standard. 2. Support tcp/ip, pppoe, dhcp, icmp, nat protocol. 3. Flow control: full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4. Eletricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port support auto-mdi/mdix automatic reverse. 6. Support storage transmit mode, cache capability is 256k. 7. Support electricity port 1000m mode and self-adapt mode's switch. 8. Afford the state indicator, external power(output 5v~50hz 1a). 9. Interface: electric port: rj-45 fiber port: sc 10. Twisted-pair: cat. 5 cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0 ~ 50degree 13. Storage temperature: -20 ~ 70degree 14. Humidity: 5% ~ 90%(noncondensing) 15. Size: 118mm*86mm*27mm(l*w*h) Specification Connect type: sc/fc/st Fiber type: singlemode Wavelength: 1310nm Typical distance: 40km Min tx pwr: -6.0dbm Max tx pwr: 0.0dbm Sensitivity: < -24dbm Link budget: 18.0dbm 0.5kg/pcs
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM
We are supplier and exporter of Kaolin Ore. Features Of Meta Kaolin Metakaolin is form of calcined or dehydroxilated china clay. During calcination morphological, mineralogical and chemical changes occur which result in products with excellent optical properties. Applications Ceramics Glass Paper Cosmetics. Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing.
Technical parameter 1. According with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE802.3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is 256K. 7. Support electricity port's 1000M mode or self-adapt mode's switch. 8. Support state indicator, external power(output 5V~50Hz 1A) 9. Interface: Electricity port: RJ-45 fiber: SC 10. Twisted-pair: Cat. 5 Cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0~50 degree 13. Storage temperature: -20~70 degree 14. Humidity: 5%~90% 15. Size: 32*128*158mm (H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelength: 1310/1550nm Typical distance: 20KM Min TX PWR: -6.0dBm Max TX PWR: 0.0dBm Sensitivity: < -22dBm Link budget: 16.0dBm Size: 32*128*158mm (H*W*L) 1KG/pair
Lan cable, optic fiber cable, power cable, other chemical.
PRODUCT INFO Garden peas have a large bright green pod which encases plump, round peas or berries. The pods grow on vines and unlike snow and sugar snap peas are too fibrous to be edible. Pods must be shelled first by snapping off the end and pulling the fibrous string along the length of the pod. Each pod contains five to eight emerald hued peas. Peas have a tender yet slightly crunchy texture and a sweet pea flavor. For best flavor prepare or freeze peas soon after they are harvested, the high sugar content of the peas begin to convert to starch as soon as the peas are picked from the vine.Fresh garden peas are rich in vitamin A and vitamin B (particularly folic acid), calcium, iron, zinc, and potassium. In addition they contain protein and fiber as well as lutein which has been shown to promote healthy vision. They also contain phytonutrients which have anti-inflammatory properties and can aid in the prevention of diabetes, heart disease and arthritis. To best preserve nutrients use peas raw or prepare steamed or stir-fried. USES A versatile vegetable, fresh garden peas are sweet and tender enough to be eaten raw but may also be prepared cooked. Shelled peas can be blanched and pureed to make a spread or dip. Add raw peas to green and grain salads. Their sweet, fresh flavor will complement rich pasta and risotto as well as spicy curries and soups. The shells of garden peas can be used to add flavor to vegetable stock. For best flavor and texture wait to shell peas till you are ready to use them. Peas can also be shelled and frozen, dried or canned for future use. Season A peak season in spring through early summer, garden pea are available year-round with sporadic gaps in availability throughout the year.
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type Specifications: Interface: Left side: One 10gbps rj-45 port One 10gbps sfp + port (mini-gbic) Right side: One rs-232 console port (rj-45 connector) One power jack Wire speed cable length: up to 100m cat6a cable for wire speed transmission Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r Temperature:
Main features In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm Half duplex: back pressure flow control Full duplex: IEEE802.3x flow control Automatic identification of MDI/MDI-X cross line Technical parameter: Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard Connector: one UTPRJ-45 connector, one SC/ST connector Operation mode: full duplex mode or half duplex mode Power supply parameter: Adapter(External): 110-265V AC input, 5V1A DC output Power(Internal): 110-265V AC input, 5V1A DC output Environmental temperature: 0 - 50 Relative humidity: 5%-90% TP cable: Cat5 UTP cable Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140ª¦m single mode: 8.3/125, 8.7/125, 9/125 or 10/125 Dimensions: Power external: 94mm(L)x 71mm(W) x 26mm(H) Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Submarine communications and telecommunication.
Product name: 10/100m fiber media converter Dual fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply Features Supports auto MDI/MDIX crossover 1K MAC address can be storage, and automatic updated Supports 10/100M, full/half duplex auto- negotiation Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard More than 50,000 hours MTBF Supports over-sized packets up to 1600Bytes Full duplex-flow control, Half duplex-back pressure Link fault pass through function Full-positioned LEDs to indicate power and network status Same card on rack mounted and desktop FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark Throughput @ 100Base: 148,800 pps (64-byte packets) Multimode or Singlemode; single fiber or dual fiber optional Transmission distance is from 2KM up to 120KM Network broadcast storm protection function High quality optical modules and chips with working stability Specification Standard IEEE802.3 (10BASE-T) IEEE802.3u 100BASE-TX/FX (Fast-Ethernet) IEEE802.3x (Flow Control) IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree Fiber Connector SC standard, ST/FC/LCoptional 10/100BASE-T STP or UTP Category 5/5e/6 cable (Max. 100m) 100BASE-FX 50/125um, 62.5/125um multimode fiber cable (2Km) 9/125um singlemode fiber cable (20/40/60/80/100/120Km) Conversion Mode / Delay Time Store-and-Forward < 10us, straight-through
