RE-BAR Couplers (100% Make in India Product) are a mechanical splicing system for the connection of Reinforcement Bars from12 mm to 50 mm Diameter. Classification of our RE-BAR Couplers: o Provides Continuity of TMT Bars. o Allows full ductile elongation of TMT Bars. o NO Reduction of TMT Bar Cross sectional area. o Full Tension Splicing. Bar Break under tensile load. o Trustworthy alternative to lap splicing. o Solves bar congestion problems. o Reduces steels wastages. o Shortens Construction cycle time. o Easy Installation. o 100% traceability of materials origin & production lots. o Each joint with JB RE-BAR coupler is stronger by125% & above of TMT Bars. These are 100% indigenous products manufactured in compliance with BIS-16172: 2014: IS1608, IS 1786; IS 456-2000, ACI-318, BS-8110-1, ASTM A-1034/A1034M, which meets the international Standards.
Rebar Steel, Deformed Steel Rebar Iron Rods for Construction Concrete Rebar steel deformed steel rebar iron rods for construction concrete building Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:HRB335,HRB400 Diameter:5.5-250mm Length:6-12m Place of Origin: Thailand Model Number:Q235 Steel grade:ASTM, Q235,SAE1018,SAE1045,20#,45# etc Technique:Cold Drawn or Hot rolled available Surface:HRB400/500/ASTM/BS4449
Khakhi cambell duck chiks form duck farming
Glass fiber rebar or GFRP is a new kind of composite material which is used as reinforcement materials that combines with epoxy resin and curing agent then through pultrusion molding process. Products Feature: 1. High Corrosion Resistance:The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials; 2. High Tensile Strength:The load is approximately double that of a steel bar with the same diameter; 3. Low weight-The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time 5. Anti-static-It has no electrical conductivity, and no sparks will be produced when being cut, it's particularly suitable for high gas zones; 6. Non-flammable-It's non-flammable and has high thermal isolation; 7. Culpability-It avoids damages to cutter heads, and does not delay excavation 8. Save cost-Use this material as reinforcing bars for road and bridge, could reduce secondary repair cost. Material: 100% glass fiber and epoxy Surface: all thread Diameter: 3-40 mm Tensile strength: 780-1200Mpa Density: 1.9-2.1 g/cm3 E-Modulus: >45 gpa
Not to be used for rebar impalement prevention. Highly visible orange increases worker visibility of rebar runs. Provides some protection from scratches of rebar termination points. Reusable Excellent marking tool for all rebar work Can be used for landscape, survey and stake marking Numerous other uses
High Strength BFRP Basalt Fiber Rebar Pultrusion Rebar Rods for Construction Engineering Diameter 3-40mm Basalt fiber reinforcement polymer (BFRP), also called Fiber Reinforce Plastic, is a new kind of composite material which basalt fiber comnbines with epoxy resin andcuring agent. BFRP Rebar is a kind of rustless electrical insulator, with non-magnetic, especially with great acid resistance and alkali resistance. It could develop the durability of construction. With light weight property, its density is about 1.9-2.1g/cm3, about 1/4 of steel. Technical Index of BFRP Rebar Diameter(mm) Ultimate Tensile Load (KN) Crosssection (mm2) Ultimate Tensile Strength (Mpa) E-modulus (Gpa) Ultimate Shear Strength (Mpa) Weight(g/m) 6 28 28 1000 >50 >150 56 8 51 50.3 1000 108 10 79 78.5 1000 166 12 113 113 1000 245 14 108 133 810 285 16 142 177 800 373 18 182 227 800 470 20 228 284 800 570 22 277 346 800 720 25 362 452 800 1050 Main Features of BFRP Rebar: Non magnetic, Electric insulation, High strength, High E-modulus, Coefficient of thermal expansion near with cement concrete. High resistance to corrosion, acid, alkali and salt. Application: Earthquake observing station, Metro station,bridge, Seaport pier protection engineering and construction, Non magnetic or magnetic concrete construction, Prestressed concrete highway, Anti-corrosion chemical industry, Chemical storage tank, Underground engineering, MRI(magnetic resonance imaging) facilities basis, Communication building, Electronic equipment factory, Fusion buildings, Concrete guide board of Maglev railway, Telecommunications transmission tower, Television stents and strengthen core of Optical fiber cable.
All products offered by our company have the best quality and price. These export products are produced and distributed from prominent Iranian factories such as Isfahan and Khorasan factories. We are able to supply your product from your desired factory in India.
In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel. Most of the steel mills production complies with the Russian standard which is divided into three types of A-1, A-2 and A-3 steel. The A-1 grade is of a flat type. The yield strength and tensile strength (rupture stress) are 2400 and 3600 kg / cm2, respectively. The A-2 grade is of an indented bar type with the yield strength of 3400 and a tensile strength of 5000 kg/cm2. The A-3 grade is also of an indented bar type with a yield tolerance of 4000 and a tensile strength of 6000 kg/cm2. Arij Global Trading, with years of experience in supplying steel products, supplies the best quality of Rebar according to the world standard properties.
Cut to length TMT as per specific requirement of Customer. Cut and bend of TMT in any shape with numerical control.
Features HGQ40 steel bar cutter adopts enclosed housing, lubricate system, dual-mass flywheel and with clutch structure. It works with high efficiency and safety, which is easy to operation and maintain, light in weight and energy saving. Double Mass Flywheel, which assure strong enough power for cutting.
This machine is also used to connect rebar by coupler. It adopt another method. First to peel rib of the rebar, second make thread by rolling. Rebar Rolling Machine Capacity: Â 16mm-Â 40mm Thread Length: 100mm (The thread length can be customized) Oil Pump Flow: 15L/min Rated Pressure 31.5MPa Cylinder Work Stroke: 150mm Spindle Speed 62-85r/min Power: 380V/7.5KW Weight: 400kg
Model GD-150 Dia. of Upsetting Rebar 16-40mm Oil Pressure Flux 5.6L/min Max Pressure 63 Mpa Voltage 380V 50Hz Power 4kw Net Weight 620kgs Dimension 1225*570*1100mm
We are an Accredited Manufacturers of "HES" Parallel Threaded Rebar couplers in compliance with BS 8110, BS 5900, ACI 318 and BIS 16172:2014 codal specifications. We have a huge clientelle across India and Global for many Renouned Projects.
[CERTIFIED TECHNOLOGY] With proven technology from ICC-ES 4336 Evaluation, our One-Touch rebar coupler is designed for workers to connect rebars in 3 seconds without any additional tool and skilled labor. We can realize saving costs and reducing construction period. [BENEFITS] - Satisfy seismic application design conditions - Reduce rebar loss, times and costs. (ex. Based on 200,000EA installation and 2020 cost of labor in korea, We can save about minimum $609,270 to maximum $1,451,214) - Ensuring worker stabiliy (ex. Reduced rebar lifting equipment operation time, tool drop) - No additional tool and professional knowledge needed to connect rebar
Rebar bending hoop machine belongs to an improvement of the structure of steel bar bending machine. The utility model includes a reducer, a large gear, a small gear, and a curved disc surface, which is characterized by the structure: a two-stage brake motor and a reducer are directly connected to perform a first-stage deceleration; The curved disc surface is always driven to rotate; the central axis hole and several curved axis holes are provided on the curved disc surface; the positioning square bars on the worktable surface are respectively provided with several positioning axis holes. Because the two-stage brake motor and the reducer are directly connected for one-stage deceleration, the input and output revolution ratios are accurate, the bending speed is stable and accurate, and the automatic conversion speed can be controlled by electric, and the brake can ensure the bending angle. Using the positive and negative rotation of the motor, the rebar is bent in two directions. The central axis can be replaced for easy maintenance. Intelligent control can be used. 1. Straightening system: the multi-wheel group straightening machine structure is adopted, which is straightened by two sets of horizontal and vertical multi-wheel straightening. The straightening system has position mobile memory detection. Replacing different diameter steel bars, the straightening wheel will automatically go down or up Adjustment to achieve rapid steel bar straightening (patented technology), shorten the steel bar straightening time, the entire process is automatically completed, multi-wheel group synchronously draws the steel bar, the pressure between the wheel and the steel bar is reduced, and the traction force is small, thereby causing energy consumption and steel bar loss cut back. 2. Cut-off system: Cut-off is equipped with brakeless brake control device (this device is our company's invention patent), which supports high-speed frequent start-up shear, which greatly improves the reliability and durability. 3. Bending system: driven by imported servo motor, the bending arm can be quickly rotated and telescopic, from eccentric shaft type to straight reciprocating structure, eliminating eccentric loss parts. 4. Control system: adopt advanced PLC program control, color touch screen display, key input to reduce the damage to the touch screen due to poor environment. Built-in a variety of different shapes of stirrup graphics, the key parts are imported brand-name products, with fault recognition and alarm functions. 5. Operation console: The operation panel of the new model is integrated with the main unit, and can be moved from side to side, effectively avoiding the defects such as large occupation of the operation console and unsafe control cables exposed on the ground. contact
The CNC vertical steel bar bending center adopts an integrated design. One cycle can bend multiple angles and high-strength automatic feeding racks. It realizes a large flexible tightening mechanism for carrying raw materials, which can ensure the forming accuracy of parts. Bending learning is easy to use and can be learned in 1 hour. The CNC vertical steel bar bending center is controlled by an industrial computer, the processing angle is accurate to 1�°, and the fixed length is accurate to 1mm. 1. This machine integrates straightening and cutting. All-in-one hook machine, computer numerical control input, all steel bars with hooks at both ends can be formed at one time, and the hook angle can be adjusted 90 degrees, 135 degrees and 180 degrees; the hook length is 5/7/10 /15cm adjustable; the length of the bent steel bar is from the shortest 0.16M to the longest 9M. 2. In addition to the one-time forming hook, this machine can also be used as a high-performance straightening and cutting machine with a straightening and cutting speed of up to 50 m/min. 3. This robotic design is very simple to use. A worker who does not understand machinery can learn to operate in 10 minutes. The original steel bar worker is fully competent. 4. Simple machine design, low failure rate, easy maintenance and low maintenance cost. 5. Using touch screen PLC programmable controller programming, as long as you enter the product size can be produced, can store 20 batches, automatically straighten the feed, automatically cut off, automatically hook. 6. Simple design, simple operation, full Chinese menu display, anyone who knows the straightener can learn immediately and teach in three minutes
Material:45# carbon steel/45Cr Thread angel: 60°/75° Thread Pitch: 2.0P 2.5P, 3.0P, 3.5P Fit For Rebar Diameter: 16-40mm
Material:45# carbon steel/45Cr Thread angel: 60°/75° Thread Pitch: 2.0P 2.5P, 3.0P, 3.5P Fit For Rebar Diameter: 16-40mm
Long Steel Rebar Most common size table Diameter (mm) : 10 - 51 Length (m) : Up to 12 Standard : ASTM, JIS, BS, TCVN, EN
1. Use solid 45# carbon or 40Cr steel as raw material. 2. Tensile Strenth is more than 540MPa, 630MPa and 720MPa. The standard rebar threaded coupler is suitable for connecting two bars of the same diameter, where one bar can be rotated. It comprises an internally threaded sleeve with two right hand threads which are tapered towards the middle of the coupler. The bar ends are square cut and thread is onto the bar. A nominal allowance of +25mm should be allowed per threaded bar end for square cutting the bar end. The couplers are generally torqued onto the reinforcing bar in the bar threading shop, the internal threads protected by plastic end caps. The threaded ends of the continuation bar are protected by plastic thread protectors.
