The CNC vertical steel bar bending center adopts an integrated design. One cycle can bend multiple angles and high-strength automatic feeding racks. It realizes a large flexible tightening mechanism for carrying raw materials, which can ensure the forming accuracy of parts. Bending learning is easy to use and can be learned in 1 hour. The CNC vertical steel bar bending center is controlled by an industrial computer, the processing angle is accurate to 1�°, and the fixed length is accurate to 1mm.
1. This machine integrates straightening and cutting. All-in-one hook machine, computer numerical control input, all steel bars with hooks at both ends can be formed at one time, and the hook angle can be adjusted 90 degrees, 135 degrees and 180 degrees; the hook length is 5/7/10 /15cm adjustable; the length of the bent steel bar is from the shortest 0.16M to the longest 9M.
2. In addition to the one-time forming hook, this machine can also be used as a high-performance straightening and cutting machine with a straightening and cutting speed of up to 50 m/min.
3. This robotic design is very simple to use. A worker who does not understand machinery can learn to operate in 10 minutes. The original steel bar worker is fully competent.
4. Simple machine design, low failure rate, easy maintenance and low maintenance cost.
5. Using touch screen PLC programmable controller programming, as long as you enter the product size can be produced, can store 20 batches, automatically straighten the feed, automatically cut off, automatically hook.
6. Simple design, simple operation, full Chinese menu display, anyone who knows the straightener can learn immediately and teach in three minutes
Long Pun rebar bending machine is manufactured and modified in Singapore. This machine is powered either by diesel engine/motor. It is easy to operate, can be manually adjusted to bend from 0 to 180 degrees. Product has gone through extensive redesigning and modification and is built to last. Safety features will all be included and assembled before delivery Machine comes with a 1 year warranty from manufacturer defect.
china coal 0001 Features of XTGWH20/32 Rebar Bending Machine 1.Adopt double drive wheel transmission structure, one time molding. 2.Easy to operate and use, Accurate arc and high efficiency. 3.Working wheels adopt high tough material, hard and durable. 4.Transmission gears adopt high tough material and have a long service life. Parameter of XTGWH20/32 Rebar Bending Machine Range of production 20mm-32mm diameter steel bar Motor power 3 KW Rated voltage 380V 50HZ Min.diameter of bending 350 mm Max.diameter of bending Unlimited Speed of bending 20 m/min
china coal 0001 Introduction of XTLSW12-32 CNC Rebar Bending Machine 1.The cnc rebar bending machine Using imported PLC and touch screen operation, the operation is simple and clear. 2. the use of retractable bending axis, bi-directional bending, improve work efficiency. 3. Double heads work at the same time, graphics can be freely edited. 4. can bend multiple steel bars at the same time, greatly improving the production efficiency. 5. Use high-strength moving track, durable. 6. The control system uses: PLC, touch screen, imported servo control system. 7. The use of racks for the nose walking reduces the length of the Ningyou durability. Parameter of XTLSW12-32 CNC Rebar Bending Machine model XTLSW12-32 form Vertica Number of bending machine heads two Dimensions 13000*2200*2000mm Rebar diameter range 12-32mm Accuracy plus or minus 1mm Largest curved edge size 12m Minimum curved edge size 100mm Bend angle range 1-200 Shortest bending length 500 Can bi-directional bending Bidirectional bending Processing capacity Adjustable speed
CNC Stirrup Bender can fully suit to bend various diameters of stirrup, it is manufactured from Qingdao Dongfeihong Intelligent Technology Co., Ltd. Our company imported advanced technology and research to design this machine. The machine is professional for bending two steel bars at the same time. Our CNC stirrup bender is a fully automatic stirrup processing equipment which integrates straightening, bending and cutting etc. The CNC stirrup bender adopts servo motor and top brand PLC intelligent control, can effectively bend steel bar precisely. It also saves workers just with one or two on site.
china coal 0001 Introduction Of XTSDC16-32 CNC Rebar Upsetter The CNC Rebar Upsetter adopts the normal temperature extrusion deformation process. In order to increase the tensile strength of the steel bar, the steel bar is squeezed and thickened at the wire cutting position without destroying the mechanical properties of the steel ba. The machine has a compact structure and the cr No. 2 steel, sliding positioning between the two clips and with a spring return function, to ensure the coaxiality of the Upsetter part and the base metal, and improve work efficiency. I use touch screen operation, pic control, extrusion time adjustment can be adjusted on the touch screen according to the diameter of the ba, no need to open the control cabinet, with a counting function, input output, after the target is reached to stop. It is the only CNC Upsetter that adopts pic control in China. Parameter Of XTSDC16-32 CNC Rebar Upsetter Production Range 16-32mmRebar Hydraulic Flow 4.0L/min Hydraulic Pressure Rating 40Mpa Motor Power 4.0kw Rated Voltage/Frequency 380V/50Hz Dimensions 1500x700x1500mm Hydraulic Cylinder Diameter 250mm Control Form Touch Screen Operation, PLC Control
CNC Stirrup Bender can fully suit to bend various diameters of stirrup, it is manufactured from Qingdao Dongfeihong Intelligent Technology Co., Ltd. Our company imported advanced technology and research to design this machine. The machine is professional for bending two steel bars at the same time. Our CNC stirrup bender is a fully automatic stirrup processing equipment which integrates straightening, bending and cutting etc. The CNC stirrup bender adopts servo motor and top brand PLC intelligent control, can effectively bend steel bar precisely. It also saves workers just with one or two on site.
CNC Stirrup Bender can fully suit to bend various diameters of stirrup, it is manufactured from Qingdao Dongfeihong Intelligent Technology Co., Ltd. Our company imported advanced technology and research to design this machine. The machine is professional for bending two steel bars at the same time. Our CNC stirrup bender is a fully automatic stirrup processing equipment which integrates straightening, bending and cutting etc. The CNC stirrup bender adopts servo motor and top brand PLC intelligent control, can effectively bend steel bar precisely. It also saves workers just with one or two on site.
Long Pun rebar cutting machine is manufactured and modified in Singapore. This machine is powered either by diesel engine/motor. It is easy to operate, widely used in prefab yards, construction yards etc. Product has gone through extensive redesigning and modification and is built to last. Safety features will all be included and assembled before delivery. Machine comes with a 1 year warranty from manufacturer defect.
china coal 0001 Introduction of XTWWQ Horizontal CNC Rebar Bending Line 1 The reabar bending machine has large torque and can produce HRB400 grade 16-50mm high strength steel bars. 2. The machine head adopts a slanted bedroom design, which can be bent in positive and negative directions with a bending angle of 0-180 degrees. 3. The two heads adopt the servo control rack walking mode, which can accurately and accurately position and bend one size, and the error is plus or minus 2mm. 4. The fuselage length can be lengthened according to the size of the user's steel bar to meet the customer's production needs. Parameter of XTWWQ Horizontal CNC Rebar Bending Line Model XTWWQ16-50 Dimensions 1600*300*120 Accuracy (length) plus or minus 2mm Bending accuracy (angle) 1-180 adjustable The longest stirrup side 1600cm The shortest stirrup side 30mm Angle range plus or minus 1-180 Power 25kw
