[CERTIFIED TECHNOLOGY]
With proven technology from ICC-ES 4336 Evaluation, our One-Touch rebar coupler is designed for workers to connect rebars in 3 seconds without any additional tool and skilled labor. We can realize saving costs and reducing construction period.
[BENEFITS]
- Satisfy seismic application design conditions
- Reduce rebar loss, times and costs.
(ex. Based on 200,000EA installation and 2020 cost of labor in korea, We can save about minimum $609,270 to maximum $1,451,214)
- Ensuring worker stabiliy
(ex. Reduced rebar lifting equipment operation time, tool drop)
- No additional tool and professional knowledge needed to connect rebar
Rebar - coupler
Our Rebar Couplers are the parallel threaded mechanical splicing system for reinforcing bars diameter 16mm to 40mm and are designed to provide full tensile strength.
Our Rebar Couplers are the parallel threaded mechanical splicing system for reinforcing bars diameter 16mm to 40mm and are designed to provide full tensile strength.
Advantages: 1.Bar-break feature guarantees fully ductile elongation. 2.No reduction of the bar cross-section area. Working principle: 1.We use GQ50 rebar cutting machine to splice up the end of the rebar. 2.We use Upset Forging Parallel Thread Machine to forge the end of rebar. 3.We use Parallel Thread Cutting Machine to thread the ends of the rebar which have been forged. 4.An upsetting coupler is used to link the two ends of rebar in parallel thread. Assembly benefit: 1.No torque wrench required. 2.Assembly validated by visual inspection. 3.Manufacturing of couplers under strict quality plans. 4.Standard ISO Parallel Metric Thread design.
We are an Accredited Manufacturers of "HES" Parallel Threaded Rebar couplers in compliance with BS 8110, BS 5900, ACI 318 and BIS 16172:2014 codal specifications. We have a huge clientelle across India and Global for many Renouned Projects.
Material:45# carbon steel/45Cr Thread angel: 60°/75° Thread Pitch: 2.0P 2.5P, 3.0P, 3.5P Fit For Rebar Diameter: 16-40mm
Material:45# carbon steel/45Cr Thread angel: 60°/75° Thread Pitch: 2.0P 2.5P, 3.0P, 3.5P Fit For Rebar Diameter: 16-40mm
1. Use solid 45# carbon or 40Cr steel as raw material. 2. Tensile Strenth is more than 540MPa, 630MPa and 720MPa. The standard rebar threaded coupler is suitable for connecting two bars of the same diameter, where one bar can be rotated. It comprises an internally threaded sleeve with two right hand threads which are tapered towards the middle of the coupler. The bar ends are square cut and thread is onto the bar. A nominal allowance of +25mm should be allowed per threaded bar end for square cutting the bar end. The couplers are generally torqued onto the reinforcing bar in the bar threading shop, the internal threads protected by plastic end caps. The threaded ends of the continuation bar are protected by plastic thread protectors.
Parallel Thread Rebar Coupler 14-40mm, made of high quality 45# steel materials tensile strength get 800Mpa Woven bag firstly, and then into pallet
