Rebar Rolling Machine

Rebar threading machine Rolling screw on rebars and join with couplers New technology compared with welding and binding Nylon bag and wooden pallets. Goods also could be packaged as you required.

1.Adopt thread cold rolling technology, no cutting of rebar parent metal, the strength of threaded end is higher than its parent metal. 2.With spiral lead angle technology, easy to roll thread and ensure higher thread accuracy. 3.Rib peeling device adopts automatic opening-closing mechanism. With high efficiency, need only 20 seconds to finish a threaded end. 4.Be able to process rebar sizes 14-40mm, and max. thread length is 120mm for 16-32mm rebar, and 100mm length for 36-40mm rebar with 7.5kw electric motor. 5.The updated version of AGS-40C and AGS-40Z, the wheelbase and shaft diameter of reducer is bigger than AGS-40 and 40E, so that the machine length is longer than AGS-40C. 6.The height of electric motor and reducer is lower than before, so that it could reduce the center of gravity of the whole machine. 7. Equipped with air compressor. 8. There are 2 machine heads for AGS-50D, 1 is for 14-40mm, and the other for 50mm rebar screw.

Cold Rolled Ribbed Rebar machine This cold rolled ribbed rebar machine is a kind of steel roll forming machine for processing Grad Q235 hot-rolled round bar to 3 side ribbed steel equipment. The cold rolled ribbed rebar machine is main part of cold rolled ribbed steel bar production line. 3 ribbed steel bar can be used for bridge engineering, houses construction, high-rise buildings and other industry. It can reduce costs and save about 40% steel. Tensile strength and yield strength of steel bar is reinforced. Cold rolling mill can roll the base metal into three-side thread steel bar which can reach 550 Mpa National Standard (GBT13788). Equipment advantages: high degree of automation,sophisticated manufacturing process, high output, long serving life, easy to operate and maintenance. Technical Parameter ModelMain motor KWDeputy motor KWShift capacity TZJ130 5-722-305.56-10ZJ150 5-9455.513-25ZJ1505-1255-757.530-45

ebar thread rolling machine is developed according to the market demand. It is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335-HRB600 with diameter12-50 mm. The parallel thread rebars processed by the rolling machine will have good comprehensive mechanical properties with the continuous and compact metal fibers. Tensile Strength: increased by 20%-30%; Fatigue Strength: incread by 40%ï¼?60%, Corrosion Resistance: increased by 50%-200%; The strength of steel bar joints is higher than that of steel bar base materials. The mechanical properties of steel bar joints meet and exceed the domestic and international standards.

DBG-50 thread rolling machine is the key equipment to realize the splicing of reinforcing bars. It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335,HRB400,HRB500 and HRB600 with diameter12-50 mm. The max length can be 200mm.

DBG-40C thread rolling machine is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335,HRB400,HRB500 and HRB600 with diameter12-40mm. The max length can be 80mm.

This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range: 16-40 Output speed Reducer:62r/min Electric motor power:5.5KW Water pump motor power: 0.15KW Cutting head movement distance:150mm Or unlimited Out dimension(mm):1700*1000*1400mm Weight:1200Kg

Gross weight 485kg Electric motor power4.0kw Work voltage380v 50hz Output rotate speed of reducer41 r.P.M Wooden case Weight 500tons Dimension1000 w485 w1000mm

CNPOW Double Servo Cutting Machine is divided into 60 type, 80 type, 120 type and so on.It is suitable for pipe cutting in various industries. The height tolerance of the product can be less than 0.07 mm, and the output can be 20-40pcs/min. CNPOW DKG series CNC Pipe Cutting Machine adopts PLC control, touch screen settings, cutting and positioning drive using two servo systems, high positioning accuracy, sliding part using high precision cross ball guide effectively ensuring the machine steelness and product precision.