CRUDE BEESWAX 1.DEFINITION Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging. The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow beeswax. C.A.S. number 8012-49-3 2.DESCRIPTION Yellow or light brown solid that is somewhat brittle when cold and presents a dull, granular, non- crystalline fracture when broken; it becomes pliable at about 35ípC. It has a characteristic odour of honey. 3.FUNCTIONAL USES Yellow Beeswax with a faint characteristic odour suitable for use in the cosmetic, pharmaceutical and confectionary industries. Also it can be used in the high end candle and polish markets. 4.CHARICTERISTICS Solubility Insoluble in water; sparingly soluble in alcohol; very soluble in ether Congealing point 61- 65ípC Acid Value 17-22 (mg KOH/g) Easter Value 70-80 (mg KOH/g) Saponification Value 87-102 (mg KOH/g) Ceresin, Paraffin and Complies with test Certain other waxes Glycerol and other Not more than 0.5% Polyhydric Alcohols Lead Not more than 2 mg/Kg Hydrocarbon Value 16-18 This material meets all the requirements of European (PH Eur). 25KG/BAG.( PLASTIC WOVEN BAG).
REFINED BEESWAX 1.DEFINITION Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging. The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow beeswax. C.A.S. number 8012-49-3 2.DESCRIPTION Yellow or light brown solid that is somewhat brittle when cold and presents a dull, granular, non- crystalline fracture when broken; it becomes pliable at about 35ípC. It has a characteristic odour of honey. 3.FUNCTIONAL USES Yellow Beeswax with a faint characteristic odour suitable for use in the cosmetic, pharmaceutical and confectionary industries. Also it can be used in the high end candle and polish markets. 4.CHARICTERISTICS Solubility Insoluble in water; sparingly soluble in alcohol; very soluble in ether Congealing point 61- 65ípC Acid Value 17-22 (mg KOH/g) Easter Value 70-80 (mg KOH/g) Saponification Value 87-102 (mg KOH/g) Ceresin, Paraffin and Complies with test Certain other waxes Glycerol and other Not more than 0.5% Polyhydric Alcohols Lead Not more than 2 mg/Kg Hydrocarbon Value 16-18 This material meets all the requirements of European (PH Eur). 25KG/BAG (PLASTIC WOVEN BAG).
YELLOW BEESWAX 1.DEFINITION Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging. The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow beeswax. C.A.S. number 8012-49-3 2.DESCRIPTION Yellow or light brown solid that is somewhat brittle when cold and presents a dull, granular, non- crystalline fracture when broken; it becomes pliable at about 35ípC. It has a characteristic odour of honey. 3.FUNCTIONAL USES Yellow Beeswax with a faint characteristic odour suitable for use in the cosmetic, pharmaceutical and confectionary industries. Also it can be used in the high end candle and polish markets. 4.CHARICTERISTICS Solubility Insoluble in water; sparingly soluble in alcohol; very soluble in ether Congealing point 61- 65ípC Acid Value 17-22 (mg KOH/g) Easter Value 70-80 (mg KOH/g) Saponification Value 87-102 (mg KOH/g) Ceresin, Paraffin and Complies with test Certain other waxes Glycerol and other Not more than 0.5% Polyhydric Alcohols Lead Not more than 2 mg/Kg Hydrocarbon Value 16-18 This material meets all the requirements of European (PH Eur). 25KG/BAG.
CRUDE BEESWAX 1.DEFINITION Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging. The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow beeswax. C.A.S. number 8012-49-3 2.DESCRIPTION Yellow or light brown solid that is somewhat brittle when cold and presents a dull, granular, non- crystalline fracture when broken; it becomes pliable at about 35ípC. It has a characteristic odour of honey. 3.FUNCTIONAL USES Yellow Beeswax with a faint characteristic odour suitable for use in the cosmetic, pharmaceutical and confectionary industries. Also it can be used in the high end candle and polish markets. 4.CHARICTERISTICS Solubility Insoluble in water; sparingly soluble in alcohol; very soluble in ether Congealing point 61- 65ípC Acid Value 17-22 (mg KOH/g) Easter Value 70-80 (mg KOH/g) Saponification Value 87-102 (mg KOH/g) Ceresin, Paraffin and Complies with test Certain other waxes Glycerol and other Not more than 0.5% Polyhydric Alcohols Lead Not more than 2 mg/Kg Hydrocarbon Value 16-18. This material meets all the requirements of European (PH Eur). 25KG/BAG.
We undertake kinds of rolling equipment, electric arc furnace, refining furnace and all kinds of continuous casting mill. The model we can produce is as below: Hot mill (medium-plate mill, sheet stripe mill) cold rolled mill, kinds of high frequency welded pipe machine, channel steel, H-section, Angle, I-beam, deformed bar, wire rod and all kinds of high-tech mill. The machining workshop, rivet welding workshop, casting / forging workshop and other branch factories what affiliated to our company can process kinds of work-pieces and equipments. For rolls, there are plate rolling mill roll, Section rolling mill roll, building material rolling mill roll and various shafts. Furthermore, we can produce reduction box, connection machine, universal joint, through water cooling, plate bending rolls, trimming shears, lath cutter, flattening machine and so on. The material of work-piece is: cast iron, high manganese, low alloy, high chromium-alloy, low chromium-alloy infinite chilling etc. 1. Smelting furnace Electric arc furnace;intermediate frequency induction furnace;refining furnace. 2. Kinds of furnace for heat treatment furnaces. 3. Continuous casting machine R4M, R6M 4. Steel rolling production line.
Backing bearing mainly used for cold cluster rolling mill's roller. This mill take the bearing's outer ring as working surface, generally there's 3 or 5set bearings mounted on each roller and even more, depending on its matching rule. The bearing has thick outer ring and thin inner ring, high accuracy up to abec-7. Cylindrical roller bearing based on two or three rows of rollers and are available as full complement bearings (without cage) or as caged bearings. The advantage of the bearings without flanges lies in their particularly simple geometrical form and their very high radial load carrying capacity. Cylindrical roller backing bearings without flanges or flange rings cannot accommodate any axial load. So it is necessary to position thrust washers of bronze or plastic between the side faces of the outer ring and the support saddles. Thrust washers are not required with backing bearings with flanges (or flange rings) as the design of these bearings enables them to accommodate simultaneously acting radial and axial forces. For different requirement, zsj's backing bearing could fall in 2 classes by material: vacuum-degassed bearing steel and electroslag cemented bearing steel. Combined with advanced heat-treatment, grinding process, the bearing's quality is highly reliable. Zsj standard packing
Zsj products Sendzimir mill rolling bearing This bearing has been specially developed for cold rolling mills of the cluster type, but can also be used for other applications, e.G. Straightening or bending machines. This bearing is a roller bearing has a particularly thick-walled outer ring and can be mounted on stationary support shafts to form back-up or straightening rolls. The forces from the work rolls are transmitted via the support shaft and a system of support saddles to the roll or machine stands. The bearing for cluster mills is produced in many designs but is generally based on double or three-row cylindrical roller bearings. Single row needle roller bearing and Double row tapered roller bearing designs are also available. The logarithmic contact profile between rollers and raceways produces a vastly improved stress distribution under all load conditions as well as when the bearing is misaligned under load. An optimized finish on all surfaces in contact serves to enhance lubrication conditions. As lubricant is supplied to the bearings via the support shaft, the bearings have lubrication holes and some have one or more annular grooves in the inner ring. --individual wooden box packing --unique pe material inside box protection --epal standard pallet --vacuumize plastic bag packing if customer requires
Material:abs, pc.Pp etc. Mould base lkm Core/cavity material: nak80, assab136 10 yearsí» experience and technology maturation Moulding product rangeAuto industry, houesehold electronic industry Telecommunication industry Audio & video industry Plastic materialPa, pc, pp, pe, abs, pvc, nylon, etc. Mould classPrecision mould tool Mould baseLkm Mould coreSweden 718h, nak 80, etc. Cavity number1---20 Runner typeHot or cold Mould life3 million to 5 million shots Lead time25---35 days At sennqe, we offer expert services throughout the product development process, from conception to mass production. Materials of the plastic parts available in abs, pc, pvc, pet, pp, pom, ppe, pmma, nylon, tpe and tpr as per customer's requirement. Tool-making and injection moulding equipments: 3 cnc machining centers from usa fadamag group; 4 wire-cut edm from swiss agie charmilles group; 6 die-sinking edm from swiss agie charmilles group; 4 grinding machines; 3 drilling machines; 5 injection moulding machines with clamping force ranging from 160 to 380 tonnages.
Production technology Each type of ceramic fiber modules, using corresponding ceramic fiber blanket according to ceramic modules' structure and size, is produced with a special machine. During the process of manufacturing, certain compression proportion is kept in order to make ceramic fiber modules to form a seamless entirety when used in a high temperature expansion situation. All the modules can be mounted directly on to industrial furnace. Customers may choose different ceramic fiber modules with different material and structure according to furnace's structure, temperature, environment atmosphere , etc. Modules available are in z-block, hanging block, beam block, or according to customers' drawings. Characteristics Low thermal conductivity Low heat storage Excellent thermal stability, thermal shock resistance and good elasticity. Furnace liners will have no cracks because of the expansion of ceramic fiber modules. The expansion of ceramic fiber modules can compensate the shrinkage of fiber, the liner's insulation property is improved. The modules can be installed quickly. The anchors are install on the cold side, the requirement of the anchor material can be lowered. Ceramic fiber modules
Fresh apple Color: red Specifications: 32-36-40-44-64-72-80-88-100-113-125-138-150-163 Grade: a;b;c;a and b mixed;b and c mixed;a, b, c mixed Inner packing:paper or foam tray, pink net and freshness protection package Outer packing: N.W.10kgs/ctn(24-28-32-36-40-44), n.W.18kgs/ctn(72-80-88-100-113-125-138-150-163), n.W.20kgs/ctn(72-80-88-100-113-125-138-150-163) Production capacity: to pack 1*40'rh fcl need 1-2days Qty: A) no pallet 2212ctns/40'rh fcl working on n.W.10kgs/ctn; 1264ctns/40'rh fcl for 18kgs packing 1186ctns against 20kgs packing B) 7*7*21pallets/40'rh fcl for 20kgs packing and 7*14*21pallets for 10kgs packing Harvesting season: starting late sep. And end by mid-nov. Supplying time: as far as refrigeration storage from mid-oct to next june, the whole year be work for ac cold store
1. Gate Composition: mechanism, housing, gates control board, power 2. Driving Mode: photoelectric sensor, motor driven 3. Material: 304stainless steel with cold-rolled steel plate 4. Access Modes: locked; PC remote control; control by authorization 5. Passing Speed:30people /minute (N/C states); 60people /minute (N/O states) 6. Channel Width: 600mm 7. Operating Mode: single-directional; bi-directional, 16sets of passing mode 8. Temperature: 0 degree celsius~60degree celsius 9. Communication Interface: one RS232 electric standard interface; two card reader signal (passive); one fire alarm signal. 10. Humidity:5%~90% 11. Power: input AC220V; output AC24V; DC12V 12. Woring Enviornment: indoor /outdoor(need rain-proof frame) 13. Overhaul Manholes:2 14. Service Life: continuous switching for more than 3millon 15. Overall Dimensions: 1880L x 320W x 1040H mm . Wooden Box.
Our company supply various refractory material, such as 1). Fire bricks 2). High alumina brick 3). Insulation brick tm23, tm26, tm28 4). Resist aid brick 5). Ceramic fiber blanket 6). Castables, mortars , cements, ramming mixes The specification of fire brick is as follows: Fire bricks for general use Y-fb gfb40 gfb42 gfb45 Al2o3(%)min. 40 40 42 45 Fe2o3(%)max. 2.5 Refractoriness()min. 1710 1730 1750 1750 Refractoriness under load 0.2mpa()min. 1300 1350 1400 1400 Apparent porosity(%)max. 22 20 20 20 Cold crushing strength (mpa)min. 30 30 35 40 Linear change after reheating(%)max. At 1350íß2h +0.1 -0.4 At1400x3h +0.1 +0.1 +0.2 Also we can supply the product as per the customers' requirement. Fire bricks for general use Y-fb, gfb40, gfb42, gfb45 Al2o3(%)min.: 40%, 42%, 45% Refractoriness.:1710, 1730, 1750
Summarize: 1. The led cold light bleaching system which is made in our company is the most advanced brand in china at the present time. It is controlled by the microcomputer inside the machine, and it can catalyze the whiten pharmacy and cause a reaction exactly and effectively, and it will make the teeth whiten deeply. Its output blue light wavelength is 430-----485nm, and it can irradiate all parts of the teeth effectively, so every one of the tooth can be whiten. It is the key breakthroughs of the clearing the teeth and the whiten technology in the dental area. 2. If you use the whiten pharmacy which is provided by our company, the whiten effect will be more perfect. Accommodation: External causes of tooth color pigment nien 1. External color of the pigment nien teeth (smoke spot coffee spot, tea spot and so on). 2. Internal pigment teeth tetracycline pigmentation teeth, dental fluorosis. 3. Hereditary xanthodont. 4. The reason unknown which cause the teeth darken and yellowing. Technical parameter: Dimension of frame. Size: height: 142cm; wide: 63cm; arm length: 125cm· longest Weight of machine·ª18.5k; Input voltage·ªac110or240v·+50/60hz; Power·ª30w; The wavelength of blue light·ª460-490m; The whiten hour 10·í15minutes for one time, two or three times for one period of the treatment.
Name: Inner Tape (Anti-corrosion Tape,Cold Applied Tape) Type: T-140, T-150, T-165, T180, T1100, T1130 Price: FOB Ningbo or Shanghai Place of production: China Brand: Ideal Term: L/C, T/T Volume: 8,000,000sqm/yr packing: Carton Features: The specification of the tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.40 - 1.30mm Width: 50, 75, 100, 150, 230,300mm Length: 30 - 200m. Tapes specifications: 1) T-140 with 0.38mm / 15mil thickness and 50 - 230mm width 2) T-150 with 0.51mm / 20mil thickness and 50 - 230mm width 3) T-165 with 0.64mm / 25mil thickness and 50 - 230mm width 4) T-180 with 0.76mm / 30mil thickness and 50 - 230mm width 5) T-1100 with 1.02mm / 40mil thickness and 50 - 230mm width 6) T-1130 with 1.27mm / 50mil thickness and 50 - 230mm width .
Thj series of lifts, the variety specification is complete, novel and unique structure, manufacture excellent. Line with the latest technology standards and related requirements, with a safe, reliable, smooth operation, durable characteristics such as factories, warehouses ideal for freight transport. Ac two-speed electric drive, simple structure, convenient maintenance, personnel and cargo transportation-safe is economical and inexpensive. The envelope structure of a solid, solid, efficient motor drive system, so that the elevator has a strong load-bearing capacity and security. Is suitable for factories, mines, warehouses, shopping malls, restaurants, cold transportation library staff and the cargo transported. The use of advanced control systems for the computer to remove the traditional elevators, contact the factors controlling the existence of the failure to make elevator operation more reliable. Uses computer-optimized design of car styling, spacious and bright, economical and practical, you can according to the user requires the use of large-tonnage loading and unloading operations, can provide the same interior design of passenger elevators at the same level. With various types of open-door form, fully meet the diverse needs of the width of the door.
Solar keymark Solar collector Reliable, efficient, twin-glass solar tubes heat pipe Copper heat pipes for rapid heat transfer Corrosion resistant brazed copper header Fetures: 1) length: 1800mm; thickness: 0.8mm 2) the manifold: Made of red copper Conducted by heat transfer medium liquid 3) the out casing: Made of aluminum alloy mold material of high-strength with air flow design 4) water can't flow into vacuum tubes 5) resistant to high-pressure( 6bars) 6) resistant to extremely cold or hot environment 7) no harm or pollution, environment protective, clean, healthy Economic, invest once and benefit for ever 8) to assemble many collectors together for the solar central heating project of the hotel and factory are permitted. Modelabsorb a rea (m2)heat pipesupply hot water (l/)qty. Per 20/40 container (set) Diameter(mm) length (mm) no. (pcs) Free/j-1800/58-181.4458180018150/6084/175 Free/j-1800/58-201.6058180020175/6077/160 Free/j-1800/58-241.9258180024220/6064/133 Free/j-1800/58-302.4058180030260/6052/106 Whole packaging
1.) 36cc Powerful Quiet Running Engine. 2.) 2-Cycle Engine - with Dual Piston Rings and Chrome-Plated Cylinder for Longer Engine Life. 3.) 17" Cutting Swath. 4.) 12" 2-tooth Steel Reversible Cutter Blade, Nylon Cord Head & String Included. 5.) Pro-Style Straight Shaft for Easy Trimming Under Shrubs and Low Branches. 6.) Limited Two Year Factory Warranty. 7.) Safe Drive Clutch Plus Fast Start primer for Faster Cold Starting. 8.) Adjustable Bike-handle. Light Weight Design for Easy Use and Handling. 9.) Rugged 2-Cycle Trimmer is Built for Endurance. 10.) Fast and Efficient Tirmming Around any Garden. 11.) Heavy Duty Bearings for Improved Power Transfer Packing (Standard seaworthy): 1pc 2 carton 1.) Packing Size: (4 pcs) Engine Carton: 50 x 33 x 70 cm Shaft Carton:157 x 19 x 26 cm 2.) Net Weight/ Gross Weight (4 pcs): Engine Carton: 15/ 15.7kg Shaft Carton: 13/ 13.7kg 2.) Packing Quantity: 510pcs/20" FCL Container 1020pcs/40" FCL Container
We have accumulated a lot of experience in hot runner system mold. Our designer and engineer are familiar with dme, hasco, yudo, mold master, mastertip, husky hot runner system. Many factors have to be taken into consideration for the hot runner system, for example: the shape, size and thickness of the part; the layout, the gating location, also the property of resin and so on. With the help from hot runner supplier, we will select the best-fitted one for you. Furthermore, we could provide you favorable after-sale service. Hot runner mold theory: ííwith heat manifold and heat drops inserted in injection mold, the resin could keep in the molten state as it flows through the barrel. Then it gate into the cavity just as inject directly from the machine nozzle. No runner and cold sprue will exist during the production. Hot runner benefits: 1. Reduce cycle time a lot and then increase the production efficiency. 2. Improve the gating appearance. 3. Little waste or no waste of the resin. 4. The hot runner could reduce the flow resistance and then the injection pressure and clamp force could reduce a lot. Then it offer opportunity to produce the flow strained part. 5. Fewer mold-in stress.
"HUATONG" OA access floor is corner supported type. The panel is put onto pedestals and one corner fixed to one pedestal. The floor system is composed of panel, pedestal, gasket and so on. Each panel can be moved freely and can be interchanged with other panels. We source high quality cold rolling steel from Bao Steel. Bend top steel to bottom steel, then rivet joint the two steel. This kind of joint strengthens the border intensity and conquers the disadvantage of split of the joint. With this technology, the folded border will not warp easily and becomes an integrative part of the panel. It's the advantage any other OA floor can not reach. OA floor has low requirement to the flatness of ground. It's no need to do anything included making level of the ground before installation. Baring a 20KN power for 1 minute, the pedestal is perfectly well as it was. Pedestal head and base are galvanized to avoid rust and to ensure the floor system operates well. With an adjustment of 20mm of the pedestal, it makes the floor system flat with scraggly ground. OA Floor has a perfect loading performance, stability and durability. It's nonflammable fire proof Class A material.
(ISO) Steel Security Door (FX2501): 1) Material: Cold-rolled steel, plastic coated 2) High definition peephole 3) The through window concealed in the door is both practical and beautiful 4) Stainless steel doorsill will never get rusty for long-term use 5) Soundproo 6) Bright, lustrous and durable appearance 7) Environmentally friendly Product Origin: China Brand name: FEIXIANG Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/T Supply Ability: 25, 000PCS/month Delivery Lead Time: 15 days 1) Outer size: A) Height: 1930/1970/2050mm or at customers' request B) Width: 860/900/960mm or at customers' request 2) Thickness of door leaf: 50, 70, 90mm 3) Direction of opening: Left and right 4) Various patterns, colors and sizes available upon request Packing: Standard export packing and 1PC/ctn Conveyance: Qty/20'''''''' FCL: 105-150PCS Qty/40'''''''' HQ: 270-315PCS (different door size, different loader).
