General Information * Panel dimensions: 600mm x 600mm x 30mm/35mm thick * Material: Calcium Sulphate, mineral, etc * Four sides are protected by edge trim * Stringer is connected to pedestal head with screws and pedestal is sticked to the ground . Covering Options * Plastic (Conductive) finish * Galvanized steel finish * HPL finish . Applicaton Area * Calcium sulphate panels with plastic finish and galvanized steel finish are applicable in offices with the finished floor height from 80mm to 200mm * Calcium sulphate panels with HPL finish is applicable in computer rooms with the finished floor height from 150mm to 600mm.
"HUATONG" OA access floor is corner supported type. The panel is put onto pedestals and one corner fixed to one pedestal. The floor system is composed of panel, pedestal, gasket and so on. Each panel can be moved freely and can be interchanged with other panels. We source high quality cold rolling steel from Bao Steel. Bend top steel to bottom steel, then rivet joint the two steel. This kind of joint strengthens the border intensity and conquers the disadvantage of split of the joint. With this technology, the folded border will not warp easily and becomes an integrative part of the panel. It's the advantage any other OA floor can not reach. OA floor has low requirement to the flatness of ground. It's no need to do anything included making level of the ground before installation. Baring a 20KN power for 1 minute, the pedestal is perfectly well as it was. Pedestal head and base are galvanized to avoid rust and to ensure the floor system operates well. With an adjustment of 20mm of the pedestal, it makes the floor system flat with scraggly ground. OA Floor has a perfect loading performance, stability and durability. It's nonflammable fire proof Class A material.
Huatong anti-static raised access floor panels are widely used in computer rooms. This access floor system has excellent anti-static performance. It can eliminate the static electricity produced by the computers when they are working and the stability of the computer will be maintained. Thus the life span of the computers will be prolonged. Meanwhile, raised floor panels will greatly facilitate the whole installation. The panels can be put directly on the rigid network system, which is made up of pedestals and stringers. The panel sizes are controlled with great precision, which assures the free interchange between panels. With convenient wire layout and various outlet boxes, the system can optimize the cabling in computer rooms.
Perforated panel Many types of "Huatong" Aluminium perforated panel shouldbe available for your choice. With 1024 pieces or 1280 piecesconcave holes, perforated panel of 1024 holes supplies the airflow rate of 18.09%í½27.02% and the air flow rate of 1280 holesis 22.61%í½33.77%.They can meet the air flow requirements ofcomputer rooms and clean *****, Huatongaluminium perforated panels assures the free interchangewith other panels. Advantages 1. Elaborated Made 2. Class A construction material (incombustible) 3. High loading performance, Low deflection 4. Recycling, economical 5. Easy for holes opening 6. Acceptable static dissipative performance 7. Precise holes opening, concave design.
General information: Panel dimendions:600mm*600*30(40)mm thick Material: high performance chipboard core Four sides are protected by edge trim Stringer is connected to pedestal head with screws and pedestal is sticked to the ground . Covering options: Pvc finish Hpl finish Galvanized steel finish . Application area Wood core panels are applicable in offices, computer rooms etc.
Product structure Woodcore access floor consists of high density (720kg/m3) chipboard. Galvanized steel sheet is bonded to the bottom of the chipboard. Hpl, pvc or ceramic is stuck to the top of the chipboard, four edges are sealed with pvc edge trims. Product feature 1. Water-proof, fire-proof, anti-corrosive and sound insulation. 2. High dimension accuracy and excellent interchangeability. 3. Good loading performance. 4. Elaborated made and good decorative effect. Application Anti-static woodcore floor is widely used in places where have high requirement of anti-static, loading and finished appearance, like: bank, communication equipment room, intelligent office and so on.
Ht 600/610 oa raised access floor is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. There is foaming cement fully filled, with corner-lock holes punched in four sides of the panel. Carton&pallet
1.Panel- 30mm thickness calcium sulphate board , pvc/abs corvered four edges, steel/aluminium on the bottom plate , wildly brand top tiles could be carpet , hpl pvc , ceramic stone , or other tiles as you like 2.Accessories -die casting steel structure pedestal plastic gasket on top , height could be 70mm -1500mm , with or without square tube stringer steady connect the system
Our Advantage: 1. High-quality with most competitive price; 2.Enviroment friendly and energy saving; 3.It is adjustable, the best height is 50mm, saving the space of room; 4.Light weight, small noise when working; 5.Main components, panel, trunk cover plate corner bottom plate. Materical Steel, Wood, Calcium Sulfate Specification 500*500mm, 600*600mm Supply Ability 5000 Square Meter/Square Meters Per Day Package Pallets For Panels Cartons For Accessories Products Certificate ROHS, CE, GSG, MOB, KS, VOC Infill Cement, Wood, Calcium Sulfate Finish Material Steel With Cement Inside, HPL
