N220 Iodine-absorption Number, g/Kg121í+5 DBP Absorption (10-5 m3/kg )114í+5 Compression DBP absorption (10-5 m2/kg)90í½105 Nitrogen Surface area Absorptive(103m2/Kg)109-129 Surface of CTAB absorption rate (102 m2 / kg )102í½121 Ash Content%0.5 45ª¦m Sieve Residue,%í_0.10 150ª¦m Sieve Residue,%í_0.02 Surface of He absorption rate (102 m2 / kg)112í½126 Tint Stregth( %)105~125 25kg net bag, 16MT in 20 FCL
Center lathe Kramatorsk 1a 660, 1250 x 6300 mm, 1987 Kramatorsk kz 16131, 2500 x 10 000 mm, 1988 Wmw niles dp2/s3 , 2000 x 10 000 mm , 1984 Kramatorsk kz 1683, 4000 x 16 000 mm, 1970 Kramatorsk kz 16135 , 4000 x 20 000 mm, 1988 Kramatorsk 1a 680, 3200 x 12 000 mm, 1979 Poreba tca 125/6, 1250 x 6000 mm, 1960 Poreba tca 125/8 , 1250 x 8000 mm, 1963 Poreba trp 63 cnc, 650 x 2000 mm, 2003 Poreba tcg 200/10, 2000 x 10 000 mm, 1984 & 1974 Poreba tca 125/3, 1250 x 3000 mm, 1966 Poreba tpk 90/5, 930 x 5000 mm, 1987 Poreba tpk 90/3, 930 x 3000 mm, 1987 Kramatorsk kz 16100, 2500 x 3850 mm, 1984
The pipe is manufactured from 100% virgin unplasticized polyvinyl chloride compound (PVC-U). No re-worked material is used. The pipe is produced under an ISO 9001-2000 Quality System. Duzgunler Plastic pipes are produced in a range of pressure ratings 4, 6, 10 and 16 Bar. Duzgunler Plastic pipes are produced in a range of nominal pressure (PN) at 20°C. The appropriate derating factors should be applied for working pressures when subjected to higher temperatures. The nominal outside diameters and nominal wall thickness are based on an overall service (design) coefficient C=2,5 from 50 mm.to 90 mm. and C= 2 from 110 to 355. Duzgunler Plastic pipe is used in a wide range of applications, such as: * Irrigation systems main/sub-mains. * Chemical industrial processes. * Pressurized water supply (city town, industrial, home, commercial.) * Drainage/sewage applications. * General services, domestic water, A/C drainage. * Ducting, electrical, telecommunication. * Industrial process plants oil/gas/petrochemical. * Desalination processes, brine disposal, mineral water Features of Duzgunler Plastic U-PVC pipes: * Fully compliant with TS 274 EN 1452 and ISO standards. * Resistant to a wide range of chemicals and corrosion. * High Impact Resistance * Quality assured and tested to the strict specifications of the standard for dimension compliance, impact resistance, burst pressure, flattening & joint tightness. * Smooth internal bore for low friction losses. * Compatible with the full range of PVC-U Pressure fittings. * Long service life under a wide range of conditions. * Will not support combustion. There are 4 types according to their pressure resistance: PN4 PN6 PN10 Pn16 Available Diameters (mm) : 50 63 75 90 110 125 140 160 200 225 250 280 315 355 400 Technical Features: Raw Material: U-PVC Standard: TS 274 EN 1452 Dimension: Pipes produced in ranging from Ø 50 mm. dia. up to Ø 400 mm. dia. Normally supplied in 6 m length Others can be supplied on request. Connection: rubber ring joint for all size Technical Features: -Gravity: 1350 < p < 1460 kg/m² -Opaque: max. % 0,2 -Deformation heat: 80 C -Resistance to diklormetan: Resistant -Quantity of vinilcloridmonome: less than 1ppm -Resistance of int. Pressure: Two times of nom pressure -Resistance to stroke: TIR < % 10 Unpacked.
Quick Details Place of Origin:Liaoning, China Brand Name:JIANXI Model Number:JX-MA-00104 Material:CPVC Specification:50mm-315mm Length:6m or customized Thickness:3.0mm-10.0mm Standard:ISO9001:2008, ISO,JIS,GB,DN,ASTM,BS Color:Orange or customized Density:1350kg/m3 vicat softening temperature:â?¥93 friction coefficient:â?¤0.35 Longitudinal shrinkage:â?¤5% Application:Electric cable and wire protection shape:Round Advantanges:High temperature resistance,insulating,fire proof,chemical resistance Surface:Smooth Supply Ability:4800 Ton/Tons per Month Packaging Details Each pieces with film,standard exporting packages Customized package welcome. Port Dalian Lead Time : Quantity(Meters) 1 - 5000 5001 - 10000 >10000 Est. Time(days) 5 10 To be negotiated Cpvc electric communication pipe for electric cable and wire protection Material CPVC Length 6m or customized Thickness 3.0mm-10.0mm Certificate ISO9001:2008 Specifications 50*3.0 110*8.0 167*6.0 219*10.0 63*3.0 125*4.0 167*8.0 250*6.0 75*3.0 125*5.0 192*6.0 250*8.0 75*4.0 125*6.0 192*8.0 250*10.0 90*3.0 125*8.0 200*5.0 315*5.0 90*4.0 160*4.0 200*6.0 315*6.0 90*4.5 160*5.0 200*8.0 315*8.0 110*4.0 160*6.0 200*10.0 315*10.0 110*5.0 160*8.0 219*6.0 110*6.0 167*5.0 219*8.0 Advantages 1.Good insulation 2.Good heat resistance 3.Good compression resistance 4.Good impact resistance 5.Good flame retardant 6.environmental protection material 7.Convenient installation 8.long service life Place of origin Liaoning,China
ModelWc02041 SizeThicknessOrifice 0000-3 0.7 003-6 0.8 06-10 1.0 110-20 1.2 220-40 1.5 340-60 1.8 460-80 2.1 580-125 2.5 6125-200 3.1 7200-250 3.6 8250-300 4.1. 200pcs/ctn, 46*26*13cm
Description: * Ideal for Meat & Food processing Industry * Resistant to animal oils and fats * No rivet with textile or metal base * Extremely hygienic, pore-free surface * Flexible, lightweight material, adjustable to all users * Color available: White/Red/Yellow/Blue Size Available: Length: 100/105/110/115/ 120/125/130/135(cm) Width: 90/77(cm) Thick: 0.15/0.2/0.3/0.4/0.5(mm). 1pcs/bag 60pcs/carton.
Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX MAC addresses table: 1K Data buffer: Built-in 128Kbyte RAM . Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps Cable: UTP: Cat. 5 (the max distance up to 100m) Fiber ( Multimode): 50/125, 62.5/125m, the max distance up to 2km or 5km Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m, the max distance up to 20 -120km Flow Control Full Duplex: Supporting standard IEEE802.3x Half Duplex: back pressure LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act. Power Requirement: AC 170 ¡« 240V, DC 5V. Ambient Temperature: 0 ¡« 70 Humidity: 5 ¡« 90% Dimensions: Internal power: 30, 110, 140mm External power: 26, 70, 93mm.
We are producing Mango fruit juice Guava fruit juice Peach fruit juice Mixed fruit juices Pomegranate fruit juices Red grapes fruit juices We can blend fruit drinks & fruit juices as per your requirements. Available packing sizes 125 ml 250 ml 550 ml 1000 ml 2000 ml 5000 ml
1. dedicated DN40-2000mm for DI, carbon steel, HDPE, PVC, FRP, GRP, others required 2. Universal (wide range ) DN50- 600mm . Material: ductile iron ï¼?DIï¼?; standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; FBE coating; suitable medium: potable waterã??drainageã??sewageã??waste water; suitable tempreture: -40°ï½? 125°; packing: plastic film plus pallet; origin: China.Diameter:DN40-2000
1. dedicated DN40-2000mm for DI, carbon steel, HDPE, PVC, FRP, GRP, others required 2. Universal (wide range ) DN50- 600mm . Material: ductile iron ï¼?DIï¼?; standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; FBE coating; suitable medium: potable waterã??drainageã??sewageã??waste water; suitable tempreture: -40°ï½? 125°; packing: plastic film plus pallet; origin: China.Diameter:DN40-2000
1. dedicated DN40-2000mm for DI, carbon steel, HDPE, PVC, FRP, GRP, others required 2. Universal (wide range ) DN50- 600mm . Material: ductile iron ï¼?DIï¼?; standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; FBE coating; suitable medium: potable water,drainage,sewage,waste water; suitable tempreture: -40°ï½? 125°; packing: plastic film plus pallet; origin: China.Diameter:DN40-2000
antenna size 125 *7 mm SMAconnector type can be choose RG174 cable length according to customer requirement frequency range :433+/- 5 mhz 868MHZ/gsm/2.4GHZ VSWR less than 1.5 Gain :3.0dBi ISO 9001:2000 standards 3-7 days shipment we can make the 433mhz ,868mhz ,GSM ,2.4G antennas ! Welcome to inquiry .
Solid or stranded tinned copper conductor, 26AWG-9AWG Rated temperature: 125 f¦ Rated voltage: 600 voltage Non-PVC Insulation(XL-PE), Psssed UL VW-1 vertical flame test. Halogen free EL-PE insulation, Horizontal Flame test Applications: They are the same with the inner fixed wires for home appliance,headlamp, mechanical etc. Insulation Potential Strength: 2000 VAC/min. Roll package
Type Model Bore/Stroke PoweráKW/RPM CUMMINS 4BT 102/120 77/2800 CUMMINS 4BTA 102/120 88/2800 CUMMINS 6BT 102/120 118/2600 CUMMINS 6BTA 102/120 132/2500 CUMMINS 6BTAA 102/120 155/2500 CUMMINS 6CT 114/135 180/2200 CUMMINS 6CTA 114/135 191/2200 CUMMINS 4BTA3.9-G 102/120 50/1500 CUMMINS 6BT5.9-G 102/120 97/1500 CUMMINS 6BTAA5.9-G 102/120 120/1500 CUMMINS 6CT8.3-G 114/135 122/1500 CUMMINS 6CTA8.3-G 114/135 159/1500 ISUZU 4JB1 93/102 57/3600 ISUZU 4JB1T 93/102 68/3600 ISUZU 4BD1 102/118 70.6/3200 ISUZU 4BD1T 102/118 83/2800 ISUZU 6BD1 102/118 103/3000 ISUZU 6BD1T 102/118 120/2800 ISUZU 4HF1 112/110 110/2600 ISUZU 4HE1T 110/125 125/2300 DEUTZ F6L413F 125/130 77-141/1500 DEUTZ F8L413F 125/130 103-180/1500-2650 DEUTZ BF8L413F 125/130 235/2500 DEUTZ F12L413F 125/130 282/1500 DEUTZ F12L413FC 125/130 282/1500 DEUTZ BF6L513 125/130 177/2300 DEUTZ BF8L513 125/130 243/2300 DEUTZ BF8L513FL 125/130 235/2300 DEUTZ BF12L513FLC 125/130 386/2300 DEUTZ BF6L513FLRC 125/130 177/2100 DEUTZ F3L912 100/120 44/2500 DEUTZ F4L912 100/120 51/2500 DEUTZ F6L912 100/120 78/2500 DEUTZ F4L913 102/125 56/2500 DEUTZ F6L913 102/125 85/2500 DEUTZ BF4L913 102/125 78/2500 DEUTZ BF6L913 102/125 118/2500 DEUTZ F3L912 100/120 26.5/1500 DEUTZ F4L912 100/120 35/1500 DEUTZ F6L912 100/120 53/1500 DEUTZ BF4M1013 108/130 117-140/2300 DEUTZ BF6M1013 108/130 177-220/2300 DEUTZ BF4M2012 108/126 90-118/2500 DEUTZ BF6M2012 108/126 118-170/2500 DEUTZ BF6M1015 132/145 195-352/1500-1800 DEUTZ BF8M1015 132/145 333-469/1500-1800 DEUTZ TCD2015V6 132/145 DEUTZ TCD2015V8 132/145 DEUTZ TD226B-3 105/120 45/1500 DEUTZ TD226B-4 105/120 55/1500 DEUTZ TD226B-6 105/120 88/1500 PERKINS 1004-4 100/127 58/2200 PERKINS 1004-4T 100/127 83/2400 PERKINS 1006-6 100/127 96.5/2200 PERKINS 1006-6T 100/127 119/2400 PERKINS PHASERá135Ti 100/127 101/2500 PERKINS PHASERá160Ti 100/127 118/2500 PERKINS PHASERá180Ti 100/127 134/2500 PERKINS PHASERá210Ti 100/127 156/2500 PERKINS 1004Gá 100/127 43.2/1500 PERKINS 1004TG 100/127 67.4/1500 PERKINS 1006TG1A 100/127 86.3/1500 PERKINS 1006TG2A 100/127 94.4/1500 PERKINS 1006TAG 100/127 128.4/1500 IVECO 8140.27Sáá 93/92 76/3800 IVECO 8140.47 93/92 85/3800 IVECO 8140.23 94.4/100 76/3600 IVECO 8140.43 94.4/100 87/3600 IVECO 8140.43Cá 94.4/100 76/3600 IVECO 8140.43Z 94.4/100 90/3600 IVECO 8140.43S 94.4/100 92/3600 IVECO 8140.43N 94.4/100 107/3600. The price is competitive, and the quality is original.
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 Note: Iron cores of other specifications can be provided upon request of users b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
factory Circulating oil pump suction filter OF3-08-3RV-10 for power system strong technical force, with CNC lathes, machining centers, 1.6M vertical lathe, 2.5M vertical lathe, 3.2M vertical lathe, 4M vertical lathe, CNC boring machine, gantry planing, gantry milling, 80mm Bending Machine and other sophisticated equipment, Strong welding capacity. also long-term supply of power plants, steel accessories are as follows: can offer many spare parts for power plants as below: DF-Circulating oil pump suction filter OF3-08-3RV-10-DF filter LJ.00.03 pp water filter cartridge KLS-50U/200 hydraulic spin on return line filter TZX2-6310 water filter machine purification system DLS-300 air filter QUQ4 diatomite filter DZ.04.002 filter hydraulic ZU-E25040FS transformer oil filter machine HXW-400 80 centrifugal oil filter WNY-001-EH cross reference oil filter ZL366-100 30 aquarium water filter KLS-125T/60 pp filter cartridge making machine SG-125/0.8 best water filter DLS-600 Filter AP6E602-01D10V/-W filter DR1A401EA03V/-W oil filter CFRI-100 40 filters oil SDGLQ-11T-36K oem oil filter 37540-02100 Water filter element SGLGLQ-16T-50 oil filter TZX2-630 5 pleated filter cartridge FBX-160 5 Circulating oil pump suction filter OF3-08-3RV-10 air filter QUQ3-10 40 0.1 pp filter XLSL-001-03 oem oil filter SRLF-850 25P Hydraulic filter element TFX-630 180 aquarium water filter SGL-600A replaceable filter drier core PA810-004D lube oil filters LXM-15-14 cross reference oil filter WUI-A250 80FS oil filter WU-H63 40S pp melt blown filter machine SGLQ-600A cartridge filters LY-38/25W oil filter WU-A630 40FS filter cartridge machine FBX-160 1 filter WNY-2000 10 lube filter 2-5685-0604-99 pp filter cotton DSG-65/08 water filter housing SGL-600A cellulose filter CZX-40-3Q3 melt blown cartridge filter KLS-100I filter cartridge machine HTGY300B.8 Filter element 1300R003BN4HC Filter RFLDW/HC661DAN25BD1 filter LH0500D005BN/HC filter water systems SL-31/45 pp water filter cartridge KLS-50U/280 filter HX.BH-160 5W filter C13-110 250A25C oil filter PQI-H450 10Q2SIII filters oil ZL366-A100 40 water separator filter SLQ-2-X-5um oil filter wrench SFAX-250 3 filter FAX-400 3 filter TFX-25 100 water separator filter KLS-50U/280 pp spun filter DSG-125/08 filter HX-160 1Q Circulating oil pump suction filter OF3-08-3RV-10 DFZYR-2023-4-23-ZYR
These bales consist of lesser compressed and loosened coco material which can be used for multiple applications depending on the growth requirement. The bales can be made into different mixtures by increasing or decreasing the percentage of coir fiber present within the mix. We can add coco chips or crushed materials depending on the requirement. They help in increasing fertilizer and irrigation efficiency. 25kg 500kg 1 Ton Size : 33 x 45 x75 cm 110 x 110 x 125 cm 110 x 110 x 250 cm Moisture : 40% - 50% 40% - 50% 40% - 50% Volume : 200L 2600 , 2800L 5500, 6000L Packing : LDP/HDP Printed Bags : DP/HDP Printed Bags : LDP/HDP Printed Bags : Loaderbility 640 Bales per 40 HC Container : 40 Bales per 40 HC Container : 20 Bales per 40 HC Price of product : On request Product origin : Sri Lanka Key Specifications/Special Features : As per Catalogue and we can do customized spec also Harmonization System (HS) Code : Can be issued with Performa Invoice Minimum Order Size : Can be discussed Packaging details : LCL, FCL or Airfreight
1.16A 250V- T85/55 50Hz 16A 125/250Vac.50/60Hz 1/4Hp 125/250Vac 50/60Hz 2.Temp limits:85 Max 3.Dielection strength: 2500Vac 4.Insulation resistance: more than 100M 5.Contact resistance: less than 50m Yueqing luster electronics co., ltd established in 1998, is a manufacturer professional in marketing Rocker switch, Micro switch, Rotary switch, Water level switch..etc. Our products have gained certifications from UL. CUL. TUV. VDE. ENEC. KEMA. CB. CCC. CQC. Also we have passed ISO9001:2000 since 2005. If you have need, pls dont hesitate to contact me, tks in advance!
Stone Jaw Crusher Machine Application Mining, metallurgy, construction, highway, railway, water and chemical industry Jaw crusher machine suitable Materials: Marble, granite, basalt, limestone, quartz stone, gravel, iron ore, copper ore etc. jaw crusher exporter Stone Jaw Crusher Machine Advantages 1.Good stability, high reliability Moving jaw Assembly adopts the high quality casting components,heavy eccentric axis also forging billets for processing, which makes the Jaw Crusher with exceptional stability. Compared with other crushing machine of the same specification, we use the eccentric shaft bearings of larger and more durable,so that it has a higher carrying capacity, ensuring their reliability. jaw crusher exporter Stone Jaw Crusher Machine Specification Model Feeding hole Size (mm) Stuff Size(mm) Output Size (mm) Capacity(t/h) Power(kw) Overall Dimensions(mm) PE-150¡¨¢250 150¡¨¢250 125 10-40 1-5 5.5 758¡¨¢758¡¨¢794 PE-250¡¨¢450 250¡¨¢450 210 20-60 5-20 15 1500¡¨¢1400¡¨¢900 PE-250¡¨¢750 250¡¨¢750 210 15-70 15-30 22 1400¡¨¢1300¡¨¢1350 PE-250¡¨¢1000 250¡¨¢1000 210 25-60 15-52 30 1600¡¨¢2000¡¨¢1500 PE-250¡¨¢1200 250¡¨¢1200 210 25-60 20-60 37 1900¡¨¢2200¡¨¢1500 PE-300¡¨¢1300 300¡¨¢1300 260 30-90 30-70 55 1800¡¨¢2300¡¨¢1700 PE-400¡¨¢600 400¡¨¢600 340 40-100 16-65 30 1700¡¨¢1800¡¨¢1600 PE-500¡¨¢750 500*750 425 50-100 45-80 55 1892¡¨¢2054¡¨¢1853 PE-600¡¨¢900 600*900 500 65-160 70-120 55-75 2520¡¨¢1840¡¨¢2303 PE-750¡¨¢1060 750*1060 630 80-140 130-260 80-90 2620¡¨¢2302¡¨¢3110 PE-900¡¨¢1200 900*1200 750 95-165 220-380 110 3789¡¨¢2826¡¨¢3025 PE-1000¡¨¢1200 1000*1200 850 195-265 230-380 110 3889¡¨¢2826¡¨¢3025 PE-1200¡¨¢1500 1200*1500 1020 150-300 400-800 200 4200¡¨¢3750¡¨¢3820
