PVC Float Flow meter model RPV164 is made by transparent AS body with PVC union connector and ABS coated steel floator, the function is to measure the flow rate of pipe system. FLOW METER is easy to observe the flow inside the system, PVC flow meter measuring range from 5l/h to 200m3/h, connect size from 20mm to 160mm by socket, and DN15 to DN150 by flange. Rota meter is used for water system and water treatment systems. Basic specification Size: DN15~DN150 (1/2 inch ~ 6 inch) Connection: Flange, Socket Body Material: AS, ABS, PVC Floater material: ABS C/W steel Measuring range: 5-50 l/h ~ 25-200 m3/h Accuracy: 4% Design pressure: 1.0Mpa (PN10 bar) Feature of flow meter All the parts that touch medium are made by plastic and stainless steel. Measureing range is widely. Union design is convenient to install and replace. Transparent body is convenient to observe the medium, and diagnosis problem. Suitable for vertical installation only
CP-S Synchroscope meter (analog synchroscope) shows the status of phase difference and frequency difference between two power generators or power systems. When the voltage and frequencies in between the power generator and network are consistent, the rotation of LED Roulette will be slowed down until the SYNC LED is on. Both systems can be synchronized and connect the generator to the power network.
Green-Tak digital LCD flow meter has unique design from other flow meters. The digital flow meter can be installed either on the counter or under the counter. The flow meter has a separated flow sensor that can be installed separately. The digital flow meter offers an accurate number for you to know when you need to change the water filter. The flow meter measures up to 99999 liters and can program to monitor 6 stages different filters volume setting, good design for monitoring water filter lifetime. Features Small and slim size. Big LCD display monitor, easy reading amount of water flow. Unique design: LCD digital flow meter can be installed on the counter or under the counter. (The flow meter and flow sensor can be separately installed). 3/8â?? Push-in quick connection, easy installation. Instant flow rate 0.3~4.6 LPM. The flow meter monitoring volume capacity is programmable from 100 to 99000 liters. Total Cumulative Volume Measures up to 99999 liters. Easy setting for 6 stages filters change notice. Great for monitoring water filter lifetime (counting down) and easy setting alarms for different filter change notice. Operates on 2pcs x AAA batteries. Good Battery lifetime. Low battery alarm. LCD Display auto turns ON when water flows out and will auto switch OFF once no water flow out for 1 minute. Memorization of flow volume capacity when power is off. Design & Manufacture in Taiwan.
Product Features: Online measurement of AC current below 60kV (operate with insulated rod above 600V). Features 1. The unique U-shaped opening structure realizes unobstructed measurement, which is particularly convenient for on-site measurement. 2. Suitable for high current test, range: 0.00A~9999A 3. It adopts wireless transmission mode, and the transmission distance is 100m. Data retention function, data storage function.
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30�ºC~160�ºC Turbidity 10000ppm and small bubble content Flow rate 0~�±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30C~160C Turbidity 10000ppm and small bubble content Flow rate 0~±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
1. Introduction KP-S3000 three phase energy meter test bench is a new generation, high precision energy meter calibration equipment. It uses the advanced technology and electronic components available in 90 decade . The test bench can be operated from embedded keyboard or operated from PC software. 2. Feature and function 1) Equipped with electronic phantom load power source, assuring high stability, security and large output capacity. 2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier. 3) Equipped with RS-232C interface, can be operated from software. 4) Test results can be saved to database, can be inquired from database and can be export to EXCEL file and then printed out.
Product Overview This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power. Product features The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user. With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW. the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter. Special universal interface for FC/SC/ST, easy to transformation. Optional auto off. Optional backlight display. Optional steady/flashing red light.
Yokogawa mechanical tension meters (yan tension meter) are for accurately measuring the running line tensions on all kinds of wires (cooper, metal, aluminum, plastic and etc). Yarns and fibers. With precise jeweled movement, Precision ball bearing mounted rollers and built-in damper, T1 tension meter completely eliminate the vibration and resistance caused by instrument itself, to provide reliable, accurate and steady tension reading as tension fluctuate. 1. Easy to read: 128*64 LCD display panel, clear display with high bright backlight. 2. Easy to operate: Simple and user friendly fuctional buttons. 3. Easy to hand: Clean Streamlined handle design. 4: Direct display of real time measurement. 5. Powered by replaceable lithium battery. 6. High precision, long service life 7. With memory back up function. Product specification of the tension meter Model Test range Minimum degree T-101 -02 0-20g 0.5g -05 0 -50g 1.0g -10 0 -100g 2.0g -20 0 -200g 5.0g -30 0 -300g 10.0g -50 0 -500g 10.0g T-102 -01 0 -1000g 20.0g -02 0 -2000g 50.0g Advantage of our coil winding wire tension meter 1. Precise tension scale 2. Competitive price 3. Excellent quality of tension meter 4. Various kinds of tension meter for choosen 5. Fast response speed 6. Professional tensioner engineering team 7. Good after-sales service
Ceramic Moisture Meter MS350 High frequency moisture meter MS350 is used for measuring moisture content of soil , chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry. Features: * It is portable, compact, easy to use and the moisture measurement readings are instant. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * The moisture meter operates by electrical resistance and has automatic temperature compensation. * Auto power off after 5 minutes from last operation. * Data hold function. Low battery alert. Specification: Display:4 digital LCD Measuring range :0-80% Operating conditions: Temperature:0-60 Humidity:5%-90% Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions: 140mmÃ?60mmÃ?22mm Needleï¼?230mm
Inductive Moisture Meter For Concrete Inductive moisture meter MS310 is used for measuring moisture content of wood ,Timber,paper,Bamboo,Carton ,concrete, textile and other materials.It applicable of woodwork,paper making , flakeboard, furniture ,building, timber traders and other relevant industry. Features: 1.1.It is portable, compact, easy to use and the moisture measurement readings are instant. 1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions. 1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient. 1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation. 1.5.Manual off at any time .Auto power off after 5 minutes from last operation. 1.6 Data hold function. Low battery alert. Specification Display:4 digital LCD Measuring range :0-99% Operation Condition: Temperature:0-60°C Humidity:5%-90%RH Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions:140mmÃ?60mmÃ?22mm Weight:119g (not including batteries) Material Species:20 kinds Guarantee:1 year
Ms350 Coal Moisture Meter High Frequency moisture meter MS350 is used for measuring moisture content of soil , chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry. Features: * It is portable, compact, easy to use and the moisture measurement readings are instant. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * The moisture meter operates by electrical resistance and has automatic temperature compensation. * Manual off at any time .Auto power off after 5 minutes from last operation. * Data hold function. Low battery alert. Specifications: Display:4 digital LCD Measuring range :0-80% Operating conditions: Temperature:0-60 Humidity:5%-90% Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions: 140mm60mm22mm Needleï¼?230mm
Ceramic Moisture Meter MS350 High frequency moisture meter MS350 is used for measuring moisture content of soil , chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry. Features: * It is portable, compact, easy to use and the moisture measurement readings are instant. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * The moisture meter operates by electrical resistance and has automatic temperature compensation. * Auto power off after 5 minutes from last operation. * Data hold function. Low battery alert. Specification: Display:4 digital LCD Measuring range :0-80% Operating conditions: Temperature:0-60 Humidity:5%-90% Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions: 140mmÃ?60mmÃ?22mm Needleï¼?230mm
1. DESCRIPTION The Model YE2730 d33 meter is a special instrument directly to measure piezoelectric constant d33 values of piezoelectric ceramics, polymers, and single crystals. This meter can also measure d33 value in various single crystal materials, such as lithium niobate, quartz, and tourmaline. This meter is capable of measuring d33 value over a very large range, at high resolution, and with a high degree of reliability. The measurement is quickly, and easily made with a minimum of training required. Specimens of a variety of sizes and shapes can easily be accommodated and measured. For example: d33 value of disks, blocks, rings, tubes and semispherical shells can be easily measured and displayed on the Model YE2730 d33 meter. Measuring d33 value is displayed on a 3 1/2 inch digital meter. This instrument is invaluable as a tool for quality assurance of piezoelectric materials, production in-line inspection, or for research applications. 2. SPECIFICATIONS D33 Range: x 1 range: 10 to 2000 PC/N x 0.1 range: 1 to 200 PC/N Accuracy: x 1 range: ±2% of d33 value in 100 to 2000 PC/N ±5% of d33 value in 10 to 200 PC/N x 0.1 range:.±2% of d33 value in 10 to 200 PC/N ±5% of d33 value in 1 to 20 PC/N Resolution:. x 1 range: 1 PC/N . x 0.1 range: 0.1 PC/N Force: Frequency: 110Hz Amplitude: 0.25N Polarity Indication: indicates polarity on upper face of test element in compression. (â??-â??sign means negative, no sign positive) Shunt Capacitance: 1 pF (for x 1 range) 0.1 pF (for x 0.1 range) Dimensions: .Force Head: 110x140mm, Chassis: 280x200x90mm Weight: Force Head: 3 kgs, Chassis: 2 kgs Power: 110/220V, 50/60Hz, 20W (In the instrument panel on the back of the switch are switch selectable.)
We can also provide the following products: Ge ultrasonic flow meter Panametrics ultrasonic flow meter Emerson ultrasonic flow meter Daniel ultrasonic flow meter Daniels ultrasonic meter Fuji ultrasonic flow meter Rosemount ultrasonic flow meter Siemens ultrasonic flow meter
Ge ultrasonic flow meter Panametrics ultrasonic flow meter Emerson ultrasonic flow meter Daniel ultrasonic flow meter Daniels ultrasonic meter Fuji ultrasonic flow meter Rosemount ultrasonic flow meter Siemens ultrasonic flow meter
Ge ultrasonic flow meter Panametrics ultrasonic flow meter Emerson ultrasonic flow meter Daniel ultrasonic flow meter Daniels ultrasonic meter Fuji ultrasonic flow meter Rosemount ultrasonic flow meter Siemens ultrasonic flow meter
Ge ultrasonic flow meter Panametrics ultrasonic flow meter Emerson ultrasonic flow meter Daniel ultrasonic flow meter Daniels ultrasonic meter Fuji ultrasonic flow meter Rosemount ultrasonic flow meter Siemens ultrasonic flow meter
