Slurry pump is a kind of centrifugal pump, which usually means that under the action of centrifugal force, the liquid is thrown from the center of impeller to the outer edge and obtains energy, leaving the outer edge of impeller at high speed and entering the volute pump shell. In the volute pump case, the liquid slows down due to the gradual expansion of the flow channel, and then transforms part of the kinetic energy into static pressure energy, which flows into the discharge pipe at a higher pressure and is sent to the required place.
Slurry pump, centrifugal pump, dredging pump, gravel pump.
The frame plates for type ZJ(R), ZJM pumps have replaceable wear-resistant metal liners or rubber liners.The impellers are made of wear-resistant metal or rubber.The frame plate liner and impeller for HH pump are adoptable of wear-resisatnt metal only. Wooden case or packing by customers' requirements
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range  Capacity 95~9000m3/h Head 6~205m Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150 Speed 740~2970r/min Inlet diameter 125~900mm  Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types  4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762. The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water. Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
What is Solar Water Pump : It's a Cost-effective, Reliable and Green solution for providing Water to remote locations where Electrical Supply is not available. It works by converting available solar energy to electrical energy and there by running motors coupled with pumps with that to lift underground water / to pump from sources like Underground water tanks ,Rivers and Lakes. Description : We deal with Solar pumps of various types ranging from 3 H.P. to 20 H.P. capacities Solar PV Cells / Modules are generally installed along with Water pump , Pump Controller / Drive (VFD) forms the whole system Remote operation through mobile application is also available Solar Modules can also be used to cover underground water tanks so that water temperature will also be maintained Types of Solar Water Pumps : Based on Function : Submersible Solar Pumps : These are designed to operate underwater They are used to Pump water from undergrounds/wells / underground water tanks Surface Solar Pumps : These are designed to operate on/ from the surface level of water These are generally used to pump water from shallow wells/rivers / lakes Based on type of Electrical Supply : AC Solar Pumps: These are designed to operate on AC (Alternating Current ) instead of DC (Direct Current ) These are generally used in applications where high flow rate and high-pressure output are required DC Solar Pumps: These are designed to operate on DC (Direct Current) These are generally used in applications where low flow rate and low-pressure output are required Applications : Agriculture Domestic Water Supply Community Water Supply Livestock Management Swimming Pools Hotels Fountains & Waterfalls Chiller Plants Ice Plants Concrete / Batching Plants Food Processing Plants Warranty Terms: Solar Modules come with a warranty of 15 years and an efficiency guarantee of 25 years Pumps and controllers warranty varies from 2-5 years based on the type and capacity of pumps
Type ZJ and ZJLR pumps are vertical, centrifugal slurry pumps submerged in sumps to work. They are designed for delivering abrasive, large particle and high slurries. These pumps have no need of any shaft seal and sealing water. they can also be operated normally for insufficient suction duties. Wet parts of Type ZJL pump are made of abrasion-resistant metal. All parts of type ZJLR pump immersed in liquid are lined with rubber our liners. They are suited to transport non-edge angle abrasive slurry.
Type ZJ and ZJLR pumps are vertical,centrifugal slurry pumps submerged in sumps to work.They are designed for delivering abrasive,large particle and high slurries.These pumps have no need of any shaft seal and sealing water.they can also be operated normally for insufficiend suction duties. Wet parts of Type ZJL pump are made of abrasion-resistant metal. All parts of type ZJLR pump immersed in liquid are lined with rubber our liners.They are suited to transport non-edge angle abrasive slurry. Different size wooden case
Main parameter: Capacity(flow rate): 86.4-198 m3/h Head: 9-52 meter Rate speed: 1000-2200 r/min Impeller diameter: 245 mm 1. Application: Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection. 2. Sealing type of slurry pump: Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements. 3. Structure of slurry pump: Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements. Meanings of the model: mh75c M---------wear-resistant high chromium alloy H---------heavy type slurry pump 75------- the pump press out opening is 75 mm C -------bracket style Wooden box
Series lmh slurry pump is mainly used for handling strong abrasive, high density slurries in the metallurgy, mining, coal washery, power plant, building materials and other industries etc. This series of slurry pumps have replaceable wear-resistant metal liners. Its wet parts are with throat bush, impeller, an be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pumps may be installed in multistage series to meet the delivery of long distance.
Product nameTgm-3e slurry pump TypeTgm Pump size4/3 Capacity126-252m3/h Head12-97m Allowable max. Power120kw Speed600-1400r/min Npsh2-5m Introduction£º Model explanation Tgm-4f T: our company logo G: high head M: metal lined 4: discharge size (inch) F: frame type with maximum power Introduction of centrifugal slurry pump ¡ª¡ª tgm series Tgm series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. This series pump may also be installed in multistage series The features of this kind of centrifugal slurry pump The frame plate liner and impeller for tgm series centrifugal slurry pump are made of wear-resistant metal. The shaft seals for the tgm series may choose gland seal or expeller seal. The discharge branch can be oriented to any of the eight positions to suit installations and applications. Application: They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps of this type may also be installed in multistage series. Tgm series slurry pump performance chart Pump modelAllowable max. Power(kw)Clear water performance¡¡ Capacity qHead h(m)Speed n(r/min)Max.Eff. ¦ç%Npsh (m)Impeller dia(mm) M3/hL/s Tgm-1c3016.2-34.24.5-9.525-921400-2200202-5.5330 Tgm-2d6068.4-13719-3825-87850-1400473-7.5457 Tgm-3e120126-25235-7012-97600-1400502-5508 Tgm-4f260324-72090-20030-118600-1000643-8711 Tgm-6s560468-1008130-28020-94500-1000654-12711 Note: quantity range recommended:50%q¡¯¡üq¡ü100%q¡¯(q¡¯appropriate to capacity at highest efficiency point). 2.Npsh:appropriate to point q recommended at highest speed. Exported wooden crate
Barrel pump for 200 litre metal barrel for solvents and oils
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656â??Technical conditions for centrifugal pumps-Class IIâ??and its efficiency indexes meet the standard of GB/T19762â??The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh waterâ?? Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range  Capacity 95~9000m3/h Head 6~205m  Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150  Speed 740~2970r/min Inlet diameter 125~900mm Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range Capacity 95~9000m3/h  Head 6~205m Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150  Speed 740~2970r/min  Inlet diameter 125~900mm  Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable � 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
can offer replacement KSB slurry pump impellers, the KWPK 65-315 impeller used on KSB KWP Non-clogging Centrifugal Pump, it is a closed non-blocking multi-vane impeller impeller. pumps are Horizontal, single-stage, radially split volute casing types with heavy-duty back pull-out, non clogging impeller design for industrial applications, they have either multi-vane impeller (K), free-flow impeller (F) or open multi-vane impeller (O), the pumps are not self-priming. K type impeller - Closed non-blocking impeller. It is suitable for transporting clean water, sewage, and solids-containing media. The medium should not contain solids that are particularly easy to adhere and easy to entangle (such as extra long fibers or coarse rubber particles).
High-Pressure ISW Series Pipe Centrifugal Water Pump Product Features: This product is of horizontal structure, used for conveying clean water and other liquid with similar physical, and chemical properties to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery in high-rise buildings, sprinkler irrigation in gardens, pressurized fire fighting, long-distance transportation, heating ventilation air conditioning circulation, bathroom, and other pressurized cooling, and heating water circulation and supporting equipment. ISW series single stage end suction centrifugal pump is an energy-saving pump. The advantage is hydraulic capability is distributed reasonably, wide option for user, conveniently check and repair, the efficiency and throw is up to advanced international level. This pump is suiable for industrial and city water supply, water drainage.
Working principle of CQB32-20-125F fluoroplastic magnetic pump The driving device of the magnetic drive pump is directly mounted on the motor shaft by the active magnet coupling, and the pump chamber is completely closed. The impeller with magnet on the pump shaft is indirectly driven to rotate through magnetic coupling, which is compact, safe and energy-saving. The solid and durable pump body structure is made of fluoroplastic, but the pump shell is made of metal, so the pump body can bear the weight of the pipeline and withstand mechanical impact. Application of cqb-f fluoroplastic magnetic pump It is widely used in petrochemical industry, acid and alkali production, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticide, dye, medicine, paper making, electroplating, radio and other industries. Service temperature
Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.
