Overview
Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering
Performance
 Capacity: 5-1650m3/h
 Head: 5-135 m
Product Features
Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
Product Description Pump type EA series single stage end suction centrifugal pump Design Standard European standard BS EN733/DIN24255 Structure Horizontal,Axial End-Suction,Single-Stage,Volute Casing,Back pull-out Discharge Size DN32~300mm Flange DIN2501 PN16 GB/T17241.6 PN1.6 Casing Cast Iron standard,Ductile Iron/ASTM304/ASTM316 options on request Impeller Brass standard,Cast Iron/ASTM304/ASTM316 options on request Shaft ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request Shaft Seal Mechanical Seal standard,Gland Packing options on request Flow Rate(Q) 4~1584m3/h Head(H) 2~150m Speed 1450/2900rpm(50Hz);1750/3500 rpm(60Hz) Max Temperature 85�°C(standard);105�°C(option on request) Working Pressure 1.0MPa(standard);1.6MPa(option on request) Conveying Medium Clean water or liquids similar to clean water in physical property Advantage Interchangeable parts,high effective,high performance,voice-saving, easily installed and maintained Applications Water supply and drainage,HVAC and Cooling Tower,marine-Ballasting&Bilge,booster and pressurization set,irrigation and agriculture,fire-fighting system,plants,mines,food and chemical industry(with stainless steel),etc.
HF Series is an single stage end- suction horizontal chemical centrifugal pump. it is in accordance with international standards ISO2858 and non-metallic Horizontal type pump technology combined with design and manufacturing. Pump body metal shell processing dovetail groove lined with FEP (F46), pump cover, impeller and the sleeve are embedded pieces of metal sintering suppression of the overall outsourcing of fluorine plastic. There are made of HT200 cast iron lining with Teflon PTFE / PEP(F46)/ PFA , impeller made by WCB wrapped by PTFE / PEP(F46)/ PFA, which grantee this type centrifugal pump could widely used in corrosive application and wear well. Mechanical seal is outside seal, stationary seal is alumina ceramic ( 99.9%)(or silicon nitride ,silicon carbide) , rotating seal is PTFE filling material or according to customer request. It is also can be made cartridge type mechanical seal. Advantage: High corrosive, well leak-proof, easy assembly and maintenance. Application Field : Acid pickling process Painting process Textile ,Dyes industry, etc Pharmacy & Pesticides Electroplating industry Chlorine water and waste water treatment Petroleum & Pharmaceutical Industry Chemical Industry Adding acid process Non-ferrous metals smelting of electrolyte transport Electricity Power Liquid Solution : Acid, alkali Salt solution Strong oxidant Organic solvents Corrosive slurries, solvents Hydrocarbons and other strong corrosive medium Ammonia water ion film caustic soda Waste water
Vertical slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range Capacity 95~9000m3/h  Head 6~205m Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150  Speed 740~2970r/min  Inlet diameter 125~900mm  Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable � 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
High-Pressure ISW Series Pipe Centrifugal Water Pump Product Features: This product is of horizontal structure, used for conveying clean water and other liquid with similar physical, and chemical properties to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery in high-rise buildings, sprinkler irrigation in gardens, pressurized fire fighting, long-distance transportation, heating ventilation air conditioning circulation, bathroom, and other pressurized cooling, and heating water circulation and supporting equipment. ISW series single stage end suction centrifugal pump is an energy-saving pump. The advantage is hydraulic capability is distributed reasonably, wide option for user, conveniently check and repair, the efficiency and throw is up to advanced international level. This pump is suiable for industrial and city water supply, water drainage.
Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes
Wholesale High Performance Eifel Brand Name Pipeline Pumps Product Description Pump type: EA series stainless steel single stage end suction centrifugal pump Design Standard: European standard BS EN733/DIN24255 Structure: Horizontal,Axial End-Suction,Single-Stage,Volute Casing,Back pull-out Discharge Size: DN32~300mm Flange: DIN2501 PN16 GB/T17241.6 PN1.6 Casing: ASTM304/ASTM316 Impeller: ASTM304/ASTM316 Shaft: ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request Shaft Seal: Mechanical Seal standard,Gland Packing options on request Flow Rate(Q): 4~1584m3/h Head(H): 2~150m Speed: 1450/2900rpm(50Hz);1750/3500 rpm(60Hz) Max Temperature: 85�°C(standard);105�°C(option on request) Working Pressure: 1.0MPa(standard);1.6MPa(option on request) Conveying Medium: water/liquid Advantage: Interchangeable parts,high-effective,high performance,voice-saving,easily installed and maintained Applications : Food and chemical industry,water supply and drainage,HVAC and Cooling Tower,marine-ballasting&bilge,booster and pressurization set,irrigation and agriculture,fire-fighting system,plants,mines,air-condition systems,etc.
Fzb series fluorine plastic linning self-priming pump Patent product, base on ihf centrifugal pump structure, installed the double volute self-priming pump casing on ihf pump, simple structure and for widely usage. Corrosion and pressure resistance, wet parts are made of corrosion resistant fluoroplastic, with these advantages, fzb pumps available to high corrosive applications. Pump base plate is made of metal; make the pump available to high pressure resistance applications. Easy for operating Developed for low sump application, pump installed above the sump or tank, which easy for operating, maintenance and repair. Min model no 25fzb 18l pumping flow capacity 3.6 m3/h, 18 meter pump head , equipped with motor power 2.2kw Max model no 100fzb 30l pumping flow capacity 100 m3/h , 30 meter pump head, equipped with motor power 18.5kw Model no 50fzb -30l 50 pump inlet diameter are 50mm Fzb single stage end-suction centrifugal pump 30 pump head 30 meter L pump connection by coupling Pump flow capacity 12 m3/h Motor 4kw Self-priming height 3 meter . Medium Acids & lyes Waste water Chlorine water Electrolyte Application Chemical industry Pesticide Acid and alkali making Papermaking Acid pickle process Electronics industry
End Suction Centrifugal Pumps