Type ZJ and ZJLR pumps are vertical,centrifugal slurry pumps submerged in sumps to work.They are designed for delivering abrasive,large particle and high slurries.These pumps have no need of any shaft seal and sealing water.they can also be operated normally for insufficiend suction duties.
Wet parts of Type ZJL pump are made of abrasion-resistant metal.
All parts of type ZJLR pump immersed in liquid are lined with rubber our liners.They are suited to transport non-edge angle abrasive slurry.
Different size wooden case
This pump is design in vertical type seal less Glandless pump with m
Vertical pump SEP series Motor Model:SEP-Vertical pump Materical:PP Power:5hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X1.5" Max.capacity:466l/min Max.head:20.5m Weight:31.0kg
Vertical pump SEP series Motor Model:SEP-Vertical pump Materical:PP Power:2hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X1.5" Max.capacity:350l/min Max.head:14.0m Weight:21.0kg
Vertical pump SEB series Motor Model:SEB-Vertical pump Materical:PP Power:2hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X3" Max.capacity:350l/min Max.head:13.8m Weight:30.0kg
Vertical pump SEB series Motor Model:SEB-Vertical pump Materical:PP Power:15hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:4"X4" Max.capacity:1750l/min Max.head:29.0m Weight:118.0kg
Name: Vertical Pump (VSX Series) Structure Type & The Application Conditions : API standard, VS1, VS2, VS3 structure, single-stage, two or more stages, cantilever, long axis of liquid formula, diversion shell type, the class type pump is mainly used in petrochemical, iron and steel metallurgy, electric power, water conservancy , paper and sewage irrigation areas, typically a power plant circulating water pump. Specification: Maximum Capacity Q: 30000/h Maximum Head: 200m Pressure: 4.0MPa Highest Obtainable Temperature: +90
Tobee 200SV-SP Vertical Pumps and spare parts: Pump casing SP20092A05, Pump impeller SP20206A05, Pump F.P.L. Insert SP20041A05, Seal parts: SP15116-1, SV025, SP20204, F8124, etc. Tobee�® 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Vertical Submersible Pumps with extended shaft directly goes into sump or tank mainly used for solvents with motor above the ground and the whole pumps below mounting plate inside the tank. Available in Metallic as well as Non-Metallic MOC.
Product Description The TS/TSR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the TS/TSR pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available. · TS pump - hard metal construction · TSR pump - rubber covered construction Structure: Fully Cantilevered – Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require. Impellers – Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings. Large Particle – Large particle impellers are also available and enable passing unusually large solids. Bearing Assembly – The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft. Casing – The metal pumps have a heavy walled abrasive resistant 27% chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures. Column and Discharge Pipe – The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. Upper Strainers – Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainers – Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles. Specification 300T-TS Vertical Pump Capacity (Q) : 288-1267m³/h Head (H) : 6-33m Power (KW) : 200KW Speed(N) : 350-700r Effiency : 50 Impeller Dia.: 610mm Impeller No.: 5 Outlet Dia.: 300mm Weight: 3940kg Slurry Pump Spares Pumps spare and parts material : High chrome alloy:A33, A05, A07, A49, etc. vertical slurry pump Natural rubber: R08, R26, R33, R55, etc. Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, and so on. Applications Mining Coal washery Power plant Metallurgy Petrochemical Building material Dredging Other industrial departments, etc. This series of pumps are preferred by many customers with special installation requirements and widely applied in pool. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
