Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data COLOUR : Grey FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Thinner 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data :- COLOUR :- Yellow FINISH :- Matt SOLIDS BY VOLUME :- 40 �± 3% THEORETICAL SPREADING RATE :- 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT :- Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) :- SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE :- BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data MIXING RATIO :- Base : Hardener (As per our recommendation) APPLICATION :- By Brush / By Conventional Spray THINNER :- Type 290 POT LIFE :- 3 hours min at 30�° C RECOMMENDED DFT :- 30-40 �µ. OVERCOATING INTERVAL :- MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY :- Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Add Thinner Type 290 into the mix, if required, depending on application method, and stir gently for few minutes. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Strain the paint through Nylon filter cloth of 200 mesh size and apply uniformly over the surface. All equipments used for above should be properly clean. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner and ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application :- Thinner : Type 290 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Type 290 Addition : Max 5% Nozzle Orifice : 0.28- 0.37 mm Nozzle Pressure : 1400-1800 p.s.i.
Painting aluminum trim coil at home and in workshop Painting aluminum trim coil at home and in workshop â??Painting aluminum trim coilâ?? is often asked about since aluminum siding and trim has been applied in decoration of so many houses in the past years. Learning about painting process in the workshop helps you to fully understand steps you should do at home to repair items made of trim aluminum coil. Before getting an aluminum trim coil roll painted, manufacturers would first clean the roll surface completely, either in physical or chemical ways. Sometimes mechanical equipment is necessary, too. The purpose is to remove any materials that might prevent the following anodizing step from going on effectively. A completely cleaned surface of aluminium coil will obtain a thick condense layer of anodizing film on the surface, but there will be micro holes on the surface, which should be concealed to make the film stronger and harder. To paint the coil, pvdf, pe and pvc paints are all applicable. These paints are divided into primers and finishing coats. Multiple painting produces lasting color coated aluminum coil in severe natural conditions. If you need to paint aluminum trim coil at home, the steps are similar in exception to the anodizing part. You should first scrub the aluminum part to be painted with soapy water by combining 1 gallon of warm water and 1/4 cup of dish soap in a bucket. Then then scrub down the entire aluminum surface to remove dirt and residue with the brush soaked with soapy water. Wipe the aluminum with a clean, damp cloth, and if there are still residues on the aluminium surface, brush it again until it gets fully cleaned. After the surface gets dry, you should begin your painting. Now the point is, do you need a primer? If you want your paint work last as long as possible, the answer is yes, for a primer functions as a secondary protection line of the aluminium trim coil. Make sure the primer you choose is safe for use on aluminum. Do not move on the next step until the primer is dry. Then dip a paintbrush into the paint, and brush the paint onto the aluminum using long, even strokes. Never allow anyone touch the aluminium until the paint gets dry.
Key Features: PU Coating: Our Oxford fabrics are enhanced with a polyurethane (PU) coating, which provides exceptional water resistance, making them suitable for use in various weather conditions. This PU coating ensures that water beads off the surface, keeping your belongings or equipment dry and protected. Abrasion Resistance: Our fabrics are engineered to withstand wear and tear. The Oxford weave, known for its strength, ensures your products remain in excellent condition, even after prolonged use. Tear and Puncture Resistance: You can trust our Oxford fabrics to protect your belongings. They resist tears and punctures, making them ideal for heavy-duty applications. UV Resistance: Sun exposure can cause fabrics to fade and deteriorate over time. Our Oxford fabrics are designed to resist UV damage, ensuring long-lasting color vibrancy and durability. Easy to Clean: Maintaining our Oxford fabrics is a breeze. Most dirt and stains can be easily wiped away with a damp cloth or sponge, allowing for stress-free maintenance. Applications: Bags: Create stylish and durable bags for various purposes, from backpacks and duffels to messenger bags and more. Our PU-coated Oxford fabrics ensure that your bags are both functional and fashionable. Coverings: Whether you need equipment covers, furniture protection, or grill covers, our fabrics are up to the task. They shield your valuables from the elements, keeping them safe and dry. Tents: Construct reliable and weather-resistant tents for outdoor adventures. Our fabrics provide the necessary durability and weatherproofing to make camping a comfortable and enjoyable experience. Outdoor Gear: From rain jackets to windbreakers, our fabrics can be used to create outdoor gear that stands up to the demands of various outdoor activities. DIY Projects: Our Oxford fabrics are perfect for a wide range of do-it-yourself projects, including aprons, tablecloths, and more. Let your creativity run wild with our versatile and durable materials.
SAFFRO'S aura Premium Gloss Enamel gives smooth,hard & glossy finish.Its dry film has good adhesion to the surface.It has very good flow and brushability. aura Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily RECOMMENDED USE It is applied on furnitures,drums,barrels,household products,elecrical motors,doors,windows and variety of other surfaces which are not subjected to outdoor exposure FINISH :smooth and glossy COLOR As per shade card Including White and Black. COVERING CAPACITY :7 to 9 sq.mt/lit/coat at 30 to 35 micron dry film thickness,depending (ON SMOOTH MILD STEEL SURFACE) upon shades and surface. DRYING TIME :Surface dry - Less than 3 hours. :Hard dry - Less than 15 hours. Second coat application period -After 10 hours Above all properties depend upon temperature and humidity. FLASH POINT :Above 30* C (86 *F) THINNER RECOMMENDED :SAFFRO Synthetic G.P Thinner METHOD OF APPLICATION :By Brush or spray at a pressure of 40 to 50 P.S.I RECOMMENDED PRIMER :For Metal - SAFFRO R/O Z/C metal primer - SAFFRO Zinc Chrome primer yellow For Wood - SAFFRO Wood primer white For Plaster - SAFFRO Cement primer (oil base) DIRECTION FOR USE Remove dust,grease,oil,moisture,rust and other loose flakes etc.After priming the surface with recommenden primer with over night drying & sanding with emery paper,apply SAFFRO SHINE synthetic enamel using recommended thinner.Allow first coat to dry for minimum 10 hours before applying second coat.Stir the content thoroughly prior to use PACKING : 20 Ltr, 10 Ltr,4 Ltr ,1 Ltr, 500 ml,200 ml,100 ml,50 ml.
Product Data Sheet GENERAL DESCRIPTION An easy-to-use, water-based primer specifically formulated to �¢??lock-out�¢?? corrosion on a wide range of metals. Applied correctly, is guaranteed for years. USES Suitable on sheet metal, castings, wrought iron, TNT Bar, steel Bar and steelwork. This product is not recommended for automotive use. COLOURS Available in natural green. SIZES Available in 4 litre,10 litre and 20 litre COVERAGE Up to 14 square metres per litre depending upon surface porosity and application method. APPLICATION Roller, brush, dip or airless spray. Provide adequate ventilation during use. DRYING TIMES Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30�?�°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10'c OR ABOVE 45C. DANGEROUS GOODS CLASSIFICATION Not classified as Dangerous Goods. SURFACE PREPERATION Previously Painted Surfaces : Scrape off loose and flaking paint and make sure the remainder is firmly attached. Sand glossy surfaces and enamels thoroughly and wipe clean. Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer. TNT BAR,STEEL BAR AND IRON: Remove all grease, dirt and other surface contaminants.Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust with. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer
Description Two component air drying aromatic polyurethane finish coating Recommended Use :- It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 30C DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish. FEATURES :- WALL GUARD PUTTY 1. Provides smooth and uniform finish to rough plasters 2. Good Workability 3. Does not require curing with water 4. Good water resistance 5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength 6. Controlled water vapour permeability 7. Excellent abrasion resistance 8. Resists growth of algae and fungi on wall 9. Good intercoat adhesion to emulsion paints RECOMMENDED APPLICATION :- It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc PRODUCT TECHNICAL DATA :- COLOURS : White FINISH : Smooth and Matt COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat (It may vary from the quoted coverage to factor such as method and condition of application and surface roughness) DRYING TIME : 6-8 HOURS GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable SUITABILITY OF THINNER PAINT Use within 24 hrs. SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. PERFORMANCE DATA :- ABRASION RESISTANCE : Excellent WATER RESISTANCE : Excellent SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats. 1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties. 2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc. PRODUCT TECHNICAL DATA No COLOURS White 1. FINISH Smooth and matt 2. COVERAGE 1 coat: 90-100 sq.ft/ltr 2 coats: 60-70 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS NA 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Lint Roller's Specification:ItemLint Brush Pet Hair Lint RollerWidth10cm or customizedLayers12,20,30,45,60 and 90layersGlueSpecial hot meltHandleTransparent and opaque handle are available OEM orders are welcomePaperOne side is coated special adhesive for cl handle color eaning and other side is silicon release paper, Glassine release paper, masking tape and general paperUsageCleans out dust, mote dirt, broken fibres, fine hair and scraps of paper, dandruff on clothes, cars, sofas, carpets, blankets, curtains and beds;PlaceSuitable for home, hospitals, officesPackingPaper card, blister card or double blister card availableFeature1.Household cleaning tool with paper coated special adhesive2.Electric supply and water are not required3.Nonpoisonous and odorless4.Small, exquisite and convenient to carry5.High viscosity sticky paper tissue6.RefillableMOQ10000 PairsLint Roller's Instruction :Dust Roller Refill with Spiral/Straight Cutting Sheet, Removes Lint, Pet Hair, Dust, and DandruffDetailed Description Material: Paper baseCoated special treated adhesive layerWith 20, 40, 60 and 90 layersLayer: Spiral sheet or straight cutting sheetCardboard tube length: 10cmThe tube inner diameter: 3.75 to 3.85cmPlastic handle: 19 to 23cm RefillableStrong sticky and nice glueQuickly and effectively removes lint, pet hair, dust, dandruff from clothing, sofas and carUsed for family, hospital, office and other special placesSuch as railway, engine room, computer room, lab and so onThis product is made by paper base and coated special treated adhesive layer.It is very convenient and widely used.Used for wiping off hair, dust and scurf on clothes, cars, sofas, blankets, curtains and beds.Small, exquisite and convenient to carry.without electricity .No noise and no electromagnetism disturbed.Strong sticky and nice glueCleaning tapes can be used for families, hospitals, offices and other .special places (such as railways, engine rooms, computer rooms, labs)It is a green product.It can stick the lint from pets.Pictures:About Our Company:Virson Commodity Co.,Ltd manufacture and exported to lint rollers for 4 years, produce different design rollers, OEM custom printing and package is welcome. With the tenet of"Focus and Bset Servie for clients",we are committed to supply high quality lint roller and remover products to customers,and continue developing innovoative products for different demands. Along with outstanding service and teamwork,we assure the most prominent reliability,quality and creativity to our clients
Wood Log, Logs, Timber, Lumber, Sawn Timber, Wood Chips, Wood Sawdust, Wood Pellet, Wood Charcoal, Plywood, Finger Joint Board, Chipboards, Particle Boards,lvl, Mdf, Wood Pallet, Leather, Shoes, Leather Shoes, Sandals, Skin Care, Kitchenware, Seafood, Rice, Tapioca, Cassava, Cashew, A4 Paper, Coffee, Soybean, Corn, Fruit, Salted Bovine, Hides, Wet Blue Leather, Flange, Valve, Handicrafts, Ginger, Rubber Slipper, Tomato Sauce, Ketchup, Pineapple, Mango Juices, Pepper, Lime, Coconut, Duran, Cosmetics, Gold, Gloves, Garment, Socks, Suits, T Shirt, Clothes, Fashion, Pet Supplies, Pet Craft, Pet House, Cat Tree, Cat Scratcher, Salted Bovine Hides.
Used clothing, used shoes, used hang bags, wiping rags..Traders
Plastic Broom Sticks, Wipers, Mops & All Brush Items..Manufacturers.
Cotton wiping rags, duster cloth, cotton clips, cotton waste, leather goods.manufacturing
Welcome to the forefront of sustainable exports! BACK proudly presents an extensive range of Textile Waste, meticulously curated to meet diverse industry needs while championing eco-conscious practices. Our offerings encompass an array of premium quality textile waste: 1. BACK Hosiery/Knit Clips 2. BACK Woven Clips 3. BACK Denim Clips 4. BACK Ecru Hard Waste 5. BACK Optic Hard Waste 6. BACK Selvedge 7. BACK Jeans/Denim Blue Yarn Waste 8. BACK Denim Selvedge Yarn Waste 9. BACK Polyester Yarn Waste Each category represents our commitment to sustainability, offering textile waste solutions that uphold quality, reliability, and eco-friendliness. At BACK, we redefine the value of textile waste by providing a diverse range of products that cater to various manufacturing and recycling needs, ensuring that every piece contributes positively to the circular economy. Join us in our endeavor to transform waste into a valuable resource while setting new standards for sustainable textile exports.
Welcome to the world of exquisite craftsmanship and timeless elegance curated by BACK! Our brand takes immense pride in presenting an exclusive array of Leather Accessories and Handicrafts that transcend mere utility to become statements of sophistication and finesse. Indulge in the allure of our meticulously crafted Ladies' Bags, designed to complement the modern woman's style with a touch of sophistication and functionality. Dive into our collection of Laptop Bags, a seamless fusion of practicality and elegance, ensuring your devices travel in both safety and style. But that's just the beginning - our repertoire extends far beyond, offering a myriad of other leather accessories meticulously designed to elevate your everyday experiences. At BACK, each creation is a testament to our commitment to excellence, crafting products that seamlessly blend style, functionality, and durability, setting new standards in the world of leather goods and handicrafts.
Welcome to BACK's world of Jute Goods, where quality and versatility converge to redefine excellence in export offerings! Our extensive array includes a diverse range of Burlap/Hessian Jute Bags and Cloth, available in any size or weight, boasting Full Bright Quality that exudes sophistication. Immerse yourself in our collection featuring Hessian Bags, including those treated with vegetable oil, enhancing both durability and appeal. But that's just the beginning! Explore our Sacking Jute Bags meticulously designed for coffee, cocoa, hazelnuts, maize, rice, and various food grains, available in Food Grade (Vegetable Oil treated) or Normal Oil variants. Our commitment to quality extends to Jute Yarn/Twine, offering a spectrum of choices - CRM, CRT, CB, and Hessian Quality, each boasting 100% Tossa composition, minimal oil content, and meticulously designed specifications. Dive into our selection of Jute Sandbags, precisely crafted in size and weight to meet diverse needs, and packaged for convenience and durability. Our inventory also includes Jute Filasse/Sliver, adding a touch of finesse to our comprehensive lineup. As an eco-conscious offering, indulge in our Reusable Gift Bags - premium Burlap Gift Bags meticulously designed with drawstrings, ideal for various occasions like weddings, parties, and more. At BACK, our dedication to delivering premium Jute Goods echoes through every meticulously crafted product, offering not just items, but a testament to unparalleled quality and versatility in the realm of exports.
RMG ( Fresh Order ) Welcome to the realm of T-SHIRT manufacturing, where BACK stands at the forefront, revolutionizing the landscape on a small-scale yet impactful level. With a robust capacity of 60,000 pieces per month, we redefine excellence in crafting t-shirts that resonate with style, quality, and innovation. At BACK, every stitch tells a story of precision and dedication, reflecting our commitment to delivering premium-grade t-shirts tailored to your exacting standards. Embrace the fusion of creativity and craftsmanship as we pave the way for small-scale manufacturing, redefining industry standards one t-shirt at a time. RMG ( Stock Lot ) Greetings to all seeking premium Ready Made Garments! BACK takes immense pride in presenting a unique facet of export excellenceâ??our specialized focus on Stock Lot, leftover, Surplus, and Order Cancellation products of renowned Branded Garments. Our commitment to quality and diversity shines through as we curate a collection that redefines expectations in the export domain. At BACK, we breathe life into these exclusive offerings, ensuring each garment retains the esteemed quality and brand value you expect. Explore our treasure trove of Ready Made Garments, where surplus meets sophistication, cancellations transform into coveted collections, and stock lots embody unparalleled excellence, all meticulously curated by BACK for the discerning global market.
Used clothing, used shoes, used purses & bags, wiping rags.
Household and Cleaning Tools Like Brushes, Brooms, Mops, Squeegees, Buckets..