Description
Two component air drying aromatic polyurethane finish coating
Recommended Use :-
It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits.
Physical Data
COLOUR : Assorted shades
FINISH : Glossy / Semi glossy / Matt SOLIDS BY
VOLUME : 40 �± 3% (Depends on shade) THEORETICAL
SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30
FLASH POINT : Base : Above 23C Hardener : Above 30C
DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding.
Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendation)
APPLICATION : By Brush / By Conventional spray / By Airless Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30 C
RECOMMENDED DFT : 30-40
OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours
COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Produce formation: Two component paint, group a is by senior acrylic resin, pigments, additives and solvent, and isocyanate as group b. Product features: .Good fullness, high gloss, good decorative performance, .Excellent weather resistance, light color retention .Excellent chemical resistance, smoke resistance, water resistance, oil resistance, film tough .Good resistance to impact and abrasion resistance, .Good physical and mechanical properties Technical data: Color and appearance of paint film gray, film formation Viscosity (stormer viscometer), ku 60 Fineness, um 40 Gloss high Solids content, % 55-65 Flashing point, â?? 27â?? Dry film thickness, um 60 Drying time (25â??), h surface dry2h, hard dry24h Hardness, class 0.5 Adhesion (zoned method), class 1 Impact strength, kg, cm 50 Flexibility, mm 1 Alkali resistance 48 hrs Water resistance 48 hrs Using: Applicable to steel structure of the large bridge, port machinery, engineering machinery, containers, ships, water and electricity station, substation, require long-term protection against corrosion decorative topcoat. Packing: Paint:18 kg/bucket curing agent: 3 kg/bucket.
2Pk Acrylic Exterior Polyurethane is an exterior quality long life polyurethane lacquer based on acrylic base & aliphatic isocyanate hardener. The product with beautiful surface quality is highly resistant to aggressive physical & chemical environment stresses in conformity with DIN 68861-1B. Presence of aliphatic isocyanate, UV inhibitor & other special additives make it non-yellowing, non-chalking, resistant to termite & other microorganism & flexible enough to withstand woodâ??s dimensional variation. Maxiwood Acrylic Polyurethane is available in pigmented & lacquer (gloss/matt/silkmatt) form. Itâ??s water like appearance enables itâ??s use over light colored wood.
Description Two-component acrylic aromatic polyurethane finish coating Recommended Use :- This product is a topcoat along with recommended undercoats for use in chemical plants, fertilizer plants, petrochemical and pharmaceutical complex, power plants, cement plants, steel plants, heavy chemicals and off-shore and on-shore industries. It is recommended for very high chemical resistance and for areas not exposed to direct sunlight. Product is also recommended for application over suitable primer for OEM industry. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 ± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 µ FLASH POINT : Base : Above 23 C Hardener : Above 23 C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 DAYS. SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation The surface of primer or intermediate coats, over which this product is applied as topcoat, should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Supplier: Paint, polyurethane sanding sealer, cellulosic topcoat varnishes, hammertone decorative paints, malenized resins, polyurethane topcoat varnishes, cellulosic primers, road marking paints, epoxy undercoat, polyurethane primers, cellulosic topcoat paints, alkyd resins, epoxy topcoat, polyurethane topcoat paints, wood stain colourants, polyester resins, cracked paint, cellulosic sanding sealer, transparent paints, melamine, car paints
Buyer: Tofa, coconut fatty acid, soya bean oil, pentaeritritol, benzoic acid, hardener, nc chips, solvents, zn stearate, tdi, alifatic hardener, aromatic hardener, transparent pigments
Dyo pu topcoat fd 2k polyurethane fast drying(fd) alkyd based car repair and vehicle paint. Has gloss, semi gloss, gloss retention, high mechanical and chemical resistance and high flexibility. Has resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Packaged in 18 kg can
LTD is a top Rubber Air Hose, PVC Air Hose, Hybrid Air Hose, Twin Welding Hose, Garden/Water Hose, Jackhammer Hose, Pressure Washer Hose, Hose Reels and Air Accessories manufacturer in China. With new products - Hybrid PU Air Hose, which combines the both characteristics of Hybrid Hose and Polyurethane Hose, very Lightweight and Durable, keeps extreme Flexible in -58�°F weather conditions. Founded in 2000, we specialize in HOSES & Air Accessories, We have an annual production capacity of 30,000,000 meters, and annual revenue of around US$ 10~30 Million. We have been exporting to North America since 2005, and our clients include Home Depot, Lowe's, Tractor Supply Co., Dewalt, Harbor Freight Tools (CPI), Plews, Wood Industries, Astro Pneumatic, Grip on tools, Forney Industries, Canadian Tire Corporation, Princess Auto, Toolway Industries, Prime line Tools, New-line, Samona, and many others. We also have a number of clients in Europe.
A wide range of shades & finishes are available in the following chemistry Pure Epoxy PVDF Epoxy Polyester (Hybrid) Nylon Pure Polyester Polyurethane
Commercial grade two components Polyurethane Topcoat, formulated with solid content combined with fast drying, good transparency, flow, and leveling characteristics, provides the excellent equalization of the matt effect. Combined with the high mechanical resistant and soft slippery touch that enhances the overall beauty and feasibility of the finishing product. USES For interior use on all furnishings as wardrobes, closet, paneling, doors, windows, frame, and casting, etc. The overall characteristics such as extensibility, Matt effect equalization, transparency and resistance to polishing have been developed to the maximum which in turn enables the product to have almost unlimited possibilities in the furniture industry.
SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals. 2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation. 5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals. 6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.