Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit. Operation principle: Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency. Technical data: Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden Type: ECO 5000 VS-HP, R407C Year made: 2003 Evaporation capacity: 5000 liters / 24 hour (pure water) Electricity consump.: about 0,15 kWh / liter pure wateri) Control unit: Siemens Micromaster 420 Compressor: Bitzer Kuhlmachinenbau GmbH, Compressor type: 6G-40,2 Compressor capacity: 126.8 m3/h, 19/28 bar Refrigenerant: R 407 C Main dimensions: 2.8 m x 1.3 m x 2.9 m Weight: 1500 kg.
FAKT BP 5000 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier. Technical Data: Drive:...................................35 kW/400 V/50 Hz Pressure:..............................600 kN/m¦ Volume/stroke:....................1,3 m¦ Cycle time:...........................19 sec Feed opening:......................1350 x 1160 mm Bale dimensions:.................1100x750x600 .............................................1.200 mm No of tightening wires:..........4 Press length:.........................6850 mm Press width:..........................2650 mm Press height with funnel:.....2150 mm press height complete:........3700 mm Weight:..................................14600 kg Basic equipment - Touchpanel - photocell control - bale longimetry - fully automatic three-sided duct cross sectional adjustment device - free pitching device - fully automatic binding - 4 pieces wire coil stands large - 4 pieces wire bags for 40 kgs spools - electric control ready to plug in (SPS Siemens) engineering und documentation space assignment plan plans of electric control operation manual security instructions
Drum and Container Filling Line, Semiautomatic YOC 2006 The line is designed for filling both 1000 liter IBC’s and normal 209 liter drums / barrels. It consist of straight chain driven heavy duty roller conveyor which is carrying IBC’s or a standard pallet loaded with four drums / barrels through the filling process and conveying them for further storing. The filling machine is semiautomatic coarse-and-fine filling station; first is programmable volumetric and then fine filling with integrated weighing system. Cap closing / bunging and sealing will be made manually but a machine aided. The station operation is controlled by Siemens S7C programmable logic. The line is manufactured in 2006 by Finnish company “Insinööritoimisto Jyrki Kekälainen” who is specialized supplying automation solutions filling and packing applications. Operation description: The operator lifts the empty containers on the conveyor (open the cap of container), the container will move into filling machine and it will be filled automatically with 2 "and 1 / 2" valves, coarse-and fine-filling. After filling the container will move out of the machine and the operator will fix the label and close the cap. After the filling station there is ~16 m long puffer conveyor for the filled IBC`s, where a fork lift will pick up the IBC`s In drum filling the operator lifts the empty drums on pallet (open the caps). Then he lifts the pallet on the conveyor. In the machine there is an extra filling lence for the drums. The drums are filled on the weighing system of the machine which is controlling the filling of each barrel. After the drum is filled the operator move the lence into second drum and machine start to fill it. After all drums are filled the pallet will move out of machine and the operator will close the caps and fix the seals and labels. Technical data: Manufactured in: 2006 Suitable for: Standard IBC and Drums Max filling weigh: 1500 kg Filling accuracy: 0.5 kg Filling capacity: 7 IBC/hour or 35 Drums (209 liters) / hour Roller conveyor type: Chain Driven, Galvanized Roller conveyor length: Approx 16 meters Roll diameter: 80 mm.
Diameter scope: 16-800mm Introduction: Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe. This pipe extrusion line mainly includes conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket. Conical Twin-Screw Extruder: It equipped with forced fixed-quantity material feeding system, automatic temperature control system, vacuum exhaust system and automatic speed control system. This structure assures accurate controlling for the material temperature, plasticization stability and greatly improving production speed. The main motor is direct convertor or frequency convertor. Motor output torque stability which can achieve step-less speed regulation. PVC Extrusion Molds: Material is high quality 40Cr. Molds surface is dealt with polishing and chrome plating. The melt has low pressure. Extruding at high quantity, the die head still maintain low temperature. Vacuum Calibrating Water Tank: The material of body is high hardness and good quality stainless steel board. It is high-pressure resistance, corrosion-resistance and two-stage for large diameter pipe. Stainless steel float adjusts water level and the structure is simple and practical. Electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted three dimensions. The moving from front to back adopt cycloid reducer drive and up & down and left & right adopt screw adjustment. Water Spray Cooling Tank: The body is made of stainless steel and the shade is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted up and down. There is roller device in the tank. Haul-off Machine: It adopts frequency conversion approach. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic flexibility clamping. The bearing has special structure which can effectively reduce the installation error. The machine has¡¡ã V ¡¡Àtype high friction coefficient rubber. Cutting Machine: It is planetary cutting for large diameter. The blade takes rotation and cutting part and inserting blade part take revolution. It has angle cutting structure, pneumatic aluminum half clamping and cleaning device. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Operation is simple. Main Technical Parameter: Model Pipe Diameter (mm) Extruder Speed (m/min) Max.Output (kg/h) SJPGZ-50 Ø20-Ø50 SJSZ-51/105 1-12 150 SJPGZ-250 Ø50-Ø250 SJSZ-65/132 0.5-5 300 SJPGZ-315 Ø110-Ø315 SJSZ-80/156 1-3.6 420 SJPGZ-400 Ø200-Ø400 SJSZ-80/156 0.2-2 420 SJPGZ-630 Ø315-Ø630 SJSZ--92/188 0.08-0.8 750. Suit for shippment.
Anderson Level Transmitter A&S Transmitter Co., Ltd. supplies all models of Anderson Level Transmitter Anderson Level Transmitter Anderson SL Hydrostatic Level Transmitter Anderson LN Potentiometric Level Transmitter Anderson NSL-M Potentiometric Level Transmitter Anderson HB Mini level transmitter Anderson LB LL Point Level probe Anderson LD Level Transmitter Anderson TDL DP Level Transmitter Anderson SX Level Transmitter Anderson LA Level Transmitter Other brands of Level Transmitter we can offer: Siemens Level Transmitter Honeywell Level Transmitter Rosemount Level Transmitter Fuji Level Transmitter ABB Level Transmitter Danfoss Level Transmitter Endress Hauser Level Transmitter Krohne Level Transmitter Foxboro Level Transmitter Kubler Level Transmitter Dwyer Level Transmitter Fisher Level Transmitter Anderson Level Transmitter Gems Level Transmitter Omega Level Transmitter WIKA Level Transmitter MTS Level Transmitter ENRAF Level Transmitter Vega Level Transmitter K-TEK Level Transmitter Magnetrol Level Transmitter Flowline Level Transmitter Ametek Level Transmitter Killer Level Transmitter Burkert Level Transmitter L&J Level Transmitter APG Level Transmitter Taylor Level Transmitter IVECO Level Transmitter Kele Level Transmitter Emerson Level Transmitter SOR Level Transmitter Orion Level Transmitter Kobold Level Transmitter TI Level Transmitter Broil senostk Level Transmitter Princo Level Transmitter ABM Level Transmitter Mercoid Level Transmitter Intempco Level Transmitter Milltronics Level Transmitter Bailey Level Transmitter Masoneilan Dresser Level Transmitter Hawk Level Transmitter Mobrey Level Transmitter Daehan Level Transmitter Bindicator Level Transmitter Ohmart Level Transmitter PMC Level Transmitter Hayward Level Transmitter Except the level transmitter, A&S Transmitter Co., Ltd. also can provide below products: pressure transmitter,flow transmitter,temperature transmitter,differential transmitter,level gauge and flow meter. Should you have any questions,please feel free to ask us. We are very pleased to help with the quotation.
BS42 full automatic Concrete paver and block making machine It is an automatic machine with 100-160 bar pressure range which the main machine and the batching plant is controlled by plc. Product picking robot is used in this facility. For this reason the products which are produced needs to be dried longer time and the quantity of wooden pallets should be thought according to this situation. There is also options to carry the products with forklift or automatic system robot carrying cars. The batching plant which is used for dry mortar can also be used for wet mortar as a second option. Fast service, spare parts guarantee Appropriate material usage in the norms of din and tsek standards Easy usable program selection Auto/manuel choice Authorization certificate at the end of training period Stop, standby and continue production from the point where was left. 2 years mechanical parts guaranteed Technical specifications Vibration impact force: 32000 kg Vibration power: 48 kw Vibration cooling capacity: 11000 m3/h Hydraulic cooling capacity: 120 lt/min Pump power: 31, 5 kw Robot pump power: 15 kw Picking robot motor power: 15 kw Machine size: 2, 1 x 8, 5 x 2, 5 m Plc: contactor: moeller thermic siemens touch screen Interlock paver mould: oxygen cutting and cnc processing Thick mortar band: 3 kw Thin mortar band: 3 kw Thick material transport band: 4 kw Thin material transport band: 4 kw Bs1500 mixer: mixing capacity : 1500 dm3 60 kw Bs500 mixer: mixing capacity : 500 dm3 15 kw Thick material sand bunker: 20 m3 x 3 pcs. Thin material sand bunker: 8 m3 x 2 pcs. Thick material weighing band: 5, 5 kw Thin material weighing band: 3 kw Thick mortar cement weighing volume: 600 kg Thin mortar cement weighing volume: 300 kg Cement silo 50 tons: filter: 24 m2 wam, safety valve: wam Cement screw 8m: motor power: 4kw, tube diameter: 219mm Water weighing scale: 300 kg. 20"-40" HC containers.
CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Tsq 2180 CNC deep hole boring machine Range of drilling hole dia : 40- 100mm Range of boring hole dia : 40- 800mm Sleelve boring hole dia : 140- 400mm Max boring depth : 3-12m one sepcification every each one meter Center height from horizental rail to spindle center : 1000mm Headstock spindle hole dia : 100mm Front spindle taper hole : 120mm, 1:20 Spindle rotation speed , steps : 16-270r/min 12steps Main motor : 45kw Feeding speed : 5-500mm/min ac servo stepless Carriage rapid moving speed : 2m/min Clamping dia of workpiece : 120-800mm Drilling bar box spindle hole dia : 75mm Front spindle taper hole of drilling bar box : 85mm, 1:20. Drilling bar box motor : 30kw Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps Feeding motor : 7.5kw ac servo stepless Pulling plate fast motor : 5.5kw Cooling pump motor : 5.5kwx4 4groups Hydraulic pump motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Volume of cooling system : 100, 200, 300, 600, 900l/min. Wooden packing.
Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops HDPE/MDPE water supply pipe production line and gas pipe production line by itself. It has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket. Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler. Main Technical Parameter: Model Pipe Diameter (mm) Extruder Speed (m/min) Max.Output (kg/h) Total Power (kw) Dimension L¡ÁW¡ÁH SRQG-63 Ø20-Ø63mm SJ-65¡Á30 1.5-12 120 65 30 ¡Á2.2 ¡Á2.5m SRQG-110 Ø20-Ø110mm SJ-90¡Á30 2-12 220 110 32 ¡Á2.2 ¡Á2.6m SRQG-160 Ø63-Ø160mm SJ-90¡Á30 1.3-6 300 150 32¡Á2.2 ¡Á2.8m SRQG-250 Ø75-Ø250mm SJ-90¡Á33 0.7-4 400 200 40 ¡Á2.2 ¡Á3m SRQG-315 Ø110-Ø315mm SJ-90¡Á33 0.5-3.5 400 200 40 ¡Á2.2 ¡Á3m SRQG-400 Ø160-Ø400mm SJ-120¡Á30 0.3-2.4 550 280 42 ¡Á2.2 ¡Á3m SRQG-500 Ø200-Ø500mm SJ-120¡Á30 0.3-1.9 700 360 42¡Á2.3 ¡Á3.5m SRQG-630 Ø315-Ø630mm SJ-120¡Á33 0.2-0.7 800 450 50 ¡Á2.3 ¡Á3.5m SRQG-800 Ø400-Ø800mm SJ-120¡Á33 0.1-0.6 1100 560 50¡Á2.5 ¡Á4m SRQG-1200 Ø630-Ø1200mm SJ-150¡Á33 0.05-0.5 1300 720 65¡Á3¡Á4.5m Suit for shippment.
Indication AD16-22D/R32S/AC380V Deyang YOYIK is a strong technical force, first-class product quality, brand reputable large-scale mechanical and electrical equipment Limited. Company products covered a wide range of products sold worldwide, a number of users trust. Acting foreign first-class brand, EATON VICKERS, star, and so on products. Guarantee genuine, the spot sale. #DF-Indication AD16-22D/R32S/AC380V-DF thermocouple WRNK2-231-S19 Displacement Sensor (LVDT) for RSV ZDT300B Fin radiator PC2600-32/535 Cảm biến nhi�t �?� WZPM2-08-44-M18-8 LIMIT SWITCH 802T-AP Intelligent temperature monitor WK-P2T(TH) Speed sensor SZCB-01-16L Sensor DF310580-90-02-01 Hydrogen leakage probe NA1000D-II MAIN IGNITOR FLIXIBLE CABLE XDL-3000 speed meter MSC-2A non contact linear position sensor TDZ-1E-023 0-215 Bolt electric heating rod ZJ-16.5-12 Temperature Sensor Z1201418 16 relay modules 3500/33-01-00 Eddy current sensor extension cable DS821.ec100/40/0 circuit board ME5.530.004 dc lvdt TDZ-1E-42 Guide Vane Opening DYK-11-1015 Eddy Current Sensor PR6422/001-010 linear position control FRD.WJA2.601H magnetic tachometer working principle G-100-02-01 Travel switch WLCA12-TH-N CAPACITOR START ASYN MOTOR YC8024 Eddy Current Sensor PR6424/001-101 LVDT position sensor 1500TD Magnetic Rotational Speed Sensor CS-1 G-065-02-01 Maintenance free battery 6-QW-200 (CCA-1000A) digital servo control card TDMSC10 Siemens PLC module 6ES7516-3UN00-0AB0 Position sensor 6000TD-10-01-01 LVDT transmitter XCBSQ-02/200-02-01 Exciter Rectifier Cabinet Interface CIN Card 3BHB005922R0001 LVDT Sensor TDZ-FRD-308 thermal resistance WZP-014 magnetic pickup coil CS-01 Lightning arrester HPXIN SPD385-40A-MH hydraulic sight level gauge UHZ-AB precision pressure sensor 4NN-K5-M4-CIA Magnetic Fow Meter DE43F/WT4300E DN700 Keypad Board SY-PANEL1-WHEEL (V1.2) thermal resistance sensor DZ3.1.2.7-1992 Eddy Current Sensor PR6424/101-131 PHASE ANGLE DETECTOR LPD-11PA-P Eddy Current Sensor PR6424/101-030 Current sampler WBV334aS1-0.5 magnetic pickup sensor generator H1512-001 Transformer Coil Temperature Device EM5 BWR-04 BRAUN MONITOR MODULE E1610 speed sensor CS-1H-D-080-05-02 Controller RPCF-16 Proximity Switch GAK-PR18-5DC speed sensor NE510801-100-200-25-01-02 Eddy Current Sensor PR6422/103-121 proximity probe sensor CWY-DO-11 Embedded intermediate relay GZY-219/110V Eddy Current Sensor PR6422/102-001 Smoke fan speed sensor SZ-6 dc pressure switch WLGCA2 NEMA A600 TYPE3.4ANI Indication AD16-22D/R32S/AC380V ZYR-DFYL-2025-2-14
Description:One piece 3-lead ECG Cable with leadwires,Grabber,AHA Compatibility:This one-piece ECG cable is for use with the following ECG monitors: Abbott Medical: EX-50, Lifecare 5100, Lifecare 5200; Air Shields: HRRM-71-1/2, Porta-Fib I, II, III, System5, System6; ALT: 800, 800Plus, CX ATL Ultrasound, CX200, CX400, Apogee, HDI 9/200, Interspec Cardiology XL, Mark IV, Mark Vii, Ultramark 4/5/7/9; BCI Biochem International: 3101, 3404, 6100, 6200, 9100, 9200, Advisor, Autocorr; Carewell CPM-8000; Colin: BP308, BP408, CBM3000; Criticare: 504US, 504USP, 506, 507, 507E, 507ELC2, 507S, 508, 602-4B, 602-4USP, 1100, 2200, Poet 2, Scholar; Edan: M8, M8A, M8B, M9, M9A; GE Medical: Corometrics 556, Critikon 8100T, Dinamap 8700/9700; IVY Biomedical:101 (before 1989), 402, 700; LSI: LS5, 261; MDE: Escort 100, 101, 102, 200, 300, Prism, 360SL, 450SL, 521A, PortaPak 80, PortaPak 90/1000; Mindray: MEC 200, MEC 1000, MEC 1200; Physio Control (Medtronic): Lifepak 5, Lifepak 6, Lifepak 6S, Lifepak 7, Lifepak 8, Lifepak 9, Lifepak 10, Physio 1440/R, VSM-1ESF, VSM-2, VSM-2ESF, VSM-3; Nellcor: N-200, N-250, C-LOCK, N-1000, NPB-3900, NPB-4000; Nihon Kohden: BSM-8301A, 8302A, 8500A, 8502A, OEC-6102A (s/n>20156), 7102A, 8108A, OEC-6105A (s/n>20226), TEC 5531E, TEC-7100A, TEC-5200A (s/n>20421), TEC-7200A, 7300A; Novametrix: 902, 903, 910, Life Defense 1; Pace Tech: Minipack 300, Minipack 3000/3100, MiniMax 4000CL, Vitalmax 800 Plus, 2100, 2200, 4000, 4100, Vitalmax 4000CL, 4000, Modular/4100CL; Palco; Philips: M3921A A1, M3923A A1, M3925A A1, M3927A A3, M3929A A3; Pioneer (American Optical): 26125, 33167, 5260, 5330, Pulsar 4; PPG (Datamedix, Becton-Dickinson): Guardian 1001, N1001; Siemens: Sirecust 300DU, Sirecust 610, Sirecust 630, Sirecust DU, Cypress Ultrasound; Spacelabs Burdick: Medic 3, Medic 4, Medic 5, Medic 6, Series 500, Series 600, Series 900 90300/90400/90600/90700 Series, TEK-208/408/511/512/514/521, PCMS; Tektronix (Vitatek): 4045 Defib/208/400/500 Series; Welch Allyn: Propaq 100, Propaq 200 Series, Atlas Propaq Encore, Propaq CS, Ultra Smart, PIC 30, PIC 40, PIC 50; Zoll: M Series, E Series R Series, PD1200, PD1400, PD1600, PD1700, D900, PD2000, OEM: 8000-0025, 9500-0229 OEM Criticare: 852, 853, 1073/S (3 Leads Snap) 1073/P (3 Leads Clip) 854, 1075/S (5 Leads Snap) 1075/P (5 Leads Clip) Zoll: 8000-0025-02
Dongguan Xing Yi an Electrical Equipment Co., Ltd. specializes in sales of imported spare parts: ABB Advant module of DCS system OCS, ABB MOD 30/MODCELL, ABB MOD 300, ABB Bailey 90 INFI, ABB Procontic, ABB Procontrol, H&B Contronic, Moore APACS, Moore Panel Controllers, Rosemount RS-3, Siemens Is kamatic SIMADYN SIMATIC C1 �S5SIMATIC Teleperm CENTUM Xlmicroxl oxboroi /mvme mvme147 , MVME162, MVME167, MVME177 and other large imports of industrial modules and parts supply!!!! SIEMENS SITOP power in the "Hobbit" - small, delicate, bright, excellent price 2015 SIEMENS SITOP power team constantly have good news for you, to bring Chinese industrial circles, we not only have the excellent king -PSU8600 power was born, but also to tell you is that we introduced a more down to earth PM207. Everyone in the traditional sense of cognition, in PS207, 300PLC, or PS307, yes, we are all members of the SITOP family of power, PM207 is the introduction of a series of SIMATIC power to add a thick. Exquisite workmanship, inferior and the function of PS207, S7200 Smart, perfect PLC, think we are not suddenly a bright eyes, very interested, then I'll take the elf Highlight list, you will sit up and take notice of it. SIMATIC PM207 brief introduction The combination of SIEMENS SIMATIC and SIMATIC PM207 power automation products perfect. PM207 power high performance, S7-200 SMART PLC, SMART LINE and other equipment to provide safe and reliable power supply DC AC and DC input solutions. The product has a wide range of excellent electromagnetic compatibility characteristics (such as low ripple coefficient etc.), uniform design and flexible installation (installation standard DIN rail installation or wall), stability can enhance the user equipment, effectively improve the user's market competitiveness. Product basic characteristics Perfect matching S7-200 Smart system: contour size matching, rail or wall mounted Adaptive AC DC power grid: range 85-264VAC, 88-370VDC Perfect short circuit and overload protection function Extra overvoltage protection circuit that matches the PLC operating voltage limit Adjustable output voltage: 22.8-26.4VDC Excellent electromagnetic compatibility, overvoltage suppression, ultra low ripple (
basic parameters rated power(kw) 30 survivel wind speed(m/s) 45 max power(kw) 32 wind wheel diameterm(m) 11.86 rated voltage(v) 384/560 blade length(m) 5.63 rated revolution(r/m) 150 swept area(m2) 99.53 cut-in speed(m/s) 1 blade material FRP cut-off wind speed(m/s) 25 generator life 25 sone key technology control method adjust speed method pneumatic pitch brake method mechanical generator generator configuration 3-phase 380/220v 50/60hz generator type 3-phase permanent magnet AC protect class IP54 blade technology resin is imported from american ashland,acuum slip casting, no bubble ,high strongth controller SIEMENS PLC pass ISO9001 and Europe CE
We are pleased to introduce our company JATSON POWER PVT. LTD., based in Vapi, Gujarat, in the field of turnkey project electrification. We have a fully equipped manufacturing facility for L.V. and M.V. SWITCHBOARDS at Vapi and an experienced team of engineers and technicians to carry out INDUSTRIAL PROJECT ELECTRIFICATION in and around Gujarat. We are licensed partners of M/s. Siemens India Ltd. for manufacturing, assembling and selling SIEPAN 8PU type-tested low voltage switchboards (License certificate attached). We also are authorized channel partners of RR KABEL, a leading name in cable industry. We are registered as an approved vendor of M/s. GETCO Ltd. for erection of 66kV switchyard along with associated equipment & laying, testing and commissioning of power cables up to 66kV. We also have a branch office at Ankleshwar, Gujarat with a proficient team.
crw2si as optional 4.Electrical control system: germany siemens 5.Hydraulic control system: germany rexroth-valve or usa omega valve 6.Control system: stun e21 nc control 7.Shearing thickness range:0.1mm-40mm 8.Shearing width range:1 m-16 m 9.Shearing plate material available: mild steel, stainless steel, aluminum steel . Features 1.Holistic welding structure 2.Back gauge fulfill forward and backward movement under the control of motor 3.E21 system is used to indicate the value of back gauge 4.All major electrical and hydraulic elements are assembled with high grade international brands. 5.Pneumatic back support is optional 6.Linear guide way and ball screw optional 7.Can be produced according to your special needs We have all types of shearing machine, tell us the material, thickness, width of the metal plate, we will recommend you the suitable Model number: qc11y-6x3200 voltage: 380/415/220 v optional rated power: 7.5kw dimension(l*w*h): 3800x1550x2000mm weight: 6800kgs certification: ce iso warranty: 1 year after-sales service provided: engineers available to service machinery overseas hydraulic system: omega/bosch rexroth electronic system: siemens/synder, shear machine
Description: automatic rain gutter pipe forming machine Dimension: 7000(L) * 1700(W) * 1600mm(H) Machine weight: Approx. 4.8 T Frame material: 300 H steel Thickness of steel plate: 16mm Forming axis: diameter of 75 mm, 45 # quenched and tempered 45 # forged molding chakra: material, hard chromium plating Drive: by wheel and chain The computer automatic control, PLC of Siemens Line speed: 650 m/h Production rate: 2.2 T/h (for 0.4-0.5mm sheet) Coil weight: Max. 8 T Sheet thickness: 0.3- 0.8 mm Gear reducer: 5.5 KW planetary cycloidal reducer Pump station: 4 KW Power supply: 380V, 50Hz, 3 phase This roll forming line mainly consists of main frame, pump station, electric control panel and exit roller way etc. Packingï¼? Main machine is nude, the computer control box is packed with wooden frame. Main machine is nude in the container, the computer control box is packed with wooden packaging.
Guarantee & Returns 1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems. 2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it� or offer other solutions for you to make a choice. 3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items� must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation! GE IC697BEM711G GE 713IC697BEM713F GE IC697CMM711A GE IC200ALG322E GE IC200CHS001K GE IC200GBI001EF GE IC200MDL240D GE IC200MDL330F GE IC200CHS001K GE IC200MDL940E GE IC200PWR101C GE IC200PWR102E GE IC610MDL175A Ge IC693ALG220C GE IC693ALG221F GE IC693ALG221G GE IC693ALG221J GE IC693ALG222C GE IC693ALG391E GE IC693CHS391J GE IC693CHS392D GE IC693CHS392F GE IC693CHS392G GE IC693CMM311F GE IC693CMM311L GE IC693MDL240E GE IC693MDL240G GE IC693MDL632D GE IC693MDL734D GE IC693MDL740C GE IC693MDL740F GE IC693MDL742D GE IC697MDL340 GE CR104PBT11R1S2 GLI T53A4A1N GO Regulator H2-1Z55C3D111 Honeywell 51304650-100 Honeywell 51303985 300 Honeywell 51304489-100 Honeywell STT350-1-EP00-TCTC-0 Honeywell YSTR94G-11 ST300 S900 Hydac 1.11.13D06EC0/C/-V NEW Indelac SR7BF05-5-2S 1.5" Pentium II 80522PX266512 Ives Valves 150DCDC2B11A1-138 Kalpana 10982-00 Kay FGOGST0010NOOS Liebert MP115A Magnetrol 705-510A-310/7EA-N630-136 Malema M-50-0#-S-DT-X Marley A86794 Maxon CI SL CI-1BA0-00000-00-00 Metso A413285 02 21662457 Metso A413294 05 21574983 METTLER TOLEDO E12665900A Motorola NTN7394B Motorola TRN5686APR Motorola TLN2591A Motorola TRN8661A Motorola TRN9968A Motorola TRN9968A Motorola TRN5885A Motorola TRN866B Motorola AA16742 Honeywell YSTR94G-11 Norhtern Telecom NT8D09AK Nortel Telecom NT8D02AB Nortel Telecom NT8D02EA Nortel Telecom NT8D02EA Nortel Telecom NT8D02EB Northern Telecom NT8D09AK Northern Telecom NT8D09AL Northstar HSD380240812500 NSF A151-85S N-Tron 405TX Numatics NAG321402N000P Octel A 044 2540 001 Card Omron C200H-BC051-V2 Omron C200H-IA121 Omron C200H-OC224 Pall HC9600FKN16H Peabody 230/115/1ph/50/60HZ ProSwitch QS5108 PSG LIM AH11 RCM 1 1/2-81-L-60GPM-EK Ronan X87 300 GP RSO R12 Sartorius PR 5610/22 X5 Siemens 6ES7-195-7HA00-0XA0 Siemens 6ES7-195-7HB00-0XA0 Siemens 6ES7-332-1EH01-0AA0 Signal C2M-4 IC2 Square D A 4319-S1 Square D GJL36007M02 STI 43946-1020 STI MC47-20-975-R StoneL QX2HB02SDA-SPX13 SVF CF8M 1000 Swagelok SS-M3NBFL-G TCS TCS/1200 H7 R UNICAP A1 50-16162-01 Unicom FEP-93104T-T Wallace & Tiernan 32E093SSXX2X
Key factors 1.Suitable for 6 mtrs to 8 mtrs web width biaxially oriented film such as BOPET and it's function film, etc. 2.Machine speed can be MAX 600 m/min 800 m/min 1200 m/min. 3.Hydraulic rewinding or bottom linear can be optional. 4.Individual direct driven carbon fiber roll or belt driven, depends on disign. 5.All SIEMENS servo control system. 6.Intelligent Process Technology.
COD HDPE cable communication protect pipe production line Advantage 1. Easy operation; 2. stable running , 3. high output , and very popular in home country and abroad. Product Parameters Model SJ-75(PE) L/D 30:1 Pipe Diameter(mm) 50-200 Output(kg/h) 150-200 Production speed (m/min) 1.5 Main Parameters Model SJ-65/33(PE) SJ-90/30(PE) L/D 33:1 30/1 Pipe Diameter(mm) 16-32 32-63 Output(kg/h) 150 200 Production speed (m/min) 12-15 8-15 Power (kw) 37 50 The machinery electric parts details ITEM 1 Motors 2 PLC (customized) SIEMENS 200 series 3 Interface module(customized) SIEMENS 4 Touch screen(customized) SIEMENS 5 Low voltage electrical SIEMENS&SCHNEIDER 6 Inverter ABB 7 Temperature control system OMRON
1. Door curtain: High strength polyster textile fiber 2. Curtain thickness: 0.8 - 1.2 mm 3. Opening speed: 0.8 - 1.5 M/S 4. Closing speed: 0.6 - 1.0 M/S 5. Side Rail options: 2.0mm thick cold-roll steel sheet (Bao Steel) / 2.0mm thick stainless steel 6. Tube shaft: 114mm diameter / 2.5mm thickness round tube 7. Cover box options: 1.0mm thick cold-roll steel shett (Bao Steel ) / 1.0mm thick stainless steel 8. Motor brand: SEW / SIEMENS 9. Motor power: 550W / 750W / 1500W / 2200W / 4000W 10. Control box: SIEMENS / MITSUBISHI 11. Safety performance: Airbag / Photo cell 12. Optional control mode: Geomagnetic right, Radar, Stretcing wire switch, Linkage interlock, Pull rope, etc
