Dezhou Sanjia Machine Manufacturing Co., Ltd.

CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Tsq 2180 CNC deep hole boring machine Range of drilling hole dia : 40- 100mm Range of boring hole dia : 40- 800mm Sleelve boring hole dia : 140- 400mm Max boring depth : 3-12m one sepcification every each one meter Center height from horizental rail to spindle center : 1000mm Headstock spindle hole dia : 100mm Front spindle taper hole : 120mm, 1:20 Spindle rotation speed , steps : 16-270r/min 12steps Main motor : 45kw Feeding speed : 5-500mm/min ac servo stepless Carriage rapid moving speed : 2m/min Clamping dia of workpiece : 120-800mm Drilling bar box spindle hole dia : 75mm Front spindle taper hole of drilling bar box : 85mm, 1:20. Drilling bar box motor : 30kw Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps Feeding motor : 7.5kw ac servo stepless Pulling plate fast motor : 5.5kw Cooling pump motor : 5.5kwx4 4groups Hydraulic pump motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Volume of cooling system : 100, 200, 300, 600, 900l/min. Wooden packing.

Machine Series Features • Drill depth of 1-20M • Rack and pinion drive • Precision ground hardened guideways • Cast iron bed • Geared headstocks for high torque applications • Modern, efficient design. Machine Configurations • Rotating workpiece, stationary tool • Rotating tool, counter-rotation workpiece • Rotating tool, stationary workpiece. Process • BTA/STS solid drilling • BTA/STS counter boring • Trepanning • Skiving and roller burnishing. Machine Accessories • Precision pressure heads • Vibration dampener carriages • Workholding chucks • Workpiece roller steady • Hinged belt chip conveyor • Coolant chiller or heat exchanger. Tooling Accessories • Drill tubes • Drill tube clamps • Drill bushing systems • Tube seal packing glands • Vibration dampener cartridges. Advanced Options • Fanuc or Siemens CNC • Lantern chuck for pull bore tooling • X-axis actuator for bottle boring. Customer Service • Factory training for machine & tooling • Foundation design & process planning • Installation and startup • Technical support via phone and internet machine connection. Techincal information of ts2180 cnc deep hole boring machine Drilling dia range : ö60-ö130mm Boring dia range : ö80-ö800mm Boring depth range : 1-16m depending on client requirement Trepanning hole dia : ö140- ö400mm Spindle center height : 1000mm Headstock spindle dia : ö100mm Front spindle taper hole : ö120mm, 1:20 Spindle speed range , steps : 1--200r/min three shift Mian motor : 55kw dc motor Feeding speed range : 5--500mm/min stepless speed adusting Dia range of workpiece : ö270--ö1000mm Spindle hole of drilling pole box : ö120mm Front taper hole of drilling pole box spindle : ö140mm, 1:20. Drilling bar box motor : 45kw Drilling pole box speed range and steps : 16--270r/min 12 steps Feeding motor : 7.5kw Cooling motor : 11kwx4 Hydraulic motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Cooling system rate : 200, 400, 600, 800l/min Machine bearing : 25t--35t. Wooden packing.

On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Technical information of TS2110 deep hole boring machine boring Dia range: 20-100mm Drilling Dia range :20-40mm Max boring depth : 0.6,1m,1.5m,2m,2.5m,3m Headstock spindle hole Dia:100mm spindle rotation speed ,steps: 2-90r/min feeding speed 10-300mm/min AC servo stepless carriage rapid moving speed:2m/min clamping Dia of workpiece: 30-200mm rated pressure of cooling system:2.5Mpa volume of cooling system: 100,200,300l/min main motor: N=11kW feeding motor:3kw AC servo coolant pump motor:5.5KW x5(3groups) rated pressure of hydraulic system : 6.3MPa. Wooden packing.

Deep hole drilling machine 5/7 arms. -

BTA Deep Hole Drilling Tools