Duct-Baling-Press TypeBP 4000 V / 19,5 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier. Technical Data: Drive:..................................19,5 kW/400 V/50 Hz Pressure:...............................400 kN/m¦ Volume/stroke:.....................1,0 m¦ Cycle time:............................28 sec Feed opening:......................1350x820 mm Bale dimensions:..................800 x 900 x 600 ..............................................1.200 mm No of tightening wires:..........4 Press length:.........................5750 mm Press width:..........................2050 mm Press height with funnel:......1925 mm press height complete:.........2360 mm Weight:..................................6100 kg
FAKT BP 5000 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier. Technical Data: Drive:...................................35 kW/400 V/50 Hz Pressure:..............................600 kN/m¦ Volume/stroke:....................1,3 m¦ Cycle time:...........................19 sec Feed opening:......................1350 x 1160 mm Bale dimensions:.................1100x750x600 .............................................1.200 mm No of tightening wires:..........4 Press length:.........................6850 mm Press width:..........................2650 mm Press height with funnel:.....2150 mm press height complete:........3700 mm Weight:..................................14600 kg Basic equipment - Touchpanel - photocell control - bale longimetry - fully automatic three-sided duct cross sectional adjustment device - free pitching device - fully automatic binding - 4 pieces wire coil stands large - 4 pieces wire bags for 40 kgs spools - electric control ready to plug in (SPS Siemens) engineering und documentation space assignment plan plans of electric control operation manual security instructions
SBP 200 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................200 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:.....................1200x700 mm Bale dimensions:................1200x700x500 ..........................................up to 800 mm weight of bale:.....................50 up to 200 kg press length:.......................1990 mm press width:........................1360 mm press depth:........................1170 mm weight.................................1300 kg electric control ready to plug in
SBP 100 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................100 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:......................600x600 mm Bale dimensions:.................500x700x500.- 900 mm weight of bale:.....................50 up to 80 kg press length:.......................1120 mm press width:.........................830 mm press height:.......................2000 mm weight.................................980 kg electric control ready to plug in
Conveyor Idlers Tough Belt Training Idlers Toughing Idlers Carrying Idlers Self Allign Carrying Idlers Self Allign Return Idlers Impact Idlers Tough Belt Rubber Cushion Idlers Return Idlers Return Impact Idlers Conveyor Drum Pulleys Rubber Lagged Pulleys Head Pulleys Snub Pulleys Wing Pulleys
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
Our roller coatings provide a stable grip, are long-lasting, and resistant to damage from high temperatures, abrasion, oil, and chemicals. The majority of coverings are available with a self-adhesive backing that is high-heat resistant, guaranteeing a high level of adhesion to the roller. In addition, we provide non-adhesive roller covering tape with a selection of very fine specialty contact adhesives. Depending on the purpose, a variety of materials are used to create our roller covers.
We are leading Material Handling Solutions Providers Engaged in manufacturing and supply of Industrial Rubber Conveyor Belts, PVC conveyor belts and Magnetic Separator Belts. Renowned for product superiority and innovation. We offer World Class guaranteed ISO 9001:2008 certified products with Fastest Delivery period at lowest prices. Our products are suitable and meeting the requirement for various industries regularly like Steel plants, sponge iron -Power plants, Stone Crushers, Solvent plants, Pulp and Paper industries, Mines, Fertilizers and Chemical plants, Sugar Industry, Coal Plant, Coal Handling Plants, Smelters and other industries.
We are offering conveyor lines from 1 meter up to 200m long lines. We can make by client needs. We need from client: Dimension of manufacturing, product, and productivity
It is possible to transport food in two directions without changing the location of the conveyor.
