FluonETFE Series Fluon ETFE is a tough fluoropolymer that has chemical resistance and electrical properties comparable to typical fluoropolymers, such as PTFE, PFA and FEP but performs better than ECTFE or PVdF because of its improved mechanical strength and moldability. Fluon ETFE Usage: Wire and cable Tubing Linings and coatings Other Fluon ETFE Grade List: Pellet Grade Melt Flow Rate* Features Molding Methods and Applications C-55AP 5 - 7 General product Extrusion molding C-88AP 10 - 13 General product Extrusion molding C-55AXP 5 - 7 Resistant to stress cracking Extrusion molding, tube molding C-88AXP 10 - 13 Resistant to stress cracking Injection molding, electric wire coatings C-88AXMP 30 - 48 High fluidity Thin electric wires, thin-walled injection
NEOFLON PFA AP-Series NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom. It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins. Grades and Features of AP-Series Grades MFR (g/10 min.) Features AP-201 20 - 30 Superior in melt flowability. Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44). AP-202 65 - 80 Excellent melt flowability. Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52). AP-210 10 - 17 Good melt flowability. Suitable for injection molding. AP-230 1.5 - 2.5 Superior in stress crack resistance. Suitable for extrusion and transfer molding. AP-201SH 20 - 30 High purity grade. Superior in melt flowability. Suitable for complex shape articles. AP-211SH 10 - 17 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for joints and parts for pumps. AP-215SH 10 - 17 High purity grade. Suitable for injection molding. Suitable for joints and parts for pumps. AP-231SH 1.5 - 2.5 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for extrusion and transfer molding. AP-210AS 11 - 14 Anti-static grade. Suitable for injection molding. AP-230AS 1.5 - 3.0 Anti-static grade. Suitable for extrusion molding. AP-230ASL 1.0 - 2.5 Anti-static grade. Suitable for extrusion molding.
DuPont Chemours Teflon PFA 345/ 345 X Resins DuPont Teflon PFA 345 is a medium melt flow rate fluoroplastic resin available in pellet form. Compared with Teflon PFA 340, it offers increased flex life and greater resistance to environmental stress-cracking (Teflon PFA 345 offers a typical MIT folding endurance of 50,000* compared to 15,000 in Teflon PFA 340). Table 1 shows the typical property data for Teflon PFA 345. Typical Application Applications for DuPont Teflon PFA 345 include extruded tubing, wire and cable insulation, injection molded parts, and chemically resistant linings for bellows, valves, fittings, pipes, pumps, and other fluid-handling components. DuPont Chemours Teflon PFA other grade: Teflon PFA 340/ 340 X Teflon PFA 345/ 345 X Teflon PFA 350/ 350 X Teflon PFA 416HP Teflon PFA 440HPA Teflon PFA 440HPB Teflon PFA 445HP Teflon PFA 450HP Teflon PFA 451HP Teflon PFA 940HP Plus Teflon PFA 945HP Plus Teflon PFA 950HP Plus Teflon PFA 951HP Plus Teflon PFA 9724 Teflon PFA 9725 Teflon PFA 9738 Teflon PFAD 335D
NEOFLON FEP NP-Series NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene. FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA. Grades and Features of NP-Series Grades MFR (g/10 min.) Features NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films. NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket. NP-101 21 - 27 Improved melt flowability. Best suited for high-speed wire coating such as LAN cable. NP-120 4 - 10 Stress crack resistance is improved from NP-20. Wide range of applications, from thin-walled to thick-walled wire coating. We can give discount according to order quantity.
NEOFLON FEP NP-Series NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene. FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA. Grades and Features of NP-Series Grades MFR (g/10 min.) Features NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films. NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket. NP-101 21 - 27 Improved melt flowability. Best suited for high-speed wire coating such as LAN cable. NP-120 4 - 10 Stress crack resistance is improved from NP-20. Wide range of applications, from thin-walled to thick-walled wire coating. We can give discount according to order quantity.
Transparent polyetherimide (Tg 247 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230 degC (SABIC Innovative Plastics method). ULTEM PEI A Resin that Takes the Heat PEI SABIC ULTEM 1000 / 1000E / 1000F / 1000P / 1000R / 1000RV / 1010 / 1010F / 1010M / 1010P / 1010R / 1100 / 1100F / 1285 PEI+10% Glass fiber filled, SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled, SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled, SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled, SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452 The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. We can give discount according to order quantity.
ULTEM PEI A Resin that Takes the Heat PEI SABIC ULTEM 1000 / 1000E / 1000F / 1000P / 1000R / 1000RV / 1010 / 1010F / 1010M / 1010P / 1010R / 1100 / 1100F / 1285 PEI+10% Glass fiber filled, SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled, SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled, SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled, SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452 The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. We can give discount according to order quantity.
Zytel 70G20HSL BK039B is a 20% glass fibrereinforced, heat stabilised, lubricated polyamide 66 for injection molding. Zytel 70G25HSL BK039B is a 25% Glass Reinforced, Heat Stabilized, Polyamide 66. Zytel 70G25HSL NC010 is a heat-stabilized, 25% glass fiber reinforced polyamide 66 grade withlubricants and release agent. Exhibits high mechanical strength, excellent balance of stiffness & toughness, good high temperature performance, good electrical as well as flammability properties.
DuPont Elvamid nylon multipolymer resins are a family of unique polymers havingoutstanding abrasion resistance, high tensile strength and elongation, and excellentadhesion to nylon yarns.
Technical index 1.Solvent-free acrylic powder (not contain any solvent) 2. Type: Non-Cross-linked Copolymer 3. VOC (Residual monomer) < 1000ppm 4. Particle Size (Average) : 20 ï½? 100 �¼m 5. Water content < 2% 6. Bulk density : 0.2 ï½? 0.6 g/cm3 Applications Additives for Cosmetics Improve skin feeling, flow characteristics, matte finish and optical blurring of wrinkles. May be used for lotion, cream and other essence such as in skin care products, sun care products, and make-up products. Recommended loading is around 1% ~ 5% depending on particular formulations. Additives for Painting oil and ink Matting agent, finish appearance enhancement agent and light diffusion agent. Also improve scratch resistance, and provide better feeling. Additives for Film and Coating May function as anti-blocking agent when applied in polyolefin, PET and other films. Particles do not scratch and damage the films surface due to spherical shapes, and do not hinder light transmissions through films due to its highly transparent nature. Additives for Others aspects May be used as evaporative pore-forming agent or evaporative binder for ceramic moldings; May be used as release improver for binder, fluid visualizing agent or adsorbent. The material for base of denture Additive and materials for 3D printing
TROGAMID T and BX consist of terephthalic acid and 2,2,4- /2,4,4-trimethyl hexamethylene diamine, a chemical composition that is responsible for their amorphous structure. This makes TROGAMID T transparent in contrast to the semi-crystalline high-performance plastics of High Performance Polymers. The amorphous structure also results in low molding shrinkage and low tendency to warp. In addition to the basic products, a range of specially equipped compounds is also available. The product line fits a wide range of applications and satisfies many requirement profiles.
TROGAMID T and BX consist of terephthalic acid and 2,2,4- /2,4,4-trimethyl hexamethylene diamine, a chemical composition that is responsible for their amorphous structure. This makes TROGAMID T transparent in contrast to the semi-crystalline high-performance plastics of High Performance Polymers. The amorphous structure also results in low molding shrinkage and low tendency to warp. In addition to the basic products, a range of specially equipped compounds is also available. The product line fits a wide range of applications and satisfies many requirement profiles.
Teflon fep 100 fluoropolymers Teflonfep 100 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of astm d 2116 type i. It offers the excellent combination of properties characteristic of teflonfluoroplastic resins: non-aging characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance. Typical applications: Wire and cable insulation, small tubing, and injection molded parts. Packaging: Teflonfep 100 is packaged in 25-kg, single layer, plastic bags. For convenient shipment, orders of 1, 000-kg pallets are recommended. Other chemours teflon fep grade: Teflonfep 100 Teflonfep 106 Teflonfep 9302 Teflonfep cj95 Teflonfep cj99 Teflonfep 9494 Teflonfep 9475 Teflonfep 9819fl Teflonfep 9835 Teflonfep 9898 Teflonfep film properties bulletin Teflonfepd 121 We can give discount according to order quantity.
Ryton pps style; Ryton br111 /br111bl Ryton br42b Ryton r-4 Ryton r-4-200bl/na Ryton r-4-220bl/na Ryton r-4-232bl/na Ryton r-4-240bl/na Ryton r-4-270bl/na Ryton r-4xt Ryton r-7-120bl/na Ryton r-7-121bl/na Ryton r-7-220bl Ryton xe5030bl Ryton xe5515bl Ryton xk2340 We can give discount according to order quantity.
Ryton pps style; Ryton br111 /br111bl Ryton br42b Ryton r-4 Ryton r-4-200bl/na Ryton r-4-220bl/na Ryton r-4-232bl/na Ryton r-4-240bl/na Ryton r-4-270bl/na Ryton r-4xt Ryton r-7-120bl/na Ryton r-7-121bl/na Ryton r-7-220bl Ryton xe5030bl Ryton xe5515bl Ryton xk2340 We can give discount according to order quantity.
Veradel pes/pesu Chemical resistance and heat deflection Pes/pesu solvay veradel a-201 nt Pes/pesu solvay veradel a-301 nt Pes/pesu solvay veradel a-300 nt Pes/pesu solvay radel a-100 nt Pes/pesu solvay radel a-300 nt Pes/pesu solvay veradel ag-320 nt Pes/pesu solvay veradel ag-330 nt Pes/pesu solvay veradel 3200 Pes/pesu solvay veradel 3250 Pes/pesu solvay veradel 3400 Pes/pesu solvay veradel 3500 Pes/pesu solvay veradel 3600 Pes/pesu solvay veradel 3320gf Pes/pesu solvay veradel 3330gf Pes/pesu solvay veradel 3430gf
FORTRON PPS Celanese Ticona Fortron (Polyphenylene Sulfide/PPS) Brand:Ticona Fortron Packing:25kg/bag Origin:USA Type as below: Ticona Fortron 1140L4 Ticona Fortron 1140L6 Ticona Fortron 6165A6 Ticona Fortron 4332L6 Ticona Fortron 0203P6 Ticona Fortron 1342L4 Ticona Fortron 4184L4 Ticona Fortron 6165A4 Ticona Fortron 0214C1 Ticona Fortron 1200L1 Ticona Fortron 6165D8 We can give discount according to order quantity.
Hostaform,/Celcon, POM Celanese Ticona Celcon/Hostafrom (Polyoxymethylene /POM) Brand:Ticona Celcon/Hostafrom Packing:25kg/bag Origin:USA Type as below: Ticona Celcon M90 Ticona Celcon M270 Ticona Celcon M15HP Ticona Celcon GC25A Ticona Celcon UV90Z Ticona Celcon M25 Ticona Celcon GB25 Ticona Celcon TX90 Ticona Celcon C 27021 Ticona Celcon LW90-F2 Ticona Celcon M140-L1 Ticona Celcon C 9021 AW Ticona Celcon C 13021 Ticona Celcon CF802 Ticona Celcon B1 Ticona Celcon M90SW Ticona Celcon CFX-0288 Ticona Celcon FB02025 Ticona Celcon LW90-S2 Ticona Celcon KP30 Ticona Celcon GB10 Ticona Celcon AM90S Ticona Celcon S9364 Ticona Celcon GC15 Ticona Celcon EC140XF Ticona Celcon MC90 Ticona Celcon M90AW Ticona Celcon LWGC-S2 Ticona Celcon LM90Z Ticona Celcon LX90Z Ticona Celcon M90UV We can give discount according to order quantity.
Vectra,/Zenite, LCP Celanese Ticona Vectra/Zenite (Liquid Crystal Polymers/LCP) Natural/Black Brand:Ticona Vectra/Zenite Packing:25kg/bag Origin:USA VECTRA, A115 VECTRA, A130 VECTRA, A230 VECTRA, A430 VECTRA, A435 VECTRA, A440 VECTRA, A515 VECTRA, A530 VECTRA, A625 VECTRA, A700 VECTRA, A725 VECTRA, A950 VECTRA, B230 VECTRA, C130 VECTRA, E115i VECTRA, E130G VECTRA, E130i VECTRA, E135i VECTRA, E150i VECTRA, E440i VECTRA, E463i VECTRA, E471i VECTRA, E473i VECTRA, E488i VECTRA, E531i VECTRA, E540i VECTRA, E631i VECTRA, E820iPd VECTRA, E830iPd VECTRA, E840i LDS VECTRA, E845i LDS VECTRA, FIT30 VECTRA, FIT70 VECTRA, FIT72 VECTRA, J540 VECTRA, MLX4243 VECTRA, MT1300 VECTRA, MT1305 VECTRA, MT1310 VECTRA, MT1335 VECTRA, MT1345 VECTRA, MT4310 VECTRA, MT4350 VECTRA, S135 VECTRA, S471 VECTRA, S475 VECTRA, S540 VECTRA, S625 VECTRA, T.rex541 VECTRA, V143XL We can give discount according to order quantity.
VICTREX PEEK ESD101 High performance thermoplastic material with tight electrostatic dissipative control and low outgassing. ESD performance not influenced by moulding conditions provided that recommended processing conditions are rigorously adhered to.Semi crystalline, granules for injection moulding, easy flow, colour black. Applications in the semi-conductor industry were ESD control is essential while maintaining other performance requirements.
