Polyimide film Thickness:0.025mm~ 0.075mm Width: 16mm~660mm Length: any with in 1000m 1 roll / Wooden case
Polyimide film Polyimide filmstructure and propertyour polyimide film is high-temperature formed by polymerizing and casting pyromellitic acid dianhydride and 4, 4oxydianiline with dimethylacetamide as an intermedium to form h-grade insulating film. Polyimide film is widely used for electrical and electronic appliances with properties of heat resistance , chemical resistance(almost no organic or inorganic solvents except for caustic alkali), dielectric, flame retardant, physical, mechanical and compounded with many materials performances.Its properties as below: Size: thichness0.025-0.125mm, width16-1040mm Specifications: 1) Physical and chemical performance: A. Thickness tolerance: 10%, B. Density: 1.40-1.44g/cm3, C. Tensile strength: lengthwise 145mpa, crosswise 130mpa D. Elongation (lengthwise/crosswise): (60%2) dielectric performance: A. Dielectric strength: 150kv/mm, B. Dielectric coefficient: 4, C. Tangent of dielectric loss angle: 0.004, D. Volume resistance: 1010 , surface resistance: 1013. 3) Heat resistance performance: A. Melt point : without, B. Heat shrinkage (at 200centigrade): 0.4%, C. Flammability: difficult to burn, self-quenching. D. Thermal resolution temperature: 470.4) chemical resistance:with strong corrosion resistant capability, our polyimide film can withstand the solution of any organic solvent. Except for caustic alkali, no any inorganic acid and alkali can make up corrosion on the film but a little boss in mechanical strength may be performed.Uses: extensively used in the field of space flight, aeronautics, navigation and nuclear industry, also used in traction motor of locomotive, diving oil motor and various h-grade high temperature-resistant motor for mine, capacitor, as well as wrap insulation for high temperature cable, electromagnetic line, and can make composite film, flexible copper-metallized plate, flexible printing board etc. Rolls in carton with plastic foam as liner
Polyimide fep film (kypifep) is polyimide film coated with fep(f46) resin on one side(fh) or double sides(fhf) through the sintering process at high temperature, which combines the excellent properties of polyimide film and fep(f46) resin, high& low temp resistant, radiation resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as -112f(-80c) and as high as +500f(+260c), widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire. It can be melt and formed soon as desired at defined temperature. Carton
Thermal Conductive Insulation Adhesive Back Copper Foil Tape Material: Copper foil, Copper foil, Nano carbon, Thermal materials Use: Carton Sealing Adhesive Side: Single Sided Adhesive: Acrylic Adhesive Type: Hot Melt Feature: Heat-Resistant Design Printing: No Printing Place of Origin: Guangdong, China (Mainland) Brand Name: Laimeisi Model Number: LMS Product name: Thermal Conductive Insulation Adhesive Back Copper Foil Tape Color: Gold Size: Customized Size Certification: SGS, ISO,Reach, Rohs Surface: Polished Length: 100m Thickness: 55-75um Shape: Customised Thermal conductivity: 560W/mk Packaging & Delivery Packaging Details: Following the customer request Delivery Detail: Shipped in 3 days after payment 1. Grade: SGS, REACH, ROHS 2. Size: customized 3. Standard: LMS-TB Product Nameï¼?Thermal Conductive Insulation Adhesive Back Copper Foil Tape Materialï¼?Copper foil, Nanocarbon, Thermal materials Colorï¼?Black Sizeï¼?Customized size Gradeï¼?SGS, ROHS, Reach Usedï¼?Thermal conductive, high temperature, Led, PC, Heat sink...etc Thicknessï¼?55um, 75um Thermal Conductivityï¼?560w/mk Glueï¼? 3M Feature of Thermal Conductive Insulation Adhesive Back Copper Foil Tape 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC. 2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.Good electrical insulation properties 4.Keep constant even at high temperatures. 5.Resistance to chemicals; moderate resistance to general chemical products. Application of Thermal Conductive Insulation Adhesive Back Copper Foil Tape Cooling fin and the heat diffusion film, electronic equipment cooling, Other application need to heat or Conductive, eg: LED light, CPU, GPU, IC, PC...etc.
Polyimide film/kapton, fep film The polyimide casting films of our company are produced by polymerizing and casting pyromellitic dianhydride and 4.4 diaminodiphenyl ether to form h-grade insulating films. They have following good properties: 1) Good properties of insulation and tensile strength; 2) Good temperature c resistance and used in wide temperature range, between -60¦+250¦ for a long period and between c269¦+400¦ for a short period without changing in tensile strength or insulating property. 3)Good chemical stability and resistance to corrosion. 4)Excellent flame retardant property 5) good radio-resistance. After the film being irradiated with r ray of 109 remain its properties unchanged. 6)Can be complexed with many materials, when complexed with fluorine resin moisture protection and corroision resistance are greatly improved. Standard export carton
The name of the product: polyimide film line. Low product introduction: this product is on the high quality copper (aluminum) conductor, well-spaced winding and polyimide film and polyimide fluorine compound film, 4.6 after heating composite fluorine 4.6 melt in the history of film, thin film between the conductor and bonded into a whole. The product has excellent voltage resistance and insulation thickness is thinner, heat resistance up to 220 â??, is mainly used in motor, reactor, electric welding machine or other similar electric product winding. The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for producing polyimide film. Standard: GB/ t7673-2008 and enterprise standards. Production scope: Aluminum flat wire Narrow side size a:1.00mm - 8.00mm. Wide side size b:3.00mm - 25.00mm. Copper flat wire Narrow side dimension a:0.80mm -- 5.60mm. Wide side size b:2.00mm - 16.00mm. Copper aluminum round wire Diameter: 1. 1. Please contact us if you choose the above range. Low material: Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m The polyimide film line should be free of cracking to the bare conductor when the diameter of the round rod is bent and the narrow side is bent.
Polyimide adhesive tape is made of polyimide film with acrylic resin adhesive. Application:The heat resistance grade of this product is E grade, which is a transparent film with good transparency, flexibility, high mechanical strength and dielectric properties, uniform thickness, and shiny surface. It is used for low-voltage motors, electrical coils, inter-turns, end wrapping insulation, gasket insulation, magnet wire wrapping insulation, E and B class electrical duct insulation and capacitor dielectric, cable wrapping, transformers and composite materials manufacturing, and can also be used in packaging, FRP, clothing lining collar and other occasions. Nominal thickness:
Voltage: 12-480V Insulation Resistance: 1000V Withstand AC: 1200V 5MA/min Thickness: 0.13-0.4mm Maximum size: 480mm 1000mm Warranty: 3 Years Material: PI/Kapton With Etching Film Solder Joint Insulation Treatment: dispense, silicone rubber Static power Deviation: 5% (According To Customer Requirements) Certification: ISO9001, CE, Rohs, UL Installation Method: Adhesive Paste, Installation Through Mechanical Installation Holes Temperature Control Method: Adjustable Thermostat, Temperature Fuse, Temperature Control Switch
Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide�?? monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.�?? Polyimide film�?? is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties�?? over a wide temperature range between -269�??�?�ºC�?? (-452F) and 400C�?? (752F) making them superio�?? for electrical insulation applications.�?? Polyimide film can be laminated, metalized,�?? punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It�?? is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of�?? temperatures. we�?? can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing
Company Introduction: Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black. we have strict quality inspection system ,we trust we can supply you best quality product with high quality Description Polyimide (PI) is a polymer of imide� monomers, also know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.� Polyimide film� is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing. Polyimide film provides excellent electrical, thermal, physical and chemical properties� over a wide temperature range between -269�ºC� (-452F) and 400C� (752F) making them superio� for electrical insulation applications.� Polyimide film can be laminated, metalized,� punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It� is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of� temperatures. we� can provide both standard and custom polyimide film solutions for a customer depending on their needs. Slitting and Packging Width:520mm~1040mm Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic Packaging:PE film packaged,with aluminum foil and foam,Suspended packing. Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight. Applications Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc. Backing material for Polyimide coating or composites Flexible Printed Circuits Board(F-PCB) Polyimide Label Polyimide tubing
Product Description: Polyimide film aluminum wire is a multi-layer polyimide and fluoropolymer dispersion-coated film. The fluoropolymer coating functions as a heat-fusible layer for bonding to magnet wire conductors. It has superior scrape abrasion resistance and exhibits lower frictional properties than wire insulated with other commonly used polyimide materials. Polyimide film
Sell pi film Polyimide film(kapton) Pi-h, equivalent of kapton hn, in thickness of 25, 50, 75, 100, 125, 150, 175mm and with width 10mm to1040mm. Pi-hb, equivalent of kapton vn, in thickness of 25, 50mm and with width 10mm to 1020mm. Pi-f, equivalent of kapton fn616, 919, 929, 019, 029etc, can be both sides or one side coated with fep.
Polyimide silicone/acrylic adhesive tape is made of polyimide film single or double coated with heat-resistant silicone or acrylic adhesive, with excellent properties of heat resistance, electrical insulation, solvent resistance and radiation protection, friendly to human-beings and environment. Ei650/640 offers better elongation at rupture, and is used for electrical insulation of electrical equipment and high temperature insulation, such as, motors, li batteries etc. Ei650rl/640rl has release liner of paper or pet film material with release agents of paraffin, silicone or fluoride-ion, used for die-cut of all kinds of high temperature press sensitive small film parts.
6251 Polyimide tape is a general polyimide film that is coated or laminated on one or both sides with FEP Fluoropolymer, which imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. 6251 Polyimide tape is recommended in applications that require a heat bondable film, or moisture and chemical resistance beyond the capabilities of uncoated polyimide film. Applications Tubing Heater circuits Heat sealable bags Automotive diaphragms and manifolds Electrical insulation Typical Properities NO. Item Index 1 Tensile Stength (MPa) 156 135 2 Elongation at Break 76 93 3 Striping Force Tape to Tape (N/25mm) 4 Tape to copper 4 4 Surface Resistivity 1.5 1015 5 Breakdown Strength (MV/m) 90 6 Volume Resistivity (m) 2.1 1014 7 Dielectric Constant 50Hz 2-3 8 Dissipation Factor 0.0012 Polyimide film FEP Series is polyimide film coated with FEP on one or both side, imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. Mainly used in magnet wire insulation, formed coil insulation, CPTC and release liner. Type Polyimide film FEP Constructions In this series order code of three digits, the first and third digit represents the normal thickness of the coating FEP, the symbol 9 is used to represent 12.7um (0.5 mil) 6 to 2.54 um. HF is used to represent polyimide film coated with FEP on single side, and FHF to double side. Type FEP PI Film FEP Total um um um um HF019 25.4 12.7 38.1 HF019-B 30 10 40 HF019-C 40 10 50 HF011 25.4 25.4 50.8 HF021 50.8 25.4 76.2 FHF616 2.54 25.4 2.54 30.48 FHF616-B 3 25.4 3 31.4 FHF616-C 6.35 25.4 6.35 38.1 FHF919 12.7 25.4 12.7 50.8 FHF919-B 10 30 10 50 FHF919-C 10 40 10 60 FHF929 12.7 50.8 12.7 76.2 Thickness Tolerance % 10 Other size should be talked if we could produce.
Polyimide Film Adhesive Tape works on any environmental and made with general purpose film with silicone adhesive. This film is excellent for electrical insulation properties, high temperature resistant, and solvent resistant. It is great for Electric task, 3D printer platform, BGA heating, soldering task. It is color in Amber, and prevent overheat electrical component. 2,Technical data Color:Amber Thickness:40-80(um) Adhesive:Silicone adhesive Backing thickness:Polyimide 25/38/75(um) Popular size :50mic/60micx12mm/18mm/19mm/24mm/36mmx33m Standard roll length:33m Adhesion to steel:26N/In Elongation at Break:40% Temperature :260°C Dielectric strength:4000 Static charge(v):
High Temperature Golden Kapton Polyimide Film PI Tape Descriptions: High Temperature Golden Kapton Polyimide PI Tape also known as Kapton tape or Polymide Tape, is made of polyimide film with heat resistant silicone adhesive to withstand temperature up to 260ºC (500â??), packaged in a 36 yard (33m) roll. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: Gold finger mask of printed circuit boards during wave soldering High temperature mask for high temperature powder coating Electrical insulation for traction motor, transformer, cable, and capacitor Bar code labels on PCB Semiconductor manufacturing
Introduction of polyimide film line Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line. Executive standardGB/T7673-2008 and company standard Production range flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.00mm25.00mm copper strap wire Narrow edge size a:0.80mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter1.78.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280©mm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241©mm2/m at 20.
Anti-static ESD Polyimide Film PI Tape,also call ESD Polyimide Tape,also known as ESD Kapton tape, consists of low static polyimide film coated with silicone adhesive to withstand temperature up to 260â?? (500, packaged in a 36 yard (33m) roll. This tape generates extremely low levels of triboelectric charge when it is unwound from the roll and also when removed from most surfaces on which it is placed. This makes the tape an excellent choice for use near electronic components and assemblies. Features: Excellent electrostatic dissipation High temperature resistance up to 260â?? (500 No adhesive residue after removal Good adhesion Flame resistance UL V-0 Chemical and radiation resistance Applications: Anti-static PI Tape is the optimal product for electrostatic dissipation. This tape can be used for wave soldering, masking of printed circuit boards during conformal coating, gold leads and other components on boards filled with sensitive integrated circuits.
Introduction of polyimide film line Product name: polyimide film line use copper (aluminum) conductor lapped by polyimide film or polyimide fluoride 4.6 composite film, then heated in order to bond thin film and conductor. This product has good voltage resistance and thin insulation thickness, heat resistance can reach 220 , it is mainly used in motor, reactor, electric welder and other similar products. Electrician naked copper (aluminum) conductor with extrusion process is ideal material for polyimide film line. Executive standardGB/T7673-2008 and company standard Production range flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.00mm25.00mm copper strap wire Narrow edge size a:0.80mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter1.78.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20.
High Temperautre Insulation Polyimide PI Film Descriptions: High Temperautre Insulation Polyimide PI Film is a general-purpose film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It has excellent balance of electrical, mechanical, physical, thermal, and chemical properties over a wide range of temperatures from -269â?? to 400â?? (-452â?? to 752â??). It also has good dimensional stability, radiation resistance, and flame resistance. It does not melt or burn as it has the highest UL-94 flammability rating: V-0. Features: High dielectric strength Good dimensional stability Chemical resistance Radiation resistance Flame resistance UL V-0 UL approved qualified film Temp resistance from -269â?? to 400â?? (-452â?? to 752â??) Applications: PI Film can be metallized, punched, formed, laminated, or adhesive coated. It can be used in a variety of electrical and electronic insulation applications: wire and cable tapes,motor slot liners, magnet wire insulation, formed coil insulation, transformer and capacitor insulation Polyimide Adhesive tape or polyimide laminates. . Coverlay or Stiffener in F-PCB Polyimide Label Polyimide tubing.
