Polyimide Film

Polyimide film Polyimide filmstructure and propertyour polyimide film is high-temperature formed by polymerizing and casting pyromellitic acid dianhydride and 4, 4oxydianiline with dimethylacetamide as an intermedium to form h-grade insulating film. Polyimide film is widely used for electrical and electronic appliances with properties of heat resistance , chemical resistance(almost no organic or inorganic solvents except for caustic alkali), dielectric, flame retardant, physical, mechanical and compounded with many materials performances.Its properties as below: Size: thichness0.025-0.125mm, width16-1040mm Specifications: 1) Physical and chemical performance: A. Thickness tolerance: 10%, B. Density: 1.40-1.44g/cm3, C. Tensile strength: lengthwise 145mpa, crosswise 130mpa D. Elongation (lengthwise/crosswise): (60%2) dielectric performance: A. Dielectric strength: 150kv/mm, B. Dielectric coefficient: 4, C. Tangent of dielectric loss angle: 0.004, D. Volume resistance: 1010 , surface resistance: 1013. 3) Heat resistance performance: A. Melt point : without, B. Heat shrinkage (at 200centigrade): 0.4%, C. Flammability: difficult to burn, self-quenching. D. Thermal resolution temperature: 470.4) chemical resistance:with strong corrosion resistant capability, our polyimide film can withstand the solution of any organic solvent. Except for caustic alkali, no any inorganic acid and alkali can make up corrosion on the film but a little boss in mechanical strength may be performed.Uses: extensively used in the field of space flight, aeronautics, navigation and nuclear industry, also used in traction motor of locomotive, diving oil motor and various h-grade high temperature-resistant motor for mine, capacitor, as well as wrap insulation for high temperature cable, electromagnetic line, and can make composite film, flexible copper-metallized plate, flexible printing board etc. Rolls in carton with plastic foam as liner

Polyimide film/kapton, fep film The polyimide casting films of our company are produced by polymerizing and casting pyromellitic dianhydride and 4.4 diaminodiphenyl ether to form h-grade insulating films. They have following good properties: 1) Good properties of insulation and tensile strength; 2) Good temperature c resistance and used in wide temperature range, between -60¦+250¦ for a long period and between c269¦+400¦ for a short period without changing in tensile strength or insulating property. 3)Good chemical stability and resistance to corrosion. 4)Excellent flame retardant property 5) good radio-resistance. After the film being irradiated with r ray of 109 remain its properties unchanged. 6)Can be complexed with many materials, when complexed with fluorine resin moisture protection and corroision resistance are greatly improved. Standard export carton

Sell pi film Polyimide film(kapton) Pi-h, equivalent of kapton hn, in thickness of 25, 50, 75, 100, 125, 150, 175mm and with width 10mm to1040mm. Pi-hb, equivalent of kapton vn, in thickness of 25, 50mm and with width 10mm to 1020mm. Pi-f, equivalent of kapton fn616, 919, 929, 019, 029etc, can be both sides or one side coated with fep.

Supplier: Polyimide film, polyimide adhesive tape, polypropylene film

Supplier: Polyimide film and polyimide tape
Buyer: N, n-dimethylacetamide

Supplier: Polyimide film, insulation material

Polyester film Recommended nominal thickness is as follows: 25¬ªmf=50¬ªmf=75¬ªmf=100¬ªmf=125¬ªmf=150¬ªmf=188¬ªmf=200¬ªmf=250¬ªmf=300¬ªmf=350¬ªmf· Special requirements for thickness can be settled upon negotiation. -_100¬ªm tolerance f+5% 100¬ªm--300¬ªm tolerance f+4% 300¬ªm--350¬ªm tolerance f+6% 1.3 the deviation of diameter and width. Nominal width: 500mm & 1000mm Special requirements for width can be settled upon negotiation. The film can be supplied in tape. Rolls in carton with plastic foam as liner

Polypropylene film Specifications of polypropylene film AppearanceThe surface of the film is smooth and free of defects such as wrinkles,avulsions, grains, bubbles, dents and contaminations.The roll of film is winded tightly and free of the telescopicphenomena Dimensiona.Thickness and toleranceNominal thickness: 10.5 IM,12»m,14»m,15»m,16»m,17»m,18»m,19.5»m

Supplier: Kapton tape, polyimide tape, kapton film, polyimide film, teflon film, teflon tape, ptfe film, ptfe tape, glass cloth tape, acetate cloth tape, copper foil, adhesive tape, aluminium foil, adhesive tape, emi shielding tape, thermal conductive tape, release film, emi shielding house, metal cover, anti stainless strip, bimetal, nickelled copper, sin plated copper, nickel plated copper, copper sheet, copper pad, ed copper foil, connector, terminal, fpc, productive film
Services: Adhesive coating, metal punching, metal process, material manufacturing