Standard cavity magnetic flap liquidometer also called magnetic column, magnetic frame, magnetic float level meter, can be in high temperature and high pressure, high viscosity and strong corrosion conditions, safe and reliable to measure the liquid level, degree, display striking, wide measuring range. This series of products are widely used in electric power, petroleum, chemical industry, metallurgy, environmental protection, medicine, food and other industries in the process of liquid level measurement and control.Magnetic level gauge is divided into top mounted magnetic float level gauge and side mounted magnetic float level gauge (also called float level gauge and magnetic flap level gauge) According to the installation position is different, the container to provide side, top, top side show type, etc. According to different working medium, the provide 304/316 l stainless steel, stainless steel lined with ptfe, ABS, PP - R, UPVC material, such as ABS, PP - R, UPVC, stainless steel lining ptfe material suitable for acid, alkali and other corrosive medium. In addition to the basic, and high temperature and high pressure, corrosion, clamp cover model, frost prevention type, electric heating type, electronic double color type, and other forms to choose from.
Short Description: CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements. The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments. Advantagesï¼? â?²Automatic adaptation, automatic calibration, long-term stable output true height value. â?²Anti-hanging material, anti-condensation, anti-bubble and other anti-pollution ability. â?²The structure is simple without any movable parts, high reliability and low maintenance. â?²A variety of signal outputs are available for easy access to different systems. â?²It is not affected by factors such as temperature, specific gravity and pressure of the liquid to be tested. â?²High temperature resistance â?¤150°C, high pressure resistance â?¤2.5MPa, long life. â?²Good sealing performance, protection class IP68 (except CR6052). â?²Perfect overcurrent, overvoltage, and power polarity protection measures. Performance indexï¼? Measurement rangeï¼?0.01~10m Precision: 0.5ã??1 Ambient temperature: -20~60 Storage temperatureï¼?-40ï½?+85 Probe temperature resistance: -40~150 Wet contact material: 304 stainless steel/PTFE Supply voltage: 12ï½?28VDC Power consumptionï¼?â?¤30mW Pressure range: -0.1~2.5MPa Long-term stability:â?¤0.2%FS/year Output signal: 4ï½?20mA/0-5V/RS485/CAN communication Fixed way: thread mounting M27Ã?2ï¼?M33Ã?2ï¼?G2 thread Temperature driftï¼?â?¤0.02%FS/ï¼?0ï½?70ï¼? Explosion-proof parameter: intrinsic safety Exiaâ?¡C T6 Ga IP gradeï¼?IP67/IP68 Intrinsic safety parameter:Ui:28VDC,Ii:93mA,Pi:0.65W,Ci:0.02uf, Li:0.1mH
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other difficult to measure situation.The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance.It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements. The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor.The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium.In any case, you can adapt to different measurement requirements in complex locations without recalibration.And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability.The product's own protection rating is IP68, which enables long-term stable measurement in harsh environments. The product complies with GB3836.4-2010 and GB3638.1-2010
Rugged Construction Easy mounting with flanged connection Continuous level monitoring (with use of transmitter 4-20mA output) Direct visible level indication No process fluid in contact with the level indicator Suitable for Interface level application Safe for high temperature, high pressure applications Safe for corrosive, toxic, flammable liquids Available in different range of materials Assured level indication without power supply
Rugged Construction Easy mounting with flanged connection Continuous level monitoring (with use of transmitter 4-20mA output) Direct visible level indication No process fluid in contact with the level indicator Suitable for Interface level application Safe for high temperature, high pressure applications Safe for corrosive, toxic, flammable liquids Available in different range of materials Assured level indication without power supply
Short Description: The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
Short Description: The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting Lead wire wayï¼? a.Shielded cable connection, default length 2m (can be customized according to user requirements) b.Aviation plug connection c.Terminal block connection Explosion typeï¼? ExiaIIBT4ã??ExdIICT5(Depending on the model) IP gradeï¼?IP65 Installationï¼?thread mountingã??flange mountingã??Positioning ring installationã??Suspension installation or user-specific customization (depending on model)
Pale Yellow to light brown powder, food grade The product will be fresh. This product will not be grown from Genetically Modified Seeds. Prior to packaging the product will be inspected and passed through magnets and metal detectors to remove ferrous metallic contamination. The product will be treated to control microbial level. Packing: 25 kgs
Brownish Powder, food grade obtained and ground from the natural bark of Indian Cinnamon sticks and ground into a fine powder. The product will be fresh. This product will not be grown from Genetically Modified Seeds. Prior to packaging the product will be inspected and passed through magnets and metal detectors to remove ferrous metallic contamination. The product will be treated to control microbial level. Packing: Bulks and Retail Packs.
Fenugreek Powder obtained from the Seeds of Indian fenugreek. Seeds are plucked, washed and dried before they are made into powder. The product will be fresh. This product will not be grown from Genetically Modified Seeds. Prior to packaging the product will be inspected and passed through magnets and metal detectors to remove ferrous metallic contamination. The product will be treated to control microbial level. Packing: 25 kgs
Furniture hardware, cabinet door handle, main door handle, aluminum door handle, stainless steel door handle, drawer knob, lock body & cylinder, door stopper, mortise door handle, wall hanger, pvc louvers, baby latch, council handle, sofa leg, door magnet, bathroom accessories, towel rack, paper holder, robe hook, towel rod, napkin holder soap dish, tumbler holder, liquid dispenser, double soap dish, floor trap, glass shelf, quartz kitchen sink, double bowl rectangle, single bowl square single bowl rectangle, single bowl with drain board.
Liquid Cylinder Level Gauge Microcyl / INox - 250 Liters level Gauges Full SS body Make, 2/2.5" Dial
VRV Level Guage Or 300 Litres Lqiuid Cylinder level Gauge. with Full body SS make, including Calibration Road with SS make.
REFLEX GLASS LIQUID LEVEL INDICATOR Enquiry Now Liquid level indicators are equipped with boron silicate glass, hardened by an accurately controlled heat treatment process. These level indicators are used to display the level of ammonia gas in the system. The liquid level indicators are installed with stop valves equipped with handwheels The liquid chamber is a one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid whereas the light striking the glass in the vapour portion is reflected, making the liquid appear black. Sizes: 12", 18", 24", 30" 36", 42" 48", 54", 60". Gives safe and positive visual indication of liquid level in vessel under high pressure and temperature conditions. Suitable for R717 (Ammonia), HCFC & HFC. In case of glass break, the balls inside the valve stop the refrigeration flow immediately. Tempered boron silicate glass resistant to chemical, thermal and mechanical shocks. Safe working pressure: 400 psig (27 bar). Large chambers for boiling, flashing and surging liquids.
Double cavity magnetic flap liquid level gauge side mounted magnetic float level gauge magnetic float level gauge plant Product name: double cavity magnetic flap liquid level gauge Product code: 155757-647 Views: 575 Processing custom origin: in kaifeng Magnetic flap models: double cavity liquid level gauge Type: the level Measuring range: 0.3 ~ 6 meters (standard), up to 15 meters Level of accuracy: plus or minus 10 mm Temperature range: 0 ~ 400 Pressure range: 0 ~ 16 mpa The process connec tion: flange/spool/thread Double cavity magnetic liquid level gau ge is suitable for high temperature and high pressure liquid container turning, the position of the measurement and control. Clearly indicates that the height of liquid level, direct display striking, indicator and completely isolated storage tank, the use of safe, reasonable design, simple structure, convenient installation and reliable, stable performance, long service life, low maintenance cost, easy installation and maintenance, etc.Double cavity magnetic flap liquid level gauge is divided into top mounted magnetic float level gauge and side mounted magnetic float level gauge (also called float level gauge and magnetic flap level gauge) Users can according to the requirements of the project, cooperate with remote transmitter use, can be realized on the digital display, as well as the standard of 4 ~ 20 ma output far eastone electrical signals, to match the recording instrument, or the needs of the industrial process control. Can also be used with magnetic control switch or close to switch, etc, the liquid level monitoring alarm and control into the liquid. Product features: 1, precision manufacturing, strong and durable 2, special structure and material design 3, high definition liquid level indicator 4, flexible installation and the process connection 5, can form a complete set of switch and transmitter 6, good stability, full, zero long-term stability can amount to 0.1% FS/year. Within the scope of the compensation temperature 0 ~ 70 ??, the temperature drift less than 0.1% FS, throughout the allowed working temperature range is less than 0.3% FS. 7, with protection, current limiting protection circuit, the will not damage the transmitter is negative when installation, exception to send automatically within 35 ma current limit. 8, solid structure, no moving parts, high reliability, long service life. 9, easy installation, simple structure, economy is durable.
Product name: Molasses Beet HS Coe: 17039000 Origin: Egypt Packing: if in container it will be by flexitank OR if in Vessel it will be at tanks. Beet molasses is the syrupy by-product of the production process to extract sugar from sugar beets. The residual liquid that is left over is an excellent source of energy for livestock. It also offers a valuable feed resource to the cattle industry and a sugary substrate for the yeast and fermentation industry. Molasses is sold in bulk, delivered in heated tanker trucks (approximately 28 tons) USES Beet Molasses is an excellent source of energy and a good source of protein and essential minerals for both dairy and beef cattle. In growing and finishing diets, it can be added to dry rations or blended with other ingredients to produce a balanced liquid feed. For beef cattle, it can also be top-dressed to improve palatability of poor hay or silage. Molasses is also popular as an additive in salt licks and mineral supplements, assisting as both a sweetener and a binding ingredient. Molasses is a key ingredient in the production of yeast. Molasses is added to other substrates, heated and processed to create dry and liquid yeast for sale at both the wholesale and retail levels. Finally, in recent years, molasses has gained popularity as an alternative or a supplement to chloride salt for de-icing roads. Not only does it cost less than rock salt, it is also less corrosive and more environmentally friendly. STORAGE AND HANDLING Beet Molasses must be stored in a well-insulated, heated tank; at temperatures above 110 degrees it can easily be pumped with a 2.5 to 3 HP pump and 3 inch tubing. FOR MORE INFO AND ORDERS CONTACT US FOR NEXT TENDER (24/7)
Product Description Scientific name : Salvia Hispanica Ingredient : Chia Oil Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional Characteristics : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants. Sensory Characteristics Color :Light yellow Smell :Caracteristic Taste :Caracteristic Texture :Oily liquid Physicochemical Characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
Chia Seed Oil A great alternative to fish oil! 100% Vegan Plant source of omega 3-6-9 Supports healthy heart and brain functions No more fishy smell or taste Chia seed is the world's richest plant source of omega-3 fatty acids, much higher than other natural sources like flax seed oil or fish oil which often causes unpleasant aftertaste or fishy burps. Chia seed is also rich in antioxidants, high in protein and contains 8 essential amino acids. Other than rich in omega-3 fatty acids, chia seed also provides omega-6 linoleic acids (LA) and omega-9 oleic acids. These three types of unsaturated fats play a critical role in multiple bodily functions. A balanced proportions of omega fatty acids are required by the body for optimal health. Chia seed oil packs more omega-3 into each dose than seeds alone Product Description Scientific name : Salvia Hispanica Ingredient : Chia Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants Sensory characteristics Color: Light yellow Smell: Caracteristic Taste : Caracteristic Texture : Oily liquid Physicochemical characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
fixed maximum liquid level gauge LS15-S3F560A Since 1989, YOYIK has been engaged in the manufacture and supply of industrial spare parts, accumulating rich industry experience and strong technical strength. The company not only produces various types of generator set accessories, but also provides customers with professional technical support and customized services. In particular, in the technical transformation and overhaul projects of thermal power plants, hydropower stations and metallurgical enterprises, YOYIK's solutions have been well received. With its unremitting pursuit of quality and a complete after-sales service network, YOYIK has become a trusted partner of many companies. Yoyik can offer many spare parts for power plants as below: #DF-fixed maximum liquid level gauge LS15-S3F560A-DF Speed secondary meter JM-C-1ZS-100 Indicator steam inlet HP heater WSS-581 Power Board M83 ME8.530.004-4 LVDT vavle IV C9231126 CCM Card PC D230 Bolt electric heating rod ZJ-16.5-6 Excitation card SWL-3 DB/X LSZDH HMX LEVEL SWITCH RF 8 FOR BAG HOUSES RF8-07G2A1A750 Eddy Current Sensor PR6422/105-110 Eddy Current Sensor PR6422/001-040 high pressure switch RC860MH090HYA linear motion position sensor DET700A active abs sensor CS-3-L100 Bolt electric heating rod ZJ-20-51 displacement lvdt HL-6-250-15 speed sensor CS-1H-D-100-05-01 Axial displacement sensor 3500/45 TSI LVDT Sensor TDZ-1-60 Bolt electric heating rod ZJ-20-52 Bolt electric heating rod ZJ-20-47 High energy cable EHE-20-C-1-6 IP56 For XE-100 Light DN-1000A Optical fiber Fuse RT36-2(NT2) LVDT transmitter XCBSQ-02/100-01-02 speed sensor QBJ-CS-1-A02-B-C24-D Eddy Current Signal Converter CON021/913-030 thermal interface resistance WZP2MA LVDT Sensor B151.36.09.G4-002 INTELLIGENT TACHOMETER HY-01 fluid level gauge 705-510A-110/7MR-A110-136 LVDT sensor ZD-5000TD LVDT Sensor B151.36.09.04-008 linear distance sensor 191.36.09.09 CPU MODULE CPU-01-JAPMC-CP2200 Magnetoresistive Rotation Speed Sensor D-090-02-01 Eddy Current Sensor PR6423/000-020 fixed maximum liquid level gauge LS15-S3F560A fixed maximum liquid level gauge LS15-S3F560A MY-DFYL-2024-7-17
