Short Description:
The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment.
The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit.
When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined
Product features
1)Contact measurement
2)High precision, high stability, high reliability
Long service life
4)Multiple signal output options
5)Reverse polarity protection
6)Lightning protection, anti-radio frequency interference
7)Compact structure and strong environmental adaptability
8)No need for periodic calibration and maintenance
9)Measure liquid level of tank with or without pressure
10)Isolated explosion-proof type (optional)
11)Easy installation
Technical parameter:
Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model)
Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm
Repeaditityï¼? Superior to ±0.002%FS
Output temperature driftï¼? 50ppm/
Product power consumptionï¼? â?¤50mA
Output rippleï¼? â?¤20mV
Load capacity�4�20mA output� Load capacity�500Ω �
0�5V�0�10V output�Controller load�5KΩ
Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti
Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
Short Description: The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting Lead wire wayï¼? a.Shielded cable connection, default length 2m (can be customized according to user requirements) b.Aviation plug connection c.Terminal block connection Explosion typeï¼? ExiaIIBT4ã??ExdIICT5(Depending on the model) IP gradeï¼?IP65 Installationï¼?thread mountingã??flange mountingã??Positioning ring installationã??Suspension installation or user-specific customization (depending on model)
Supplier: En590, jet fuel a1, pet coke, pump, valve, cosmetic, mechanical seal, cotton bag, glass bottle, hand sanitizer, hydraulics, cosmetic bottles,socks, paper drink straw, alcohol wipe, other korean products, mask, or nitrile gloves and hand sanitizer and korean cosmetics
Supplier: Steam coal, copper ore, iron ore, zinc ore, manganese ore in india, africa and morocco. we can supply copper ore 500mt to 3000 mt monthly basis, iron ore 25000mt to 50000mt, zinc ore 5000mt to 50000mt monthly basis. we are specialized in engineering valves, all types of metal pipes, fittings, fasteners, tubes, sheets, buttweld pipes and fittings and forge products. our mining of stone like indian limestone, manganese ore. we are associated with leading manufacturers of icumsa 45, 100, 160 etc. in brazil we supply in bulk vessel quantities moq is 12500 mt.
Boat valve Inflatable Boat Air Valve Raft Dinghy Kayak Canoe air valve PVC Boat Air Nozzle Valve grey valves Features: * Inflatable boat safety air valve. Easy inflate and Deflate *Made of high-quality materials, durable *Comes in three parts: Vave base, Valve core and valve cap *suit for all inflatable boats, river rafts,canoe, rigid inflatable boat,banana boat, air mat,kayaksand so on.l *Double seal leak protection Specification: *Material: PVC *Color: Grey(as shown in the picture) *Size:As picture show (approximately) Package content: 2pcs *Inflatable Boat Air Valve
Supplier: Fuel like diesel en590, jet fuel a1, lngg, lpg, copper cathode, a7 ingots, used rails, agri products like sugar, wheat, rice, soyabean etc, sunflower oil, valves & fasteners, spare parts for machineries. construction equipments like concrete machines, crushers, sand washing plants, material handling equipments, and construction materials, coal, diesel, machineries, tyres, generators, tyre shredder machines, fasteners, valves, epoxy, chemicals
Services: Exporter
Valves
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH