This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
1. lighting products: * indoor luminaires (including led bulb, led tube, led panel, led slim panel, led batten, led ceiling, led cross and linear light, led high bay, led parking, led downlight, led track light); * outdoor luminaires (including led flood light, led solar flood light, led street light, led solar street light.) * led grow lights (a variety of professional grow lights for dragon fruit, chrysanthemum, medicinal plants, ginseng, tomatoes, strawberries, grapes, watermelons, cantaloupe, bell peppers, orchids, vegetables, algae, etc.); * fishing lights (including on boat lights and underwater lights); 2. kitchenware products: vacuum flask, water bottle, electric kettle; electric blender, rice cooker, glass liner and accessories..Manufacturing, export and import, transport, and odm/oem services for all of the products.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Gold Induction Melting Furnace This gold melting machine is designed for 2-10kg, which is suitable for melting precious metal such as gold, silver, copper, zinc, etc. With speedy melting time could be realized within 1-3 minutes. Based on the latest and most advanced IGBT induction technology, this small Gold Melting Kit can saves 15-30% energy than KGPS, 100% full load, with low power consumption. The power supply varies from 8kw-15kw for this series furnace. Power on open water faucet put ceramic crucible in the machineput metal in the cruciblepress heating switchpress stop switchtongs the crucible and pour the metal liquid. 4 kg gold melting furnace Attention: 1.Can't be water-break during using the machine. If happens by accident, it needs to pick up the crucible at once, or the heating coil will be damaged. 2. Don't press the heating switch without crucible. 3. Press stop switch first, then pouring the liquid after the metal melted. 4. If the work is finished everyday, please take away the crucible then shut off power. 5. When water flow indicator light is shut off, it stands for out of water or low water pressure. And now the machine will start the function of protection, the gold melting machine will stop heating.
Application of Medium Frequency Induction Copper Melting Furnace: 1.Non-ferrous and ferrous metals melting; 2.Precious metal melting, like gold, sliver, platinum; 3.Semiconductor material melting; 4.Metal alloy melting, like aluminum alloy, zinc alloy, copper alloy,etc. Main characteristics: 1.Light weight, small size. 2.Different shape and size of induction coil can be changed easily to heat different parts. 3.Mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure, etc. 4.Simple to operate, a few minutes is enough to learn it.
About Induction Melting Furnace Induction Melting Furnace is major steel producing technology using scrap & sponge iron (directly reduced iron) as main raw material. This technology contributes significant steelmaking capacity in secondary steel sector in India and abroad. It has Air Pollution Steel scrap comes from various sources and generally has contaminants/coating etc on it. When this scrap is heated contamination/coating etc. disintegrates from steel and comes out either as slag or becomes air borne, thus causing air pollution. The major source of Air Pollution is : 1. Dust & Dirt 2. Rust 3. Oil & Grease 4. Paint & Galvanized Iron 5. PVC Coated Steel Selection of Technology for Air Pollution Control Device The following technologies are usually adopted for Air Pollution Control System in Induction Furnace industry: a. Bag Filter Type System (Dry) b. Venturi Scrubber Type System (Wet) About Bag Filter Type System (Dry Process) Working of Equipment Bag Filter Type System 1. Suction Hood 2. Spark Arrestor: 3. Bag Filtration System : 4. ID Fan: 5. Stack (Chimney): Advantages: 1. Low Power Consumption 2. Dry System, No water pollution 3. No corrosion of metal except normal wear & tear 4. Suitable for dust pollution which are the major cause of pollution in induction furnace 5. Achieves desired characteristic of treated gases even for high dust load, as Efficiency of bag filters is very high 6. Low operation & maintenance cost Control Practices About Venturi Scrubber Type System (Wet Process) Working of Equipment Venturi Scrubber Type System 1. Suction Hood: 2. Ducts & Bends: 3. Venturi Scrubber: 4. ID Fan : 5. Stack (Chimney) : Advantages : 1 Low Floor Area 2 Can handle high temperature gases 3 Suitable for gas pollution such as SO , NO , etc. 2 x Disadvantages : 1 Higher Power Consumption to achieve desired standards 2 Generates Water Pollution 3 Material of Construction is prone to corrosion hence low life cycle 4 Choking of pipe, Nozzle and duct (near scrubber) due to Wet condition 5 Higher operation & maintenance cost 6 Can remove submicron particle only with very high pressure drop leading to still higher power consumption 7 Material of Construction is prone to corrosion hence low life cycle 8 Choking of pipe, Nozzle and duct (near scrubber) due to Wet condition 9 Higher operation & maintenance cost 10 Can remove submicron particle only with very high pressure drop leading to still higher power consumption.
2.Production Description: 1)Medium Frequency Induction Furnace for melting 2)Full digital control system with high accuracy 3) Melting steel, iron,stainless steel,copper,aluminium 4)0.15-20 tons capacity 5) Constant power output, speedy melting, good electricity saving efficiency. 3.Usage: Medium Frequency Induction Furnace Mainly used in melting steel, iron, copper, aluminum and alloy, is with high melting efficiency, good electricity saving effect, good metal component uniformity, less burning loss, speedy temperature rise, easy control of temperature, is suitable to all kinds of metal melting. 4.Characters and Advantages: 1) Constant power output, speedy melting, good electricity saving efficiency. 2) Zero-voltage sweep-frequency style start, adapts to requirement of frequently start. 3) Comprehensive protection functions, such as overcurrency protection, overvoltage protection, current-limiting protection, voltage-limiting, water-break protection, and default protection, equipment runs reliably under premise of melting speed guarantee. 4) Easy to operate, suitable for all casting process. 5. Package: Plywood cases and nude.
1.Production Name: Medium Frequency Induction Furnace 2.Production Description: 1)Medium Frequency Induction Furnace for melting 2)Full digital control system with high accuracy 3) Melting steel, iron,stainless steel,copper,aluminium 4)0.15-350 tons capacity 5) Constant power output, speedy melting, good electricity saving efficiency. 3.Usage: Medium Frequency Induction Furnace Mainly used in melting steel, iron, copper, aluminum and alloy, is with high melting efficiency, good electricity saving effect, good metal component uniformity, less burning loss, speedy temperature rise, easy control of temperature, is suitable to all kinds of metal melting. 4.Characters and Advantages: 1) Constant power output, speedy melting, good electricity saving efficiency. 2) Zero-voltage sweep-frequency style start, adapts to requirement of frequently start. 3) Comprehensive protection functions, such as overcurrency protection, overvoltage protection, current-limiting protection, voltage-limiting, water-break protection, and default protection, equipment runs reliably under premise of melting speed guarantee. 4) Easy to operate, suitable for all casting process. 5. Package: Plywood cases and nude. Plywood Box.
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) waste food solutions aluminum used beverage cans (ubc) / aluminum ingots.Logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Solvent distillation plant , ethanol distillation plant , etp, water treatment plant , effluent treatment plant, evaporator , dryer, zld plant, lab equipment supplier, lab chemical supplier, industrial equipment , storage tank , bulk tank, petrochemical plant, ethyl acetate distillation plant, supplier of chemicals, reactor , pressure vessel , instruments, plc panel ,dcs panel, mcc panel , steam boiler, agitator tank, mixing tank, blending tank, bottling plant , vodka plant , ena distillation plant , fermentation plant , cooking plant, cpu plant, dg set, dpr report. etc, industrial dryer, industrial storage tanks, lab equipment, bio cng plant, biogas plant, bioreactor, sludge settling tank, wash settling tanks, pre fermenters, culture vessel, blender, blending tank, agitator, mixing tank, shell and tube heat exchanger, reboiler, reactor, mcc electrical panel, pressure vessel, evaporator, industrial dryer, beer plant, brewery plant, ethanol distillery , grain alcohol distiller plant.
Arc furnace, induction furnace, melting furnace -
Our International Partners have developed a range of Induction melting furnaces with the state of the art Solid state power supplies for steel making and these are proven and stable furnaces available in Peninsular Malaysia today. Steel melting range is available from 3MT upward to 50MT with solid state power supply upto 18000KW . Greener Melting Operation: During melting operation , our power supplies provides maximum power throughout the melt cycle . No molten heel is required. No capacitor switching or transformer voltage tap is to be adjusted. High efficiency melting is ensured . Our power sources are available in 6 pulse, 12 pulse and 24 pulse rectifier configuration and is designed for 24 x 7 running. For minimizing Total Harmonic distortion we supply all large power supplies above 1500KW in either 12 pulse or 24 pulse system.
Vacuum Induction Melting Furnace Introduction: As the most experienced Vacuum Induction Melting Furnace manufacturer in China, ShinTek Vacuum Induction Melting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on… Vacuum Induction Melting Furnace Specifications: Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500 Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5 Load (KG) 10 25 50 100 200 500 1000 1500 Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW Voltage 300V 175V 375V 375V 375V 700V 700V 700V Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz Max. temperature 1600? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 6.7*10-3Pa Leakage rate =4Pa/h Remark: The Vacuum Induction Melting Furnace can be customized for your specific project, and also can be equipped with casting furnace for your melting and casting process. Vacuum Induction Melting Furnace features: (1) Vacuum Induction Melting Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Induction Melting Furnace – Suitable for most of metallurgy industries, can be customized for users; (3) Vacuum Induction Melting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system. (4) Vacuum Induction Melting Furnace – Two feeding method for choose: Manual or Semi-continueous; (5) Vacuum Induction Melting Furnace – Friendly control system.
Lead slag produced from rotary furnace lead percentage is 20 to 25%
Granulated Blast Furnace Slag
