Faraday rotators change the polarization state of light traveling through it. High Power Faraday Rotator Mirror Features Applications Low Insertion Loss Fiber Optic Instruments High Return Loss Fiber Sensors High-Reliability Fiber Lasers High Stability Coherent Detecting Research Specifications Parameters Value Center Wavelength 850nm Operating Wavelength Width ±5nm Max. Insertion Loss 1.5dB Faraday Rotation Angle for CWL 45deg Max. Rotation Angle Tolerance at 23 for CWL ±3deg Max. Polarization Dependent Loss at 23 , only for PI 0.15dB Min. Extinction Ratio at 23 , only for PM 20dB Max. Power Handling 0.5,1,...5,10W Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information FRM/PMFRM-1111-234-5-6 1111 -Center Wavelength: 0850=850nm 2 -Fiber Type: 003=PM980, 004=Hi1060 3 -Pigtail Type: 0=250μm bare fiber, 1=900μm loose tube 4 -Package Dimension: 0=58x28x26mm, S=Specified 5 -Fiber Length: 0.8=0.8m,1=1m 6 -Handling Power: 00=500mW, 01=1W, 02=2W, 05=5W, 10=10W Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Cladding Power Strippers (CPS) can be used for high power fiber lasers and fiber amplifiers to strip unwanted cladding light from dual clad fiber (DCF). Cladding Power Stripper Features Applications High Stripping Efficiency High Power Fiber Laser Low Signal Loss and Beam Quality Degradation Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration 1x1 Signal Wavelength 800~2000nm Pump Wavelength 800~2000nm Signal Fiber X/125 X/250 X/400 Cladding Power Attenuation >20dB >18dB >18dB Signal Insertion Loss 18dB(Input port ER >25dB) Return Loss >45dB Package Dimension D1, D2, D3, D4, D5, D6, D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information CPS-1-222-33-4-5-666-777 1 - Port Configuration: 1x1=1x1 222 -Fiber Type for Signal: SSS=Specified 33 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 4 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 5 -Fiber Length: 0=0.8m, 1=1.0m 666 -Handling Power for Signal: 0005=5W, 010=10W, 0100=100W, 0200=200Wï¼?5000=5000W 777 -Cladding Power:: 0005=5W, 010=10W, 0100=100W, 0200=200Wï¼?5000=5000W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x50mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HP 2.Pleased to contact us if you need more fiber selections Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
(N+1)x1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)x1, (18+1)x1, (36+1)x1 and other reasonable configurations are available. (6+1)x1 Pump & Signal Combiner (PM or Non-PM) Features Applications High Transfer Efficiency High Power Fiber Laser Air-Clad Technology for Robust Power Delivery Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration (6+1)x1 Pump Wavelength 800~1000nm Signal Wavelength 1030~1080nm or 1450~1600nm Signal Input Fiber X/125 X/125 or X/250 or 20/400 Pump Fiber 105/125 0.22NA 105/125 0.22NA or 200/220 0.22NA Signal Output Fiber Y/125 Y/250 Y/250 20/400 Pump Efficiency >90% >93% >95% Signal Insertion Loss 45dB Package Dimension D1, D2, D3, D4, D5, D6, D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information MPC-111-222-3-444-55-6-7-888-999 111 - Port Configuration: 061=(6+1)X1 222 -Fiber Type for Input: SSS=Specified 3 -Fiber Type for Pump: 1=MM-S105/125-22A, 2=MM-S200/220-22A, S=Specified 444 - Fiber Type for Output: SSS=Specified 55 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 6 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 7 -Fiber Length: 0=0.8m, 1=1.0m 888 -Handling Power/Signal 005=5W, 010=10W, 100=100W, 200=200W 999 -Handling Power/Per Pump: 005=5W, 010=10W, 100=100W, 200=200W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x5mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HP; 2.Pleased to contact us if you need more fiber selections; Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
7x1 pump combiner, 3x1 pump combiner, multimode pump combiner, power combiner, high power pump combiner. NÃ?1 Pump Combiner Features Applications High Transfer Efficiency High Power Fiber Laser Air-Clad Technology for Robust Power Delivery Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration 3x1 7x1 Pump Wavelength 800~1000nm Pump Input Fiber 105/125 0.22NA 105/125 0.22NA or 200/220 0.22NA output Fiber Y/125 or 200/220 200/220 or Y/250 or 20/400 Pump Efficiency >95% Total Handling Power 300W Package Dimension D1,D2,D3,D4,D5,D6,D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information PC-111-2-333-44-56-777 111 - Port Configuration: 03N=3X1, 07N=7X1 2 -Fiber Type for Pump: 1=MM-S105/125-22A, 2=MM-S200/220-22A, S=Specified 333 - Fiber Type for Output: SSS=Specified 44 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 5 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 6 -Fiber Type: 0=0.8m, 1=1.0m 777 -Handling Power/Per Pump: 005=5W, 010=10W, 100=100W, 200=200W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x5mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HP 2.Pleased to contact us if you need more fiber selections; Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Mode Field Adapters (MFA) can be used for high power fiber lasers and fiber amplifiers. These devices can be used to connect two fibers with different core diameters and numerical apertures (NA). Mode Field Adapter(PM or Non-PM) Features Applications High Transfer Efficiency High Power Fiber Laser High Power Fiber Amplifier Stable and Reliable Custom Configurations Available Specifications Parameters Value Port Configuration 1x1 Signal Wavelength 1030~1080nm or 1450~1600nm SMA Fiber 6/125 10/125 10/125 6/125 20/250 LMA Fiber 10/125 20/125 25/250 20/400 30/250 Signal IL for Forward Route 0.3dB 0.4dB 0.5dB 0.5dB 0.2dB Signal IL for Backward Route 0.3dB 0.5dB 0.7dB 0.7dB 0.2dB Total Handling Power 10W Polarization Extinction Ratio 18dB(PM Fiber Type) Return Loss 45dB Package Dimension D1, D2, D3, D4, D5, D6, D7 Operating Temperature -5~+70 Storage Temperature -40~+85 Ordering Information MFA-11-222-333-44-5-6-777 11 - Port Configuration: 1X1=1X1 222 -Fiber Type for Input: SSS=Specified 333 - Fiber Type for Output: SSS=Specified 44 - Package Dimension: D1,D2,D3,D4,D5,D6,D7, S= Specified 5 -Pigtail Type: 0=250um bare fiber, 1=900um loose tube 6 -Fiber Type: 0=0.8m, 1=1.0m 777 -Handling Power/Signal: 005=5W, 010=10W, 100=100W, 200=200W Notes: 1.Package dimensions: D1:Ï?4.0x60mm, D2:5x5x50mm, D3:70x12x8mm, D4:75x12x8mm, D5=80x14x10mm, D6=100x15x8mm, D7=100x28x12.6mm-HPï¼? 2.Pleased to contact us if you need more fiber selectionsï¼? Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Wall mount Dxl series optic fusion unit body, maximum make the optic fiber forming, connection and wiring to be high density while offer the best protection for the cable and can be independence fusion connection unit which install in 19 inch standard stander. Feature: Modularize design, frontal operation. Integrate fusion and wiring, maximum high density. Can install in 19 sinch standard stander. Suitable for ribbon and non-ribbon cable. Can install many kinds of adapter, such as fc, sc, st and lc, etc. The adapter and equipment use 30 degree card connecting installment, which ensure the jumping wire's curvature radius and can avoid the laser to burn eyes. Easy operation, complete protection. The optic fiber and pigtailed all have above 2m saving space. Function target: Environment temperature: -40~ 60 Atmospheric pressure: 70kpa~106kpa Rh: 50db; apc type: >60db The push-pull durability lifetime of optic connector is greater than 1000 times.
The square pressure polishing machine strength controlled by four angle, thus the pressure is more precise to control and the final products has higher precision. For pc terminations above 95% could pass 3d interferometer test, while for apc terminations this rate keep 90%. Each polishing jig for this machine is available as lc, sc, st, fc, mtrj, e2000 pc connector as well as angle polishing Made by high quality, hardened steel s136 imported from germany Using the good motors imported (ensuring the movement stable under ultra long time) Using the japanese nsk bearing ( ensuring the internal structure to be stable in the high-speed operation, extending the working life) The electron primary device is imported from omron (ensuring the electrical specification stable) Ferrule diameter: 2.5 mm (0.0984 inch)1.25mm(0.0492 inch). Ferrule material: Zirconia (zro2), quartz capillary, glass materials, colophony material stainless steel and titanium alloy Main parameter: Machine working voltage: ac220v(ac110v can be offered) Polishing chassis diameter:127mm Polishing chassis beating:¡¡§15um Machine net weight:23kg Machine size:250l*220w*300h Polishing time setting:0~99 hours 99 minutes 99 second Foam carton
Features: 1) High quality, high linearity DFB laser 2) Advanced pre-distortion function 3) 1U, 19 inch standard chassis, 220VAC, 50Hz switching power supply or others. 4) 750 or 862 MHz bandwidth, supporting most broadband transport applications. 5) Unique thermal design provides superior heat dissipation, increasing the reliability of your system. 6) Automatic gain control helps maintain constant RF drive level to laser for consistent performance. 7) An interface LCD display allows you to monitor the transmitters performance. In addition, RS232 helps you monitor your transmitter performance in a long-distance Specifications Item Unit Specification Bandwidth MHz 47-750 or 860 Optical Wavelength nm 1310 (í+ 20) Optical Output Power (í+ 0.25 dB) (4~20mW) all series Safety Power Shutdown Yes Input RF Power, Main (í+ 0.1 dB) dBµV 72.0(+3/-2) Isolation, Auxiliary to Main Input dBc -32 AGC Input Range dB í+ 3 Response Flatness (maximum) dB í+ 0.75 Response Slope dB 0 to 0.75 Input Impedance ª+ 75 Input Return Loss dB >14 RF Test Point (í+ 1.0 dB) dB -20 Carrier-to-Noise Ratio (CNR) dB >51.0 Composite Second Order (CSO) dBc í_60 Composite Triple Beat (CTB) dBc í_65 Powering V AC220í+10% Power Consumption (maximum) W 40 Mechanical Specifications Optical Connector FC/APC, or SC/APC RF Connector F-Type Dimensions (height í- width í- depth) cm 4.3í-48.5í-30.0 Environmental Specifications Ambient Temperature -25+65 Operating Temperature Range 0-50 Notes: Optical link budget that provides a C/N of 51 dB when loaded with 59 PAL-D channels over a 10km single fiber. Composite Triple Beat (CTB) is 65dBc typical (all models) Composite Second Order (CSO) is -60dBc typical (all models) Specifications are subject to change without notice. 6KG
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. 2W Optical Isolator (1064nm, Faraday Based) Features Applications Low Insertion Loss Fiber Amplifier High Return Loss Testing Instrument High Isolation MOPA Fiber Laser High Stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 35dB Min. Isolation at 23 28dB Max. Insertion Loss at 23 1.7dB Max. Insertion Loss at 23 and Input Power 300 mW 2.0dB Max. Insertion Loss at 23 and Input Power 1 W 2.5dB Max. Insertion Loss at 23 and Input Power 2 W 3.0dB Max. Polarization Dependent Loss at 23, only for PI 0.2dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 2W Max. Peak Power for ns Pulse 10kW Max. Tensile Load 5N Operating Temperature +10 to +50 Storage Temperature 0 to +60 With connectors, the handling power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber. PM FWDM Device Features Applications Low Insertion Loss CATV System High Return Loss CWDM/DWDM Module High Reliability & Stability EPon/Gpon Networks Specifications Parameters Values Type 0698 5598 5506 5548 Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB Max.Channel Flatness 0.4dB Min.Extinction Ratio at 23 18dB Max. Wavelength Thermal Stability 0.003nm/ Max. Insertion Loss Thermal Stability 0.005dB/ Min.Return Loss 50N Max.Power Handling (CW) 300mW Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's 1x2 Polarization Maintaining Fused Type WDM, 1064nm/980nm, 1550nm/980nm, 1550nm/1064nm. Fused Type PM Fiber WDM Features Applications High Extinction Ratio Testing Instruments High Isolation Coherent Communication Low Insertion Loss EDFA High stability & Reliability Fiber Sensor Specifications Parameter Value Type 980/1550 1064/1550 980/1064 Operating Bandwidth ±15nm Max. Insertion Loss Signal Port0.7dB 0.7dB 0.8dB Pump Port 0.7dB 0.7dB 0.8dB Min. Extinction Ratio 20dB 20dB 18dB Min, Isolation 18dB 18dB 13dB Min. Directivity 55dB Max. Return Loss 50dB Max. Optical Power(CW) 3W Fiber Type PM Panda Fiber Package Dimension Ï?3*54mm(bare fiber, 0.9mm loose tube) 90*20*10(0.9mm/2.0mm/3.0mm loose tube) Operating Temperature -5~+75 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from �5% to �0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses. Fused Type PM Fiber Standard Coupler Features Applications High Power Handling Coherent Communication Low Insertion Loss Power Monitor High Stability & Reliability Fiber Sensor Specifications Parameter Value Grade P A P A P A Center Wavelength 1310, 1550 980, 1030, 1040, 1064 780, 850nm Operating Bandwidth ±15nm Max. Excess Loss 0.7dB 0.8dB 0.4dB 0.6dB 0.6dB 0.8dB Min. Extinction Ratio 20dB 18dB 20dB 18dB 20dB 18dB Min. Directivity 50dB Max. Return Loss 55dB Max. Optical Power(CW) 3W Fiber Type PM Panda Fiber Package Dimension Ï?3*54mm(bare fiber,0.9mm loose tube), 90*20*10(0.9mm/2.0mm/3.0mm loose tube) Operating Temperature -5~+75 Storage Temperature -40~+85 Splitting Ratio Tolerance Grade P Grade A Splitting Ratio 50/50 % ±4.8 ±7.0 40/60 % ±3.9 ±5.5 30/70 % ±2.5 ±4.0 20/80 % ±2.3 ±3.1 10/90 % ±2.1 ±2.6 5/95 % ±1.4 ±1.5 1/99 % ±0.5 ±0.6 Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
This product can also be used to multiplex other wavelengths. including 980/1030 nm (pulsed laser applications) and 1064/1550 nm (Erbium-Ytterbium pumping). Low power (300 mW, 500 mW) and high power (20W) handling are available. They are ideal for polarization maintaining fiber amplifiers, fiber lasers, and high-speed communication system and instrumentation applications. Fused Type PM Fiber WDM Features Applications High Extinction Ratio Testing Instruments High Isolation Coherent Communication Low Insertion Loss EDFA High stability & Reliability Fiber Sensor Specifications Parameter Value Type 980/1550 Operating Bandwidth ±15nm Max. Insertion Loss Signal Port 0.5dB Max. Insertion Loss Pump Port 0.5dB Min. Extinction Ratio 20dB Min, Isolation 18dB Min. Directivity 55dB Max. Return Loss 50dB Max. Optical Power(CW) 1W Fiber Type PM Panda Fiber Package Dimension Ï?3*54mm(bare fiber, 0.9mm loose tube) Operating Temperature -5~+65 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introductionï¼? RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap Isolator is the device hybrid of coupler and isolator. PM Tap Isolator Features Applications Low Insertion Loss Compact Fiber Amplifiers High Return Loss Compact Fiber Optical System High Extinction Ratio Fiber Laser High Isolation Fiber Sensor Specifications Parameter Value Stage Single Dual Single Dual Operating Wavelength Range1550±15nm 1064±5nm Max. Excess Loss 1.0dB 1.2dB 2.2dB 3.5dB Signal Tap Ratio 1±0.2%, 5±1%, 50±2% Typ. Peak Isolation 40dB 52dB 40dB 52dB Min. Isolation at 23 28dB 45dB 28dB 45dB Min. Extinction Ratio at 23 20dB Min. Return Loss 50dB Max. Optical Power(CW) 500mW Max. Tensile Load 5N Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap Isolator is the device hybrid of coupler and isolator. PM Tap Isolator Features Applications Low Insertion Loss Compact Fiber Amplifiers High Return Loss Compact Fiber Optical System High Extinction Ratio Fiber Laser High Isolation Fiber Sensor Specifications Parameter Value Stage Single Dual Single Dual Operating Wavelength Range1550±15nm 1064±5nm Max. Excess Loss 1.0dB 1.2dB 2.2dB 3.5dB Signal Tap Ratio 1±0.2%, 5±1%, 50±2% Typ. Peak Isolation 40dB 52dB 40dB 52dB Min. Isolation at 23 28dB 45dB 28dB 45dB Min. Extinction Ratio at 23 20dB Min. Return Loss 50dB Max. Optical Power(CW) 500mW Max. Tensile Load 5N Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. 3-port High Power PM Isolator (1064nm, 1030nm) Features Application Low Insertion Loss Polarization Maintaining Fiber Amplifier High Return Loss Testing Instrument High Isolation Mopa Fiber Laser High stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064nm , 1030nm, 980nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 30dB Min. Isolation at 23 25dB Typ. Insertion Loss at 23 0.6dB Max. Insertion Loss at 23 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.2dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 100W Max. Peak Power for ns Pulse 20kW Max. Tensile Load 5N Package Dimension 82x38x35mm Operating Temperature +10~+50 Storage Temperature 0~+60 Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's bandpass filter device is designed to transmit the light of narrow bandwidth, blocking the others. BPF is applied in a fiber laser. High Power Optical Bandpass Filter Features Applications Low Insertion Loss Fiber Laser High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Reliability & Stability EDFA Specifications Parameter Value Center Wavelength 976, 1030, 1064, 1550nm Min. Pass Band Width (@-0.5dB) nm As Customized Max. Stop Bandwidth (@-25dB) nm As Customized Max. Insertion Loss of Passband 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return loss 50dB Max. Power Handling (CW) 20W or Specified Max. Peak Power for ns Pulse 10kW or Specified Max. Tensile Load 5N Operating Temperature 0 ~ +65 Storage Temperature -40 ~ +85 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction; RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Manual Variable Optical Attenuator is used for reducing the light power, by blocking the light with a screw. PM Manual Variable Optical Attenuator Features Applications High Precision Optical Communication Systems Test Wide Attenuation Range Optics Laboratory Low Insertion Loss Specifications Parameter Value Center Wavelength 1310nm 1550nm 1064nm Operating Wavelength Range±40nm ±40nm ±20nm Attenuation Range 0.6~60dB 0.6~60dB 0.6~60dB Max. Insertion Loss 0.6dB 0.6dB 0.6 dB Min. Return Loss 50dB Adjustment Precision 0.02dB Min. Extinction Ratio at 23 20dB Max. Power Handling 500mW Operating Temperature 0 ~ +70 Storage Temperature -40~+85 Package Dimensions 26x18x8mm For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's pump laser protector is one device, which used for blocking the reversed light from sigal, in order to protect the pump diode. Pump Laser Protector Features Applications Low Insertion Loss EDFA High Return Loss Pump Laser High Reliability & Stability Q-Switched Laser Specifications Parameters Values Pass Band Wavelength Range : 960~990nm, or Specified Max.Insertion Loss over Pass Band Wavelength: 0.7dB Blocked Band Wavelength Range: 1020~1100nm or 1500~1600nm, or Specified Min. Isolation at 23 (@Blocked Band Wavelength Range): 25dB Max. Polarization Dependent Loss at 23, only for PI : 0.15dB Min. Extinction Ratio at 23, only for PM: 20dB Min. Return Loss: 50dB Max. Power Handling (CW): 20W Max. Pulsed Power: kW 10 or Specified Max. Wavelength Thermal Stability: 0.003nm/ Max. Insertion Loss Thermal Stability; 0.005dB/ Operating Temperature ï¼?0~+70 Storage Temperature ; -40~+85 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. High Power Optical Isolator (TGG Based) Features Applications Low Insertion Loss PM Fiber Amplifier High Return Loss Testing Instrument High Isolation Mopa Fiber Laser High stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064 or 1030 or 980 or 915 or 850 or 780nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 30dB Min. Isolation at 23 25dB Typ. Insertion Loss at 23 0.8dB Max. Insertion Loss at 23 1.0dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 10W or Specified Max. Peak Power for ns Pulse 10kWor Specified Max. Tensile Load 5N Package Dimension 58x28x26mm Operating Temperature +10~+50 Storage Temperature 0~+60 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)