Wall mount
Dxl series optic fusion unit body, maximum make the optic fiber forming, connection and wiring to be high density while offer the best protection for the cable and can be independence fusion connection unit which install in 19 inch standard stander.
Feature:
Modularize design, frontal operation.
Integrate fusion and wiring, maximum high density.
Can install in 19 sinch standard stander.
Suitable for ribbon and non-ribbon cable.
Can install many kinds of adapter, such as fc, sc, st and lc, etc.
The adapter and equipment use 30 degree card connecting installment, which ensure the jumping wire's curvature radius and can avoid the laser to burn eyes.
Easy operation, complete protection.
The optic fiber and pigtailed all have above 2m saving space.
Function target:
Environment temperature: -40~ 60
Atmospheric pressure: 70kpa~106kpa
Rh: <95% (40 degree)
The inserted exhaustion of optic connector: <0. 3db
The echo exhaustion of optic connector pc type: >40db; upc type: >50db; apc type: >60db
The push-pull durability lifetime of optic connector is greater than 1000 times.
Supplier: Optical fiber patch cord, optical connector, optical fiber cable, plastic optical fiber, media converter, SFP module, ODF, optical fiber attenuator, optical fiber adaptor, optical fiber coupler, ODF/enclosure, CAT5E cable, CAT6 cable, CAT3 cable, CAT7 cable
Services: OEM
Supplier: Fiber optic and wireless products, such as patch cord, bulk cable, keystone jack, flush plate, patch panel, fiber patch cord, fiber connector, fiber adaptor, fiber enclosure, media converter, cable management, shelf, power over ethernet (poe), antenna, cpe, accessories
FEATURES Compliant with IEEE802.3bt 90W output power on 4-pairs Data Rate: 10/100/1000Mbps Full protection for OCP, OLP, and OVP LED indication for power and POE status 2-Pair PDs received power on 2-Pairs Automatic Detection and Protection of Non standard Ethernet Terminals
Features RJ45 Cat.6 unshielded plug ISO/IEC 11801,ANSI/TIA 568 C.2 Insertion force 20N max. (IEC 60603-7-4) Suitable for 23~26AWG, stranded and solid wire Cable outer diameter: 4.5~7.5mm Easy, quickly, reliable and comfortable installation Suitable for cabling from home networks to large data centers
FEATURES +/- 48V DC input; 24V Passive PoE output Provide power and access to device at the same time Power-in/Power-out LED display Easy-Positioning design, simple installation for vertical or horizontal direction Dual (DC-in/battery) input power redundancy OVERVIEW PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.
1. Full shielded with zinc alloy housing 2. Rj45 full shielded type 3. 180 straight cable entry 4. Comply with cat.8 and cat.6a 5. Suitable for the poe plus ( ieee 802.3at ) applications 6. Easy, quickly, reliable and comfortable installation 7. Suitable for cabling from home networks to large data centers
FEATURES 1. Compliant with IEEE802.3af and supporting Non-standard POE 2. Power output: 5V/2A 3. Data rate: 10/100Mbps 4. Supporting either mode A or mode B 5. Power/Data cables (21cm) 6. LED indication for DC power OVERVIEW PD2052U is a IEEE802.3af POE Splitter with a network cable and Micro USB cable. It supplies operational power to Raspberry Pi B/B+/2/3 or any other 5V micro USB powered devises. PD2052U enables power current to travel on the Ethernet network cables and eliminates the need to directly connect a power supply to the powered devices.
Features 1.Compliant with ieee802.3af and supporting non-standard poe 2.Power output: 5v/2a 3.Data rate: 10/100mbps 4.Supporting either mode a or mode b 5.Power/data cables (21cm) 6.Led indication for dc power and poe status
1.Compliant with IEEE 802.3af/at 2.Supporting 10/100 Base-T applications 3.4 POE ports with classification identify 4.Total power budget 60W and up to 30W per port 5.POE Power Priority 6.Supports duplex mode (Half/Full) auto-detection 7.LED-indicates for LNK/ACT and Power status 8.Plug and play installation
